Simpli Home Wyndenhal brooklyn+max 3AXCCON-06 User manual

1/18
CONNAUGHT HAMPSHIRE SOMERSET//
TALL STORAGE CABINET
MODEL # 3AXCCON-06

DO NOT RETURN
FOR REPLACEMENT PARTS OR OTHER INQUIRIES
PLEASE CONTACT US AT:
PLEASE ENSURE TO HAVE THE
INSTRUCTION BOOKLET
simpli home.com/customer-support-
MODEL #
FROM THE PACKAGING OR
2/18

IMPORTANT : Please read this manual carefully before beginning
assembly of this product Keep this manual for future reference..
SAFETY INFORMATION
CARE and MAINTENANCE
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
This item contains small parts which can be swallowed by children
and pets. Keep children and pets away during assembly. To avoid danger of
suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. We do not recommend the use of power tools for assembly as this
could damage the unit. Only use manual tools.
May require 2 people for ease of assembly.
WARNING:
To clean, use a soft or slightly damp cloth, then wipe with a clean, dry cloth.
Dust with soft dry cloth.
Do not use ammonia-based cleaning products, as they will damage the finish.
Do not leave liquids or damp cloths on this furniture.
To avoid dulling of the finish, do not place furniture in direct sunlight.
Please inspect and tighten all screws or bolts on a regular basis to ensure proper
performance and safety of your item.
3/18

A
PARTS DESCRIPTION
TOP
QTY 1
SIDE
QTY 1 PAIR
LARGE DIVIDER
QTY 1
SMALL DIVIDER
QTY 1
CENTRE SHELF
QTY 1
B C
D E
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 5 pm EST)
PRE-ASSEMBLY INFORMATION
4/18
CABINET SHELF
QTY 4
DOOR
QTY 1 PAIR
F
G H I
DRAWER FRONT
QTY 2
J
DRAWER SIDE
QTY 2 PAIRS
K
DRAWER BACK
QTY 2
L
DRAWER BOTTOM
QTY 2
M
BOTTOM FRAME
QTY 1
BACK
QTY 1 PAIR
MODEL # 3AXCCON-06
Front
Side
Back
Side
Front
Side
Back
Side
Front
Side
Front Side
Front Side

1
PRE-ASSEMBLY INFORMATION
HARDWARE DESCRIPTION
23
4 5
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 5 pm EST)
5/18
ALLEN KEY SCREW
M6 X 30 mm
QTY 27
CAM LOCK PIN
CAM LOCK
QTY 16
WOOD DOWEL
8 X 30 mm
QTY 16
PHILLIPS SCREW
M3 X 15 mm
QTY 8
HANDLE
QTY 2 SETS
MAGNET and PLATE
QTY 2 SETS
PHILLIPS SCREW
ROUND HEAD
M4 X 15 mm
QTY 24
ALLEN KEY
QTY 1
PHILLIPS SCREW
M3 X 12 mm
QTY 12
SHELF SUPPORT
QTY 24
10 11
6
7 8 9
TIPPING RESTRAINT-1 SET
12
HANDLE
QTY 2 SETS
a. M4 x 25mm
b. M4 x 15mm
c. M4 x 25mm
MODEL # 3AXCCON-06
Required -
Flathead screwdriver
Phillips screwdriver
Not Included

COMPONENTS – KEY DIAGRAM
6/18
MODEL # 3AXCCON-06

ASSEMBLY
7/18
MODEL # 3AXCCON-06
STEP 1
STEP 2
1. Slide Drawer Bottom M firmly into slots on Drawer Sides K and Drawer Front J .
1. Attach 4 Cam Lock Pins 2 to back of Drawer Front J .
2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides K .
3. Insert 2 Cam Locks 2 into pre-drilled holes on each Drawer Side K .
4. Use flathead screwdriver secure Cam Locks.

8/18
ASSEMBLY
Repeat Step 1-4 for the second drawer.
MODEL # 3AXCCON-06
STEP 3
1. Use Phillips Screwdriver to attach Handle 9 to Drawer Front J .
STEP 4
1. Align Drawer Back L with Drawer Bottom M and press firmly into slot .
2. Attach back using 2 Allen Key Screws 1 through pre-drilled holes on each Side K .
3. Use Allen Key 4 to tighten screws. Do not over-tighten.
NOTE: The screwdriver is not
included in the hardware pack.

9/18
ASSEMBLY
STEP 5
STEP 6
1. Insert 2 Dowels 3 into pre-drilled holes on Small Divider D .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of
Dowels should be .exposed
3. Attach 2 Cam Lock Pins 2 to Centre Shelf E into guide holes.
4. Align and insert Cam Lock Pins on Centre Shelf E into pre-drilled holes on
Small Divider D .
5. Place 2 Cam Locks 2 into pre-drilled holes on Small Divider D .
6. Use a flathead screwdriver to tighten Cam Locks into Pins.
1. Attach Large Divider C to Centre Shelf E using 3 Allen Key Screws 1 .
2. Use Allen Key 4 to tighten screws. Do not over-tighten.
MODEL # 3AXCCON-06

10/18
ASSEMBLY
STEP 7
1. Insert 2 Dowels 3 into pre-drilled holes on Small Divider D .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of
Dowels should be .
3. Attach to Bottom Frame F using 3 Allen Key Screws 1 through pre-
drilled holes.
4. Use Allen Key 4 to tighten screws. Do not over-tighten.
exposed
Small Divider D
MODEL # 3AXCCON-06

11/18
ASSEMBLY
STEP 8
1. Insert 4 Dowels 3 into pre-drilled holes on each Side B .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of
Dowels should be .exposed
3. Attach 3 Cam Lock Pins 2 to each Side B into guide holes.
4. Align and insert Cam Lock Pins on Sides B into pre-drilled holes on Centre Shelf E .
5. Place 6 Cam Locks 2 into pre-drilled holes on Centre Shelf E .
6. Use a flathead screwdriver to tighten Cam Locks into Pins.
7. Attach Bottom Frame F to Sides B using 4 Allen Key Screws 1 through pre-
drilled holes ( 2 Screws / each Side ).
8. Use Allen Key 4 to tighten screws. Do not over-tighten.
MODEL # 3AXCCON-06

12/18
ASSEMBLY
STEP 9
1. Insert 2 Dowels 3 into top corners of each Side B .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. ½ length of
Dowels should be .
3. Align pre-drilled holes bottom corners of Top A with Dowels 3 in Sides B .
exposed
4. Attach Top A to Sides B and Large Divider C using 9 Allen Key Screws 1 .
5. Use Allen Key 4 to tighten screws. Do not over-tighten.
1. Attach Back Panels I to Back of cabinet using Phillips Screws Round Head 5 into
pre-drilled guide holes.
2. Use Phillips screwdriver to tighten screws. Do not over-tighten.
STEP 10
MODEL # 3AXCCON-06
NOTE: The screwdriver is not
included in the hardware pack.

13/18
ASSEMBLY
STEP 11
1. Attach Hings on Doors H to Sides B using Phillips Screws 7 into pre-drilled guide holes.
2. Attach Magnet Plates 10 to bottom corner of Doors H using Phillips Screws 8 .
into guide holes on Doors H .
3. Attach Magnet 10 to Centre Shelf E using Phillips Screws 8 into guide holes on
Centre Shelf E .
4. Use Phillips screwdriver attach Handles 11 to Doors H .
MODEL # 3AXCCON-06
NOTE: The screwdriver is not
included in the hardware pack.

14/18
ASSEMBLY
STEP 12
1. Use 4 Shelf Supports 6 for each Shelf Cabinet G in desired location.
2. 2 Shelf Supports 6 may be used on back top of each Shelf Cabinets G as a
tipping restraint.
3. Insert assembled Drawers into drawer glides on assembled cabinet.
MODEL # 3AXCCON-06

When you determine the location for your unit, install the Furniture
Tipping Restraint. Carefully follow the instructions on the package.
STEPS 13 & 14
1. To attach Tipping Restraint 12 , fllow instructions on Tipping Restraint package.
15/18
ASSEMBLY
STEP 13
STEP 14
MODEL # 3AXCCON-06
NOTE: The screwdriver is not
included in the hardware pack.

16/18
WARRANTY
Thank you for purchasing a
product. These products have been made to demanding, high-quality standards
and are guaranteed for domestic use against manufacturing faults for a period of
12 months from the date of purchase. This warranty does not affect your
statutory rights.
In case of any malfunction of your product (failure, missing parts, etc.) please
contact us at our toll free service line at 1-866-518-0120 ext. 262 from 9 am to 5
pm, Monday to Friday, Eastern Standard Time or by email at
We reserve the right to repair or replace the defective product, at its discretion.
This product is guaranteed for 12 months if used for normal purposes. Any
warranty is invalid if the product has been overloaded or subject to neglect,
improper use or an attempted repair by other than an authorized agent. Heavy-
duty or daily professional/commercial usage are not guaranteed.
Due to continuous product improvement, we reserve the right to change the
product specifications without prior notice.
This item is hand-crafted and hand-finished with utmost care.
As such, variations and imperfections should be expected and should be
welcomed as the natural beauty of the wood.
Simpli Home – Wyndenhall – Brooklyn + Max
PLEASE NOTE:
simpli-home.com/customer-support.

Question, problems, missing parts?
Before returning please email Customer Support at
or call
Customer Service at 1-866-0518-0120 ext. 262
Monday to Friday between 9 am – 5 pm EST
For more information visit us on our website
Like us on facebook
simpli-home.com/customer-support
www.simpli-home.com
www.facebook.com/simplihomefurnishings
17/18

Upload an image of our furniture in your
home with a short review to our
facebook page and have a chance to
ENTER
TO WIN
Win your choice of any one of
Simpli Home furniture pieces
Free!!!
www.facebook.com/simplihomefurnishings
(draws monthly – shipping included)
(vanities not included)
18/18