Sauder Orchard Hills 418648 User manual

Need help? Visit Sauder.com to view video assembly tips or chat with a live rep.
Prefer the phone? Call 1-800-523-3987.
Share your journey!
sauder.com
The oriinal desktop.
NOTE: THIS INSTRUCTION
BOOKLET CONTAINS IMPORTANT
SAFETY INFORMATION.
PLEASE READ AND KEEP FOR
FUTURE REFERENCE.
Enlish p 1-40
Français p 41-44
Español p 45-48
Lot # 370226 04/21/15
Purchased: __________________
Be sure to ive us a rin before
makin any returns. 1-800-523-3987
Corner Computer Desk
Orchard Hills Collection | Model 418648

Table of Contents Assembly Tools Required
Part Identification
Hardware Identification
Assembly Steps
Français
Español
Safety
Warranty
Hammer
Not actual size
No. 2 Phillips Screwdriver
Tip Shown Actual Size
Skip the power trip.
This time.
2-3
4-6
7-40
41-44
45-x48
49-50
51
A RIGHT END (1)
B LEFT END (1)
C RIGHT CPU END (1)
D LEFT CPU END (1)
D24 SMALL RIGHT DRAWER SIDE (2)
D25 SMALL LEFT DRAWER SIDE (2)
D149 SMALL DRAWER BACK (2)
D151 DRAWER BACK (1)
D28 RIGHT DRAWER SIDE (1)
D29 LEFT DRAWER SIDE (1)
D953 SMALL DRAWER BOTTOM (2)
D954 DRAWER BOTTOM (1)
E RIGHT TOP (1)
F LEFT TOP (1)
G MODESTY PANEL (2)
H BOTTOM (1)
I BACK (2)
J BRACE (2)
K DOOR (1)
L ADJUSTABLE SHELF (1)
M RIGHT LEG (1)
N LEFT LEG (1)
O KEYBOARD UPRIGHT (2)
P KEYBOARD SHELF (1)
Q DRAWER FRONT (1)
V SMALL DRAWER FRONT (2)
AA RIGHT FRONT MOLDING (1)
BB LEFT FRONT MOLDING (1)
CC RIGHT MOLDING (1)
DD LEFT MOLDING (1)
EE BASE (2)
FF CONNECTOR PLATE (1)
418648 www.sauder.com/servicesPae 2
Part Identification
åWhile not all parts are labeled, some of the parts will have a label or an inked letter on the ede
to help distinuish similar parts from each other. Use this part identification to help identify similar parts.
Now you know
our ABCs.

Part Identification
A
B
C
D
E
F
G
G
H
I
I
J
J
K
L
M
N
O
O
P
AA
BB
CC
DD
EE
EE
FF
D24
D24
D25
D25
D149
D149
D151
D28
D29
D953
D954
D953
Q
V
V
418648www.sauder.com/services Pae 3

Hardware Identification
418648 www.sauder.com/servicesPae 4
35AW CABINET RIGHT - 1
35AY DRAWER RIGHT - 1 35AZ DRAWER LEFT - 1
35AX CABINET LEFT - 1
FILE GLIDE - 2
15B
35DA CABINET RIGHT - 2 35DB CABINET LEFT - 2
35DC DRAWER RIGHT - 2 35DD DRAWER LEFT - 2
(EXTENSION SET SHOWN SEPARATED)
EXTENSION RAIL - 2
GG EXTENSION SLIDE - 2 HH
10A SLIDE CAM - 6
åScrews are shown actual size. You may receive extra hardware with your unit.
FILE ROD - 2
7B

Hardware Identification
418648www.sauder.com/services Pae 5
116K KNOB - 1 120K BACKPLATE - 1 121K PULL MOUNT- 6
HIDDEN CAM - 16
1F CAM DOWEL - 16 2F
FELT DISC CARD - 1
1M
ANGLE BRACKET - 7
5G
HIDDEN CONNECTOR - 6
5F
CORD CLIP - 1
4P METAL PIN - 9 1R
MOLDING
CONNECTOR - 2
19F HINGE - 2 6H
NAIL - 30
1N
RUBBER SLEEVE - 4
2R
PULL - 3
123K
åScrews are shown actual size. You may receive extra hardware with your unit.

Hardware Identification
åScrews are shown actual size. You may receive extra hardware with your unit.
418648 www.sauder.com/servicesPae 6
BLACK 1-1/4" FLAT HEAD SCREW - 12
7S
BLACK 9/16" LARGE HEAD SCREW - 22
1S
BLACK 1-1/8" PAN HEAD SCREW - 6
9S
BLACK 1-1/8" MACHINE SCREW - 1
21S
15S SILVER 5/8" MACHINE SCREW - 6
CONNECTOR SCREW - 6
8S
BLACK 1-7/8" FLAT HEAD SCREW - 11
2S
18S BROWN 1" FLAT HEAD SCREW - 4
3S GOLD 5/16" FLAT HEAD SCREW - 28
30S BLACK 1-9/16" FLAT HEAD SCREW - 12

418648www.sauder.com/services Pae 7
Look for this icon. It means a
video assembly tip is available at
www.sauder.com/services/tips
Step 1
å Assemble your unit on a carpeted floor or on the empty
carton to avoid scratchin your unit or the floor.
å Push two HIDDEN CONNECTORS with SCREW into
the LEGS (M and N). Repeat this step for both
KEYBOARD UPRIGHTS (O).
Step 2
å Insert a CONNECTOR SCREW (8S) into each HIDDEN
CONNECTOR (5F).
5F
5F
M
N
8S

å Push sixteen HIDDEN CAMS (1F) into the ENDS (A, B, C,
and D), BOTTOM (H), and BRACES (J). Then, insert the
metal end of a CAM DOWEL (2F) into each HIDDEN CAM.
Step 3
418648 www.sauder.com/servicesPae 8
Arrow
1F
2F
(16 used)
Arrow
1F
2F
Insert the metal end of the CAM
DOWEL into the HIDDEN CAM.
Arrow
Do not tihten the HIDDEN CAMS in this step.
A
B
C
D
H
Just think. The sooner
you do this, the sooner
you do somethin else.
J
J

å Separate the EXTENSION SLIDES (HH) from the
EXTENSION RAILS (GG) as shown in the upper diaram.
Be prepared, the parts are reasy.
å Fasten the EXTENSION RAILS (GG) to the ENDS (A and B).
Use four GOLD 5/16" FLAT HEAD SCREWS (3S).
å NOTE: For each EXTENSION RAIL, turn a SCREW into
the hole shown in the enlared diaram. Then, slide the
inner cartride of the EXTENSION RAIL out to find the
other hole that lines up with the hole in the END. Turn a
SCREW into this hole.
Step 4
418648www.sauder.com/services Pae 9
A
B
Open end
Open end
Push the black lever in and pull the SLIDE from the RAIL.
GG
GG
GG
HH
Finished ede
Finished ede
GOLD 5/16" FLAT HEAD SCREW
(4 used in this step)
3S

å Fasten the CABINET RIGHTS (35DA) and CABINET
LEFTS (35DB) to the ENDS (A and B). Use eiht GOLD
5/16" FLAT HEAD SCREWS (3S).
Step 5
418648 www.sauder.com/servicesPae 10
35DA
35DA
35DB
35DB
Roller end
Roller end
A
B
Finished ede
Finished ede
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
3S

å Tap a MOLDING CONNECTOR (19F) into the notches in
the MOLDINGS (BB and DD).
å Repeat this step for theMOLDINGS (AA and CC).
Step 6
418648www.sauder.com/services Pae 11
Use your hammer to tap the MOLDING CONNECTOR (19F) into the notches in the MOLDINGS.
Flat end
BB
DD
19F

Step 7
å Fasten the MOLDINGS (BB and DD) to the LEFT TOP (F).
Use six BLACK 1-1/4" FLAT HEAD SCREWS (7S).
418648 www.sauder.com/servicesPae 12
F
BB
DD
Unfinished surface
Lon finished ede
BLACK 1-1/4" FLAT HEAD SCREW
(6 used in this step)
7S

å Fasten the MOLDINGS (AA and CC) to the RIGHT TOP (E).
Use six BLACK 1-1/4" FLAT HEAD SCREWS (7S).
Step 8
418648www.sauder.com/services Pae 13
Unfinished
surface
Lon finished ede
E
AA
CC
BLACK 1-1/4" FLAT HEAD SCREW
(6 used in this step)
7S

å Insert four METAL PINS (1R) into the ENDS (A and B).
å Fasten the BRACES (J) to the ENDS (A and B). Tihten
four HIDDEN CAMS.
Step 9
418648 www.sauder.com/servicesPae 14
A
B
J
J
This holes must be here.
This holes must be here.
Surface with HIDDEN CAMS
Surface with HIDDEN CAMS
Finished ede
Finished ede
Start Tighten
Arrow
Minimum
190 derees
Caution
Risk of damae or
injury. HIDDEN CAMS
must be completely
tihtened. HIDDEN
CAMS that are not
completely tihtened
may loosen, and parts
may separate. To
completely tihten:
Arrow
Maximum
210 derees
1R
1R

å Fasten three ANGLE BRACKETS (5G) to the ENDS (A
and B) and BRACE (J). Use three BLACK 9/16" LARGE
HEAD SCREWS (1S).
å NOTE: Be sure the edes of the ANGLE BRACKETS are
even with the edes of the ENDS and BRACE.
å Fasten the BASE (EE) to the ENDS (A and B) and BRACE (J).
Use three BLACK 9/16" LARGE HEAD SCREWS (1S).
Step 10
418648www.sauder.com/services Pae 15
A
B
J
J
EE
5G
5G
5G
Rounded ede
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
1S

å Fasten the BOTTOM (H) to the CPU ENDS (C and D).
Tihten four HIDDEN CAMS.
Step 11
418648 www.sauder.com/servicesPae 16
C
D
H
Arrow
Minimum
190 derees
Maximum
210 derees
This holes must be here.
Finished ede
Finished ede
Unfinished
surface

å Fasten three ANGLE BRACKETS (5G) to the CPU
ENDS (C and D) and BOTTOM (H). Use three BLACK
9/16" LARGE HEAD SCREWS (1S).
å NOTE: Be sure the edes of the ANGLE BRACKETS are
even with the edes of the ENDS and BOTTOM.
å Fasten the BASE (EE) to the CPU ENDS (C and D)
and BOTTOM (H). Use three BLACK 9/16" LARGE
HEAD SCREWS (1S).
Step 12
418648www.sauder.com/services Pae 17
5G
5G
5G
C
D
H
EE
Rounded ede
BLACK 9/16" LARGE HEAD SCREW
(6 used in this step)
1S

å IMPORTANT: You have the choice of assemblin the unit two
ways. If you want the drawers on the riht side of the desk,
fasten the ENDS (A and B) to the RIGHT TOP (E). If you
want the drawers on the left side of desk, fasten the
ENDS (A and B) to the LEFT TOP (F). The followin steps
show the drawers bein attached to the riht side of your desk.
Step 13
418648 www.sauder.com/servicesPae 18
DRAWERS ON THE LEFT SIDE OF DESK
DRAWERS ON THE RIGHT SIDE OF DESK
A
A
B
E
E
F
F
B

å Fasten the ENDS (A and B) to the RIGHT TOP (E). Tihten
four HIDDEN CAMS.
Step 14
418648www.sauder.com/services Pae 19
A
B
E
Unfinished ede
Arrow
Minimum
190 derees
Maximum
210 derees
Lon unfinished ede

å Insert a METAL PIN (1R), used for alinment, into the RIGHT
TOP (E).
å Fasten the CONNECTOR PLATE (FF) to the RIGHT TOP (E).
Use three BLACK 1-1/8” PAN HEAD SCREWS (9S).
Step 15
418648 www.sauder.com/servicesPae 20
E
FF
BLACK 1-1/8" PAN HEAD SCREW
(3 used in this step)
1R
9S