Simpli Home WyndenHall AXWSH006 User manual

WARM SHAKER / NORFOLK / LEXINGTON
ENTRYWAY STORAGE BENCH
MODEL # AXWSH006
1/17
SI
M
P
I
I
H O M E
L I F E B Y D E S I G N

FOR REPLACEMENT PARTS OR HELP WITH
ASSEMBLY PLEASE CONTACT US AT:
simpli-home.com/customer-support
PLEASE ENSURE TO HAVE THE MODEL #
INSTRUCTION BOOKLETFROM THE PACKAGING OR
TO RETURN THE PRODUCT:
PLEASE CONTACT THE RETAILER
WHERE THE ITEM WAS PURCHASED FROM
2/17

Upload an image of our furniture
in your home with a short review
to our facebook page for a chance to
ENTER
TO WIN
Win up to $3000 of
Simpli Home furniture!!!
www.facebook.com/simplihomefurnishings
3/17
SI
M
P
I
I
H O M E
L I F E B Y D E S I G N

IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
SAFETY INFORMATION
CARE and MAINTENANCE
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
To clean, use a soft or slightly damp cloth, then wipe with a clean, dry cloth.
Dust with soft dry cloth.
Do not use ammonia-based cleaning products, as they will damage the finish.
Do not leave liquids or damp cloths on this furniture.
To avoid dulling of the finish, do not place furniture in direct sunlight.
Please inspect and tighten all screws or bolts on a regular basis to ensure proper
performance and safety of your item.
4/17

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
MODEL # AXWSH006
A
PARTS DESCRIPTION
5/17
SIDE
QTY 1 PAIR
SEAT
QTY 1
BOTTOM SHELF
QTY 1
DIVIDER
QTY 1 PAIR
DOOR
QTY 3
BACK
QTY 1
BC
DEF
GHI
CABINET SHELF
QTY 1
BOTTOM SUPPORT LEG
QTY 1
CABINET SHELF
QTY 1 PAIR
Front
Side
Back
Side
Back
Side
Front
Side
Back
Side
Back
Side
Front Side

PRE-ASSEMBLY INFORMATION
HARDWARE DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
6/17
MODEL # AXWSH006
123
456
789
10 11
23
ALLEN KEY
QTY 1
CAM LOCK PIN
CAM LOCK
QTY 4 SETS
ALLEN KEY SCREW
M6 X 30 mm
QTY 20
SHELF SUPPORT
QTY 18
ADJUSTABLE HINGE
QTY 6 SETS
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
HANDLE
M4 X 25 mm
QTY 3 SETS
WOOD DOWEL
Ø8 X 30 mm
QTY 8
PHILLIPS SCREW
M3 X 15 mm
QTY 12
PHILLIPS SCREW
M4 X 15 mm
QTY 36
MAGNET AND PLATE
QTY 3 SETS
PHILLIPS SCREW
M4 X 30 mm
QTY 4

COMPONENTS – KEY DIAGRAM
7/17
MODEL # AXWSH006
A
A
B
DD
F
E
EE
H
H
G
C
I

ASSEMBLY
8/17
MODEL # AXWSH006
1. Insert four Dowels 5 into pre-drilled holes in the Back F .
2. Use rubber mallet to tap Dowels 5 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Attach Seat B to Side A using Allen Key Screws 1 through pre-drilled holes
on Back F .
4. Attach two Cam Lock Pins 2 to one Side A using guide holes.
5. Align and insert Cam Lock Pins on Side A into pre-drilled holes on Back F .
6. Insert two Cam Locks 2 into pre-drilled holes on Back F .
7. Using a flathead screwdriver to tighten Cam Locks into Pins.
A
F
B
5
2
1
3
STEP 1

ASSEMBLY
STEP 2
9/17
MODEL # AXWSH006
1. To attach opposite Side A to Seat B and Back F , repeat steps 1.
B
A
A
F
1
3
5
2

ASSEMBLY
STEP 3
10/17
MODEL # AXWSH006
1. Attach Dividers D to Seat B using Allen Key Screws 1 through pre-drilled holes.
A
B
A
D
D
13 3 1

ASSEMBLY
11/17
MODEL # AXWSH006
STEP 4
1. Insert two Wood dowels 5 into pre-drilled holes on each Divider D .
2. Use rubber mallet to tap Dowels 5 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
4. Attach Bottom Shelf C to Sides A and Dividers D using Allen Key Screws 1 through
pre-drilled holes.
5. Attach Bottom Support Leg I into pre-drilled holes of Bottom Shelf C using four
Phillips Screws 10 .
6. Use Phillips screwdriver to tighten Screws. Do not over-tighten.
A
A
D
D
C
I
5
1
3
10

ASSEMBLY
12/17
MODEL # AXWSH006
STEP 5
E
11
7
11
7
1. Attach Adjustable Hinges 11 to Doors E using Phillips Screws 7 into guide holes
on Doors E .
2. Attach Adjustable Hinges on Doors E to Sides A using Phillips Screws 7 into guide
holes on Sides A .
3. Use a Phillips screwdriver to tighten screws. Do not over-tighten.
E
E
E
A
A

ASSEMBLY
13/17
MODEL # AXWSH006
IMPORTANT NOTE:
II
I
7
Tighten the Screw marked II to fasten hinge. The door may need to be adjusted so
that all the spaces between the door and the unit sides are equal. To adjust, follow
instructions:
1. Side adjustment 4 mm
To move the door towards the side panel, loosen screw I and tighten screw II .
To move the door away from the side panel, loosen screw II and tighten screw I .
2. Depth adjustment 4 mm
Loosen screw II ( just one turn ), adjust door to desired position, re-tighten screw .
3. Height adjustment
Loosen screw 7 , adjust door to desired position, re-tighten screw .

ASSEMBLY
STEP 6
14/17
MODEL # AXWSH006
1. Attach Magnet Plates 8 to bottom corner of Doors E using Phillips Screws 6
into guide holes on Doors E .
2. Attach Magnet 8 using Phillips Screws 6 into guide holes on Bottom Shelf C .
3. Use a Phillips screwdriver to attach Handles 4 to Doors E .
B
A
A
E
E
E
C
6
8
6
8
4

ASSEMBLY
STEP 7
15/17
MODEL # AXWSH006
1. Use four Shelf Supports 9 for each Shelf G or H in desired location.
2. Two Shelf Supports 9 may be used on back top of each Shelf G or H as
a tipping restraint.
9
H
H
G

WARRANTY
Thank you for purchasing a Simpli Home – Wyndenhall – Brooklyn + Max
product. These products have been made to demanding, high-quality
standards and are guaranteed for domestic use against manufacturing
faults for a period of 12 months from the date of purchase. This warranty
does not affect your statutory rights.
In case of any malfunction of your product (failure, missing parts, etc.)
please contact us at our toll free service line at 1-866-518-0120 ext. 262
from 9 am to 4 pm, Monday to Friday, Eastern Standard Time or by email at
simpli-home.com/customer-support.
We reserve the right to repair or replace the defective product, at its
discretion.
This product is guaranteed for 12 months if used for normal purposes.
Any warranty is invalid if the product has been overloaded or subject to
neglect, improper use or an attempted repair by other than an authorized
agent. Heavy-duty or daily professional/commercial usage are not
guaranteed.
Due to continuous product improvement, we reserve the right to change
the product specifications without prior notice.
16/17
SI
M
P
I
I
H O M E
L I F E B Y D E S I G N

Question, problems, missing parts?
Before returning your product
please email Customer Support at
simpli-home.com/customer-support
or call
Customer Support at 1-866-518-0120 ext. 262
Monday to Friday between 9 am – 4 pm EST
For more information visit us on our website
www.simpli-home.com
Like us on facebook
www.facebook.com/simplihomefurnishings
17/17
SI
M
P
I
I
H O M E
L I F E B Y D E S I G N