Dorel Living DA7202 User manual

Model Number: UPC Code: Color:
DA7202 0-65857-17097-9 Beige
Date of Purchase: _____ / _____ / _____ Lot Number:
(taken from carton)
Congratulations on your latest furniture purchase! Dorel Living furniture has been
developed with quality, convenience and style in mind. We trust it will provide you
with many years of exceptional comfort and service.
Before beginning assembly, we encourage you to familiarize yourself with your new
furniture piece by taking a few minutes to go through this booklet. It contains
important information on our warranty and care tips to keep your furniture looking
as good as new.
Customer satisfaction is important to us at Dorel Asia. Our agents are available
Monday to Friday 8am to 5pm (EST) to answer any question you may have. For
faster service, always have the model number ready when calling our toll free
number 1-800-295-1980 or emailing us at [email protected]
For more great furniture ideas, check out our website at www.dorelliving.com.
You can also keep up to date on all the latest trends by liking our Facebook page.
DO NOT RETURN PRODUCT TO THE STORE. If a part is missing or damaged,
contact our customer service department. We will replace the part FREE of
charge.
NOTE: THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY
INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
3-PC Counter Height Glass/Metal Dining Set

Dust this item regularly with a soft, lint-free cloth to prevent soil build up. Wipe away spills
immediately to prevent staining using a clean cloth dampened with water. Do not use liquid or
abrasive cleaners on the metal frame as this may damage the finish.
MAINTENANCE
Check bolts/screws periodically and tighten them if necessary.
LIMITED WARRANTY
Dust regularly with a soft, dry cloth to prevent soil build up. Keep away from heat to avoid
glazing, melting or scorching. Use a professional cleaning service to clean the fabric.
WARNING: Should this product become damaged, and/or
components are broken or missing, DO NOT USE.
NOTE
CARE AND CLEANING
* To prevent any scratches, please remove all packaging and assemble on a clean, smooth
surface.
*Ensure all parts and components are present before beginning assembly.
*Assemble on soft, smooth surface to prevent damage to product finish.
* Assembly and handling may require two people.
* Estimated assembly time is 45 - 60 minutes.
* Read all instructions completely before assembly.
* Do not use power tools.
CUSTOMER SERVICE
If you are missing parts or have any questions about this product, contact our customer service
representative first!
CALL 1-800-295-1980
You can also order parts by writing to the address listed below. Please include the product
model number, color and a detailed description of the part.
Customer Service Department No. 413
Dorel warrants its product to be free from defects in material and workmanship and agrees to
remedy any such defect. This warranty covers 1 year from the date of original purchase. This
warranty is valid only upon presentation of proof of purchase. This is solely limited to the repair or
replacement of defective furniture components and no assembly labor is included. This
warranty does not apply to any product which has been improperly assembled, subjected to
misuse or abuse or which has been altered or repaired in any way. Any wearing, tearing or
fading of the fabric is not covered under the warranty. This warranty gives you specific legal
rights and you may also have other rights which vary from State to State.
12345 Albert-Hudon Boulevard, Suite 100
Montreal, Quebec
Canada H1G 3L1
E-MAIL: [email protected]
* CAUTION: Adult assembly required.
* Phillips head screw driver is not included.

HARDWARE LIST
1 2
3 4
3-PC COUNTER HEIGHT GLASS/METAL DINING SET
DA7202
PHILLIPS HEAD SCREW
M4
8 PCS
SUCTION CUP
ALLEN KEY
Ø1/4" X 1/2"
Ø5/32" X 1/2"
4 PCS
1 PC
HEX SOCKET HEAD BOLT
40 PCS

PARTS LIST
A B C
D E F
G H I
J K
FRONT LEG
2 PCS
3PC COUNTER HEIGHT GLASS/METAL DINING SET
DA7202
LEFT CONNECTING ROD
2 PCS
BACK FRAME
2 PCS
TABLE FRAME
TABLE LEG
RIGHT BRACE
2 PCS
TABLE TUBE BASE
RIGHT CONNECTING ROD
2 PCS
LEFT BRACE
2 PCS
1 PC
GLASS TOP
1 PC
SEAT CUSHION
2 PCS
1 PC
4 PCS

3PC COUNTER HEIGHT GLASS/METAL DINING SET
DA7202
STEP 1
Attach the left and right connecting rods (C & D) to the back frame (A) with
hex socket head bolts (1).
Attach the left and right braces (E & F) to the back frame (A) with hex socket
head bolts (1).
Use Allen key (4) to install the bolts.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the
following steps.

3PC COUNTER HEIGHT GLASS/METAL DINING SET
DA7202
STEP 2
Attach the front leg (B) to the connecting rods (C & D) and braces (E & F) with
hex socket head bolts (1). Use Allen key (4) to install the bolts.
Tighten all bolts previously installed with Allen key (4).

3PC COUNTER HEIGHT GLASS/METAL DINING SET
DA7202
STEP 3
Place seat cushion (K) and the chair frame upside down on a clean and smooth
surface.
Attach seat cushion (K) to the assembled chair frame with Phillips head screws
(2).
Use a Phillips head screwdriver (not included) to install the screws.
Turn the chair upright.
Repeat step 1 to 3 to assemble the other chair.
NOTE: Phillips head screws (2) will make their own holes. Do not use power tools
and do not over-tighten the screws.

3PC COUNTER HEIGHT GLASS/METAL DINING SET
DA7202
STEP 4
Attach table legs (H) to the table frame (G) with hex socket head bolts (1). Use
Allen key (4) to install the bolts.
NOTE: Do not fully tighten the bolts. Loose bolts will facilitate assembly in the
following steps.

3PC COUNTER HEIGHT GLASS/METAL DINING SET
DA7202
STEP 5
Attach table tube base (I) to the table legs (H) with hex socket head bolts (1).
Use Allen key (4) to install the bolts.
Tighten all bolts previously installed with Allen key (4).

3PC COUNTER HEIGHT GLASS/METAL DINING SET
DA7202
STEP 6
Place suction cups (3) on the table frame (G).
With the help of another person, gently place the glass top (J) on the table
frame (G).
NOTE: Glass top (J) will need to be placed in the middle to prevent it from
slipping.
3