Oypla 3994 User manual

User Manual
Foot Rest
USER MANUAL Model No: 3994

Make sure all fastenings are tightly in place and that everything is in order before
using the product. This should be checked periodically by an adult.
Do not discard any of the packaging until you have checked that you have all of
the parts and fittings required.
Use the correct fixings as indicated. Do not tighten any of the nuts until the unit is
completely assembled, then finish by tightening all nuts. All nuts must be
tightened before use.
This product is intended for indoor use only.
Never exceed the maximum weight capacity of 15kg.
Only use this product on stable, level and dry ground.
This product is not a toy, and is only to be used for its designated purpose.
Keep fingers, loose clothing and hair away when folding the product.
Do not carry out alterations or modifications to this product.
If the product is damaged or has any defects, please contact cs[email protected]
USER MANUAL Model No: 3994
Safety Instructions
Notice: Ensure you read and fully understand instructions before use
While every attempt is made to ensure the highest degree of protection in all equipment, we cannot
guarantee freedom from injury. The user assumes all risk of injury due to use. All merchandise is sold
on this condition, which no representative of the company can waive or change.

1. Remove the foot stool from its packaging. Turn the product upside down and screw the four
wooden ball feet to the wooden bottom frame with one in each corner.
2. Then turn your foot rest upright and attach the removable padded cushion. Once this is complete
the product is okay to use aslong as all fixings are fitted securely.
USER MANUAL Model No:
USER MANUAL Model No:
Please retain a copy of all instructions for future
consultation.
Imported into the EU by Oypla.com LLP, Uxbridge, UB8 2FX
Assembly Instructions
USER MANUAL Model No: 3994
This product has an adjustable height. This can be
adjusted by placing the metal rods into the holes
on the base of the Foot Rest. As shown on the
image to the left. There are three different height
settings for this product.
Parts List:
If you are missing any of the below parts please contact [email protected]om
Please be aware that you will be referring to this parts list throughout the assembly process.