Simpli Home WyndenHall brooklyn + max AXCAMH72-BL User manual

AMHERST / HALIFAX / WASHINGTON
72 INCH WIDE TV MEDIA STAND
MODEL # AXCAMH72-BL
/311
TM
TM
SI
M P
HOME®
LIFE BY DESIG N

/312
TM
TM
SI
M P
HOME®
LIFE BY DESIG N
Questions, problems, assembly help, missing parts?
No need to return the product, we will gladly help and ship your
replacement parts free of charge
Please call Customer Service at 1-866-518-0120 ext. 262
Monday to Friday between 9 am –4 pm EST
or go to
www.simpli-home.com/parts request
In order to assist you in a timely manner, please have the following
information ready:
Model # _________________Part Number or Letter_____________________
Purchased at ____________Date of Purchase _________________________
If you wish to return the product, please contact the retailer where the
product was purchased.

/313
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
CAUTION: Injuries and damage can occur from furniture tip over if product is
not properly anchored to the wall. Use the Furniture Anti-Tipping Restraint
provided with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required.
Hardware package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.
SAFETY INFORMATION

/314
Perhaps the greatest environmental damage to wood furniture comes from wide swings in
relative humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity
rises and falls, and in doing so it swells and shrinks. Making matters worse, it expands and
contracts unequally along different grain directions. As humidity changes, the components
of wooden objects are continually pushing and pulling against each other. This pressure
often results in parts of furniture no longer fitting together closely or becoming distorted
or breaking from their own internal stresses.
The response to relative humidity changes begins with determining the annual average RH
for your particular space. Then try to keep the RH in the space where your furniture is as
close to that average as possible, generally within about 10% up or down. De-humidify in
the summer and humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern
heating systems, which can drive down interior RH in the winter, almost invariably cause
problems for furniture. To counteract their effect, you can either modify the RH by keeping
furniture containing spaces cooler in the winter or most importantly, have a good working
humidifier for your home. A humidistat automatically works to balance the humidity in
your home so it is constant. Dry indoor air can suck enough moisture from its surroundings
to do permanent damage to wood, causing it to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how
rapidly a wood will lose moisture are pore size and surface hardness. A piece made from a
dense and hard wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished
piece while pieces with veneer finishes are not only stronger, but lose moisture more
slowly than other finishes.
To help protect your wood furniture, take these steps:
·Use a humidifier, preferably one with an automatic control system that can sense the
humidity level and adjust itself accordingly. Don't over-humidify; that can damage wood
by causing it to expand and contract.
·Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
·If you can avoid it, don't put furniture near heating vents. If you must, keep the piece 3
to 4 inches away from the wall, giving the heat and air space to circulate.
·Dust with soft dry cloth.
·Do not use liquid or aerosol products.
·To avoid marking, do not place rubber on surface (foot pads, etc.)
·For soil build-up, wipe with damp cloth & dry.
·Do not use abrasive cleaners.
CARE and MAINTENANCE
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.

PART DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION MODEL # AXCAMH72-BL
/315
.A
TOP
QTY 1 LEFT SIDE
QTY 1 RIGHT SIDE QTY 1
BOTTOM SHELF
QTY 1
.C
TOP SHELF
QTY 1
.D.E
CENTRE SHELF
QTY 1
LEFT MIDDLE DIVIDER
QTY 1
.F.GL
.BL .BR
.GR
TOP DIVIDER
QTY 1 RIGHT MIDDLE DIVIDER
QTY 1
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant

PART DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION MODEL # AXCAMH72-BL
/316
.HL
LEFT DIVIDER
QTY 1 RIGHT DIVIDER
QTY 1 SHELF QTY 2
LARGE DOOR (L&R Same)
QTY 2
.J.K.LL
LEFT BACK PANEL
QTY 1
TOP BACK PANEL
QTY 1
.LR .L1
BOTTOM BACK PANEL
QTY 1
.HR .I
.L2
RIGHT BACK PANEL
QTY 1
SMALL DOOR (L&R Same)
QTY 2
Front /
Avant
Front /
Avant
Warning Label

PART DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION MODEL # AXCAMH72-BL
/317
.M
BOTTOM SUPPORT LEG
QTY 2 FLIP DOWN DOOR
QTY 1 DRAWER FRONT QTY 1
LEFT DRAWER SIDE
QTY 1
.PL .PR .Q
DRAWER BACK
QTY 1
.R
.N.O
DRAWER BOTTOM
QTY 1
RIGHT DRAWER SIDE
QTY 1

PRE-ASSEMBLY INFORMATION MODEL # AXCAMH72-BL
/318
HARDWARE DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
HANDLE
M4 X 25 mm
QTY 6 SETS
ALLEN KEY
QTY 1
ALLEN KEY SCREW
M6 X 30mm
QTY 34
PHILLIPS SCREW
ROUND HEAD
M4 X 15mm
QTY 39
CAM LOCK PIN
CAM LOCK
QTY 22 SETS
WOOD DOWEL
Ø8 X 30mm
QTY 22
SHELF SUPPORT
QTY 12
.1.2.3.4
.5.6.7.8
.9.10 .11 .12
.13 .14 .15
MAGNET AND PLATE
QTY 4 SETS
ADJUSTABLE HINGE
QTY 8
HINGE
QTY 2 LATCH QTY 1 SET
PHILLIPS SCREW
M3.5 X 15mm
QTY 12
PHILLIPS SCREW
M3 X 15mm
QTY 16
PHILLIPS SCREW
M3 X 12mm
QTY 4
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
PHILLIPS SCREW
M4 X 25mm
QTY 8
a.M4X25mm-QTY2
(1isextra)
b.M4X15mm-QTY1
c.M4X25mm-QTY1
.16
PHILLIPS SCREW
M3.5 X 15mm
QTY 48
.17
FURNITURE TIP OVER RESTRAINT
QTY 1 SET

Front /
Avant
COMPONENTS-KEY DIAGRAM MODEL # AXCAMH72-BL
/319
MM
LR
LL
L1
L2
K
I
HL HR
GL GR
E
N
D
BL
BR
A
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
Front /
Avant
K
J
J
I
C
O
PR
PL
Q
R
F

ASSEMBLY MODEL # AXCAMH72-BL
/3110
STEP-1
P
X
1. Attach four Cam Lock Pins 2 into pre-drilled holes on back of Drawer Front O .
2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten.
STEP-2
1.AlignCamLockPinswithguideholesandattachDrawerSides PL ,PR toDrawerFrontO.
2.InserttwoCamLocks2intoguideholesoneachDrawerSide PL , PR .
3.UsePhillipsscrewdrivertosecureCamLocks.Donotover-tighten.
2
2
O
O
PR
PR
PL
2
2
2
2
O
O
PR
PL
PL

ASSEMBLY MODEL # AXCAMH72-BL
/3111
STEP-3
1.SlideDrawerBottomRfirmlyintoslotsonDrawerSidesPL,PRandDrawerFrontO.
STEP-4
1. Align Drawer Back Q with Drawer Bottom R and press firmly into slot .
2. Attach Drawer Back using two Allen Key Screws 1 through guide holes on
each Drawer Side PL , PR .
3. Use Allen Key 4 to tighten Screws. Do not over-tighten
OO
PR PR
PL PL
R
R
1
4
OO
PR PR
PL PL
R
QQ
STEP-5
1. Use Phillips screwdriver to attach Handle 7 to Drawer Front O .
O
7

ASSEMBLY MODEL # AXCAMH72-BL
/3112
STEP-6
1. Insert six Dowels 3 into guide holes on Centre Shelf E .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Attach Hinge 10 to Centre Shelf E by using Phillips Screws 11 to attach Centre
Shelf E through guide holes.
4. Use Phillips Screwdriver to tighten screws. Do not over-tighten.
STEP-7
1. Insert four Dowels 3 into guide holes on Dividers GL , GR .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3311
10
E
Front /
Avant
GR
Front /
Avant
Front /
Avant
GL
3
3

ASSEMBLY MODEL # AXCAMH72-BL
/3113
STEP-8
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
1. Align Wood Dowels with guide holes and
attach Centre Shelf E to Dividers GL , GR .
E
E
GL
GL
GR
GR

ASSEMBLY MODEL # AXCAMH72-BL
/3114
STEP-9
STEP-10
P
X
1. Attach six Cam Lock Pins 2 into pre-drilled holes on Top Shelf D .
2. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten.
D
22
2
1. Use three Allen Key Screws 1 to attach Top Divider F
through guide holes from Top Shelf D to pre-drilled holes of Top Divider F .
2. Use Allen Key 4 to tighten Screws. Do not over-tighten.
Front / Avant
Front / Avant
Front / Avant
DD
FF
1
1
4

ASSEMBLY MODEL # AXCAMH72-BL
/3115
STEP-11
2. Insert six Cam Locks 2 into guide holes on Middle Dividers GL , GR
(3 Cam Locks on each Middle Divider).
3. Use Phillipsscrewdriver to secure Cam Locks. Do not over-tighten.
Front / Avant
Front / Avant
Front / Avant
Front / Avant
1. Align Cam Lock Pin with guide holes on
Middle Dividers GL , GR and attach
Middle Dividers GL , GR to Top Shelf D .
2
GL
GR
Front / Avant
GL
GR
Front / Avant
D
D

ASSEMBLY MODEL # AXCAMH72-BL
/3116
STEP-12
HL HR
P
X
Front /
Avant
2
3
1. Insert two Dowels 3 into guide holes on each Divider HL , HR .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Attach three Cam Lock Pins 2 into pre-drilled holes on each Divider HL , HR .
4. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten.
3
22
STEP-13
1. Insert Dowels 3 into guide holes on Bottom Shelf C .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3
3
C
Front /
Avant
3
Front /
Avant

ASSEMBLY MODEL # AXCAMH72-BL
/3117
STEP-14
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
GL
GR
D
HL
HR
HL
HR
D
GL
GR
1. Align Cam Lock Pins with guide holes on
Top Shelf D and attach Dividers HL , HR
to Top Shelf D .
2
2. Insert six Cam Locks 2 into guide holes on Top Shelf D .
3. Use Phillipsscrewdriver to secure Cam Locks. Do not over-tighten.

ASSEMBLY MODEL # AXCAMH72-BL
STEP-15
/3118
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
HL
GL
GR
HR
C
C
HL
GL
GR
HR
1. Align Wood Dowels with guide holes on Bottom Shelf C and attach parts HL , HR ,
GL , GR to Bottom Shelf C .
2. Use three Allen Key Screws 1 to attach each part HL , HR , GL , GR through guide
holes from Bottom Shelf C to pre-drilled holes of parts HL , HR , GL , GR .
3. Use Allen Key 4 to tighten Screws. Do not over-tighten.
1
1
1
1
1
4

ASSEMBLY MODEL # AXCAMH72-BL
/3119
STEP-16
P
X
2
1. Insert two Dowels 3 into guide holes on each Side BL , BR .
2. Use rubber mallet to tap Dowels 3 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Attach three Cam Lock Pins 2 into pre-drilled holes on each Side BL , BR .
4. Use Phillips screwdriver to secure Cam Lock Pins. Do not over-tighten.
3
Front /
Avant
Front /
Avant
2
2
3
3
BL
BR

ASSEMBLY MODEL # AXCAMH72-BL
/3120
STEP-17
1. Align Wood Dowels and Cam Lock Pins
with guide holes on Bottom Shelf C
and attach Sides BL , BR to
Bottom Shelf C .
2. Insert six Cam Locks 2 into guide holes on Bottom Shelf C .
3. Use Phillipsscrewdriver to secure Cam Locks. Do not over-tighten.
2
BL
C
C
BL
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
Front / Avant
BR
BR