Simpli Home Darwin Laundry Cabinet AXCLDYDAR-SS User manual

1/21
DARWIN / GREGG / CLEO
DELUXE 28 INCH LAUNDRY CABINET
WITH FAUCET AND STAINLESS SINK
Model # AXCLDYDAR-SS

2/21
Questions,problems,assemblyhelp,missingparts?
Noneed toreturntheproduct,wewillgladlyhelpandshipyour
replacementpartsfreeofcharge
PleasecallCustomerServiceat1-866-518-0120 ext.262
MondaytoFridaybetween9am–4pmEST
orgoto
www.simpli-home.com/partsrequest
In order to assist you in a timely manner, please have the following information ready:
Model#PartNumberorLetter
PurchasedatDateofPurchase
Ifyouwishtoreturntheproduct,pleasecontacttheretailerwherethe
productwaspurchased.

3/21
Identify all the parts and hardware. Do not discard the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
WARNING: This item contains small parts which can be swallowed by children
and pets. Keep children and pets away during assembly. To avoid danger of
suffocation, always keep plastic bags away from children and pets. We
recommend that you assemble this unit on a carpeted floor to avoid scratches.
We do not recommend the use of power tools for assembly as this could
damage the unit. Only use manual tools.
Requires 2 people for ease of assembly.
To clean, use a soft or slightly damp cloth, then wipe with a clean, drycloth.
Dust with a soft dry cloth.
Do not use ammonia-based cleaning products, as they will damage the finish.
Do not leave liquids or damp cloths on this furniture.
To avoid dulling of the finish, do not place this furniture in direct sunlight.
Please inspect and tighten all screws or bolts on a regular basis to ensure
proper performance and safety of your item.
IMPORTANT: Pleaseread this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
SAFETY INFORMATION
CARE and MAINTENANCE

4/21
PRE-ASSEMBLY INFORMATION Model #AXCLDYDAR-SS
CABINET PARTS
BOTTOM PANEL
QTY 1
FRONT BOTTOM PANEL
QTY 1
RIGHTDOOR
QTY 1
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
A
B
C
D
E
F
RIGHT SIDE PANEL
QTY 1
BACK BOTTOM PANEL
QTY 1
B
C
BACK MIDDLE PANEL
QTY 1
E
LEFT SIDE PANEL
QTY 1
F
FRONT TOP PANEL
QTY 1
LEFT DOOR
QTY 1
G
H
I
J
SS SINK
QTY 1
K
BACK TOP PANEL
QTY 1
K
L
FRONT PANEL
QTY 1

5/21
PRE-ASSEMBLY INFORMATION Model #AXCLDYDAR-SS
DRAIN PARTS
THREAD WASHER
QTY 1
STRAIGHT DRAIN PIPE BLACK
QTY 1
DRAIN CHANNEL BLACK
QTY 1
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
1
DRAIN BOWL ASSEMBLY
QTY 1
2
DRAIN WASHER BLACK
QTY 1
3
4
PIPE WASHER
QTY 1
5
COUPLING BLACK
QTY 1
COUPLING BLACK
QTY 2
PIPE WASHER WHITE
QTY 1
PIPE COVER BLACK
QTY 1
OUTER DRAIN CHANNEL
QTY 1
6
7
8
9
10
11
12
DRAIN PLUG ASSEMBLY
QTY 1

6/21
PRE-ASSEMBLY INFORMATION Model #AXCLDYDAR-SS
FAUCET PARTS
FAUCET BODY
QTY 1
WEIGHT BLOCK
QTY 1
CAM LOCK
QTY 23
SELF-TAPPING SCREW
M4x16 M4x25
QTY17 QTY4
FAUCET WASHER RUBBER
QTY 1
FAUCET WASHER STEEL
QTY 1
BRASS NUT ASSEMBLY
QTY 1
FAUCET SEALING RING
QTY 1
CAM PIN
QTY 23
WOOD DOWEL
QTY 13
Pan Head Phillips Screw M4x23
QTY 4
HANDLE
QTY 2
AA
BB
CC
EE
HARDWARE PARTS
Ⅰ Ⅱ Ⅲ
Ⅳ Ⅴ Ⅵ
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
DD
FF
BB1
BB2

7/21
A
B
F
D
E
C
G
H
I
J
K
AA
COMPONENTS-KEY DIAGRAM Model #AXCLDYDAR-SS
L

8/21
ASSEMBLY Model #AXCLDYDAR-SS
STEP 1
B
II
II
F
II
II
Screw Cam Pins (II) into the pre-drilled small holes on Left Panel(F) and Right Panel(B).

9/21
STEP 2
III
III
III
C
E
A
D
H
I
B
InsertWood Dowels (III) into the pre-drilled hole of Bottom Panel (A), Back Bottom Panel (C),
Back Top Panel (D), Back Middle Panel (E) and Front Top Panel (H).
InsertCam Locks (I) into the pre-drilled hole of Bottom Panel (A), Back Bottom Panel (C),
Back Top Panel (D), Back Middle Panel (E) and Front Top Panel (H).
Attach Bottom Panel (A), Back Bottom Panel (C), Back Top Panel (D), Back Middle Panel (E) and
Front Top Panel (H) to Right Side Panel (B).
ASSEMBLY Model #AXCLDYDAR-SS

10/21
ASSEMBLY Model #AXCLDYDAR-SS
STEP 3
F
II
I
C
A
D
E
H
B
Attach the Left Panel(F) withCam Pins (II) and Dowels into the pre-drilled holes.
Insert Cam Locks (I) into the pre-drilled hole of Bottom Panel(A),Back Bottom Panel(C),
Back Top Panel(D),
Back Middle Panel(E) and Front Top Panel(H).
Tighten with flathead screwdriver.

11/21
STEP 4
II
G
G
UP
Screw Cam Pins (II) into the pre-drilled small holes on Kick Plate Panel(G).
Insert Cam Pins (II) into the pre-drilled holes on both Side Panels.
Insert Cam Locks (I) into the pre-drilled holes on both Side Panels.
Tighten with flathead screwdriver.
ASSEMBLY Model #AXCLDYDAR-SS
L
M4X25
IV
H
Let Self-Tapping Screw (IV) M4x25 go through the hole of Front top
panel(H),then screw into the Front panel(L).

12/21
ASSEMBLY Model #AXCLDYDAR-SS
STEP 5
IV
M4X16
Use Phillips Screwdriver to attach the Right Door hinges to side (B), using Self-Tapping
Screws (IV) M4x16
Use Phillips Screwdriver to attach the Left Door hinges to side (F), using Self-Tapping
Screws (IV) M4x16

13/21
STEP 6
VI
V
Use Phillips Screwdriver to screw the Handle (VI) with Pan Head Philips Screws (V) M4x23.
ASSEMBLY Model #AXCLDYDAR-SS

14/21
ASSEMBLY Model #AXCLDYDAR-SS
STEP 7
BB2
CC
DD
AA
BB1
Place a Rubber Washer (BB) onto the end of the Faucet (AA) and insert the faucet through
the top of the Sink (K).
From underneath the Sink (K), secure the Faucet (AA) to the Sink (K) using a Rubber Washer (BB),
Steel Washer (CC) and Brass Nut Assembly (DD).
Insert faucet sealing ring(EE) into the hole of pipe and screw hosepipe into.
EE

15/21
STEP8
FF
attach the weight block (FF) with the pipe and screw down.
ASSEMBLY Model #AXCLDYDAR-SS

16/21
STEP 9
Place the Sink (K) with the attached Faucet (AA) on top of the cabinet.
ASSEMBLY Model #AXCLDYDAR-SS
AA
K

17/21
ASSEMBLY Model #AXCLDYDAR-SS
STEP10
K
Put the Drain Washer (3) on the top of the drain opening in the Sink (K).
Put the Drain Bowl (2) on the Drain Washer (3) through the drain opening.
From underneath the sink fasten the Threaded Washer (4) onto the Drain Bowl (2) and tighten.
Insert the Drain Plug (1) into the Drain Bowl (2).

18/21
STEP 11
Fasten the nuts of the hoses (not included in package) to the nut ends of the faucet body.
Fasten the nuts of the hoses (not included in package) to the water outlet:
oRed striped hose to Hot water supply
oBlue striped hose to Cold water supply
Ensure to only tighten the nut and not twist the supply hose.
Leakage may occur if hoses are twisted.
ASSEMBLY Model #AXCLDYDAR-SS

19/21
STEP 12
Put a Pipe Washer (5) onto the Straight Drain Pipe (7).
Connect the Straight Drain Pipe (7) to the drain and fasten the Coupling (6).
Put the Coupling (8) into the Straight Drain Pipe (7) and put a Pipe Washer (9) into the
Straight Drain Pipe (7).
Connect the drain channel (10) to the straight drain pipe (7) and fasten with the coupling (8).
On the Drain Channel (10), wrap teflon tape (not included) around the threaded end that
connects to theOuter Drain Channel (12).
Connect the Outer Drain Channel (12) to the Drain Channel (10) and fasten with the Coupling (8).
Insert the Outer Drain Channel (12) into the Drain Channel (10) and cover with the Pipe Cover (11).
ASSEMBLY Model #AXCLDYDAR-SS
K

20/21
STEP 13
Use a Phillips screwdriver to re-align or adjust the hinges that attach the doors to the cabinet.
ASSEMBLY Model #AXCLDYDAR-SS