Simpli Home brooklyn+max WyndenHall AXCRWSH72-LGB User manual

Warm Shaker / Norfolk / Lexington
72 inch Wide TV Media Stand
Model # AXCRWSH72-LGB
TM
TM
1

2
It's time to register your product warranty.
It's quick and easy. And you'll be happy you did.
simpli-home.com/product-registration
Great quality is a right.
Thank you for shopping with Simpli Home,
America's top brand for high-value furniture.
Activate your 1-year warranty
Automatic entry to win a $500 gift certificate
Earn instant rewards and save
ü
ü
ü

3
Review your product and collect rewards!
Thank you for your purchase! We hope you enjoy it. We’d love
your feedback. Please share a review and get instant rewards!
simpli-home.com/product-review
Share photos and get your cash back!
Send us images or share them on social and qualify for instant
rewards. You may even receive store credit on your entire purchase!
simpli-home.com/share-images

4
For Fastest Customer Service:
1. Open your phone’s camera.
2. Point your phone’s camera at the QR code to scan.
3. Click on the pop up.
4. You’ll be taken to our customer service page.
5. Fill the form with your order information and issue.
6. Submit form.
7. A customer service associate will contact you.
Other ways to contact us…
Visit Us
Visit our site directly at
www.simpli-home.com
Email Us
[email protected]
Call Us
1-866-518-0120
Monday to Friday
9am to 5pm EST
*If you’ve purchased from a retailer and you wish to return the product, please
contact the retailer directly.

CAUTION: Injuries and damage can occur from furniture tip over if product is
not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint
provided with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required.
Hardware package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
Safety Information
IMPORTANT : Please read this manual carefully before beginning assembly
of this product. Keep this manual for future reference.
5

This furniture is designed for indoor use.
Perhaps the greatest environmental damage to wood furniture comes from wide swings in
relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity
rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and
contracts unequally along different grain directions. As humidity changes, the components
of wooden objects are continually pushing and pulling against each other. This pressure
often results in parts of furniture no longer fitting together closely or becoming distorted
or breaking from their own internal stresses.
The response to relative humidity changes begins with determining the annual average RH
for your particular space. Then try to keep the RH in the space where your furniture is as
close to that average as possible, generally within about 10% up or down. De-humidify in
the summer and humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern
heating systems, which can drive down interior RH in the winter, almost invariably cause
problems for furniture. To counteract their effect, you can either modify the RH by keeping
furniture containing spaces cooler in the winter or most importantly, have a good working
humidifier for your home. A humidistat automatically works to balance the humidity in
your home so it is constant. Dry indoor air can suck enough moisture from its surroundings
to do permanent damage to wood, causing it to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how
rapidly a wood will lose moisture are pore size and surface hardness. A piece made from a
dense and hard wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished
piece while pieces with veneer finishes are not only stronger but lose moisture more slowly
than other finishes.
To help protect your wood furniture, take these steps:
·Use a humidifier, preferably one with an automatic control system that can sense the
humidity level and adjust itself accordingly
·Don't over-humidify; that can damage wood by causing it to expand and contract
·Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp
·If you can avoid it, don't put furniture near heating vents; if you can’t, keep the
item 3 to 4 inches away from the wall, giving the heat and air space to circulate
·Dust with soft dry cloth
·Do not use liquid or aerosol products
·To avoid marking, do not place rubber on surface (foot pads, etc.)
·For soil build-up, wipe with damp cloth & dry
·Do not use abrasive cleaners
Care & Maintenance
6

WARNING Do not place toys, food, etc. on the top shelves or upper drawers.
Serious injury or death may occur when children climb on furniture. A remote
control or items placed on the furniture may encourage a child to climb on the
furniture and as a result make it top-heavy and cause it to tip over on the child.
WARNING Do not place a TV that exceeds the weight limits or size guidelines
shown in the instructions specified for the furniture. Do not overload shelves
or place heavy items on top shelves or drawers.
Improper use of furniture to support TVs may result in serious injury or death.
WARNING Do not relocate audio and/or video equipment to furniture not
specifically designed to support audio and/or video equipment. Do not move
furniture without shelves or drawers unloaded. Furniture can collapse or tip
over onto a child and cause physical injury or death.
This TV Stand does not come with legible instructions pertaining to the risk of
fire and electric shock that is associated with the use of electrical components
such as operation, user-maintenance, loading, storage and as applicable
electrical issues including grounding or double-insulation.
Any use of this item other than that recommended by the manufacturer in this
manual may cause fire, burns, electric shock and/or serious injuries or death.
WARNING
The maximum diagonal CRT television screen size is 25 inch to 27 inch (63.50 cm to
68.58 cm). For use with televisions weighing 220 lbs or less. Using larger or heavier
televisions may cause instability or tip over which can lead to serious injury or even
death.
The recommended maximum width of the television intended for use is 80 inch
(203.2 cm).
MAXIMUM LOAD 220 LBS MAXIMUM LOAD 25 LBS
7

TOP
QTY 1
BOTTOM SHELF
QTY 1
LEFT SIDE
QTY 1
LEFT DIVIDER
QTY 1 LEFT MIDDLE DIVIDER
QTY 1
TOP DIVIDER
QTY 1
A BL
CLDL
E F
RIGHT SIDE
QTY 1
BR
RIGHT DIVIDER
QTY 1
CR
RIGHT MIDDLE DIVIDER
QTY 1
DR
Front / Avant
Front/Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Part Description
Model # AXCRWSH72-LGBPre-Assembly Information
8

SHELF
QTY 2
TOP SHELF
QTY 1 CENTRE SHELF
QTY 1
GH I
LARGE DOOR (L&R Same)
QTY 2 SMALL DOOR (L&R Same)
QTY 2
J K
LEFT BACK PANEL
QTY 1
LL
RIGHT BACK PANEL
QTY 1
LR
TOP BACK PANEL
QTY 1
L1
BOTTOM BACK PANEL
QTY 1
L2
Front / Avant
Warning Label
Part Description
Model # AXCRWSH72-LGBPre-Assembly Information
9

BOTTOM SUPPORT LEG
QTY 2 FLIP DOWN DOOR
QTY 1 DRAWER FRONT
QTY 1
LEFT DRAWER SIDE
QTY 1
M
PL
NO
DRAWER BACK
QTY 1
DRAWER BOTTOM
QTY 1
Q
R
RIGHT DRAWER SIDE
QTY 1
PR
Part Description
Model # AXCRWSH72-LGBPre-Assembly Information
10

HANDLE
M4 X 25 mm
QTY 6 SETS
MAGNET AND PLATE
QTY 4 SETS
PHILLIPS SCREW
M4 X 25mm
QTY 8
HINGE
QTY 2 LATCH
QTY 1
PHILLIPS SCREW
M3.5 X 15mm
QTY 12
ADJUSTABLE HINGE
QTY 8
ALLEN KEY
QTY 1
ALLEN KEY SCREW
M6 X 30mm
QTY 34
PHILLIPS SCREW
ROUND HEAD
M4 X 15mm
QTY 36
CAM LOCK PIN
CAM LOCK
QTY 22 SETS
WOOD DOWEL
Ø8 X 30mm
QTY 28
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
12 3 4
5678
9 10 11 12
PHILLIPS SCREW
M4 X 15mm
QTY 48
SHELF SUPPORT
QTY 12
PHILLIPS SCREW
M3 X 15mm
QTY 16
13 14 16
17
15
PHILLIPS SCREW
M3 X 12mm
QTY 4
FURNITURE TIP OVER RESTRAINT
QTY 1 SET
a. M4 X 25mm - QTY 2
( 1 is extra )
b. M4 X 15mm - QTY 1
c. M4 X 25mm - QTY 1
Hardware Description
Model # AXCRWSH72-LGBPre-Assembly Information
11

A
G
E
H
I
M
MQ
RO
N
I
F
B
L
B R
C
L
C
R
D
L
D
R
P
L
P R
L1
L2
J
K
J
K
L
R
L
L
Front/Avant
Front/Avant
Front/Avant
Front/ Avant
Front/ Avant
Front/ Avant
Front/ Avant
Front/ Avant
Front/ Avant
Model # AXCRWSH72-LGBComponents - Key Diagram
12

Step 1
Step 2
2
R
O
O
1. Attach 4 Cam Lock Pins 2 to pre-drilled holes at back of Drawer Front O .
2. Align Cam Lock Pins with guide holes and attach Drawer Sides PL , PR .
3. Insert 2 Cam Locks 2 into guide holes on each Drawer Side PL , PR .
4. Use flathead screwdriver to secure Cam Locks.
1. Slide Drawer Bottom R firmly into slots on Drawer Sides PL , PR and
Drawer Front O .
P
L
P
R
P L
P
R
Model # AXCRWSH72-LGBAssembly
13

Step 3
NOTE: The screwdriver is not
included in the hardware pack.
Step 4
R
Q
O
1
4
R
Q
O
7
1. Use Phillips screwdriver to attach Handle 7 to Drawer Front O .
1. Align Drawer Back Q with Drawer Bottom R and press firmly into slot.
2. Attach Drawer Back Q using 2 Allen Key Screws 1 through guide holes on
each Side PL , PR .
3. Use Allen Key 4 to tighten screws. Do not over-tighten.
P
L
P
R
P
L
P
R
Model # AXCRWSH72-LGBAssembly
14

Step 5
1. Insert 6 Dowels 3 into guide holes on Centre Shelf H .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Attach Centre Shelf H to Middle Dividers DL , DR .
4. Use rubber mallet to tap Middle Dividers DL , DR into Centre Shelf H .
Front / Avant
Front / Avant
Front / Avant
H
3
D
L
D
R
Model # AXCRWSH72-LGBAssembly
15

Step 6
E
GH
1. Insert 2 Dowels 3 into guide holes on bottom of Top Divider E .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Attach Top Shelf G to Top Divider E using 3 Allen Key Screws 1 .
4. Use Allen Key 4 to tighten Screws. Do not over-tighten.
3. Attach 6 Cam Lock Pins 2 to Top Shelf G using pre-drilled holes.
4. Align Cam Lock Pins with guide holes on Middle Dividers DL , DR .
5. Insert 6 Cam Locks 2 into guide holes on Middle Dividers DL , DR
(3 Cam Locks on each Middle Divider).
6. Use flathead screwdriver to secure Cam Locks.
D
L
D
R
Front/ Avant
Front/ Avant
Front/ Avant
Front/ Avant
3
1
4
2
Model # AXCRWSH72-LGBAssembly
16

Step 7
H
G
1. Insert 4 Dowels 3 into guide holes on Top Shelf G (2 dowels on each side).
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Attach 6 Cam Lock Pins 2 to Dividers CL , CR using pre-drilled holes
(3 pins on each Divider).
4. Align Cam Lock Pins with guide holes on Top Shelf G .
5. Insert 6 Cam Locks 2 into guide holes on Top Shelf G (3 Cam Locks on each side).
6. Use flathead screwdriver to secure Cam Locks.
D L
D
R
C
L
C R
Front / Avant
Front / Avant
Front / Avant
Front/ Avant
Front / Avant
Front/Avant
2
3
Model # AXCRWSH72-LGBAssembly
17

Step 8
1. Insert 2 Dowels 3 into guide holes on bottom of each Divider CL , CR and
Middle Divider DL , DR .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Attach Bottom Shelf F to Dividers CL , CR and Middle Dividers DL , DR
using 12 Allen Key Screws 1 .
4. Use Allen Key 4 to tighten Screws. Do not over-tighten.
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
F
C
R
C L
D
L
D
R
Front / Avant
Front / Avant
3
4
1
1
Model # AXCRWSH72-LGBAssembly
18

Step 9
1. Insert 4 Dowels 3 into guide holes on Bottom Shelf F .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Attach 3 Cam Lock Pins 2 to each Side BL , BR using pre-drilled holes.
4. Align Cam Lock Pins with guide holes on Bottom Shelf F .
5. Insert 6 Cam Locks 2 into guide holes on Bottom Shelf F .
6. Use flathead screwdriver to secure Cam Locks.
7. Attach Bottom Support Legs M to Bottom Shelf F using 8 Phillips Screws 16
(4 Phillips Screws on each Bottom Support Leg).
8. Use Phillips screwdriver to snugly tighten screw.
Front / Avant
Front / Avant
Front / Avant
Front / Avant
F
B
L
B
R
M
M
16
3
2
Model # AXCRWSH72-LGBAssembly
19

Step 10
C
L
C
R
A
B
L
B
R
E
1. Insert 2 Dowels 3 into guide holes on each Side BL , BR .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Attach Top A to Sides BL , BR , Dividers CL , CR and Top Divider E using 15
Allen Key Screws 1 (3 screws on each Side and Divider).
4. Use Allen Key 4 to tighten Screws. Do not over-tighten.
1
4
1
4
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
3
3
Model # AXCRWSH72-LGBAssembly
20