Simpli Home 3AXCCOS72 User manual

COSMOPOLITAN / CITY / ESSEX
72 INCH WIDE TV MEDIA STAND
MODEL # 2 3AXCCOS7
1/21
SI
M
P
I
I
HOME
L I F E B Y D E S I G N

2/21
SI
M
P
I
I
HOME
L I F E B Y D E S I G N
Questions, problems, assembly help, missing parts?
No need to return the product, we will gladly help and ship your
replacement parts free of charge
Please call Customer Service at 1-866-518-0120 ext. 262
Monday to Friday between 9 am – 4 pm EST
or go to
www.simpli-home.com/parts request
In order to assist you in a timely manner, please have the following information ready:
Model # _______________________ Part Number or Letter_______________________
Purchased at ___________________Date of Purchase ___________________________
If you wish to return the product, please contact the retailer where the
product was purchased.

3/21
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.
SAFETY INFORMATION
CAUTION: Injuries and damage can occur from furniture tip over if product is not
properly anchored to the wall. Use the Furniture Anti-Tipping Restraint provided
with the product. Consult our assembly instructions for help.
If the Furniture Anti-Tipping Restraint kit is not in the box, please contact our
customer service department in order to obtain another kit before using the
furniture.
Identify all the parts and hardware. Do not discard of the packaging until you
have checked that you have all of the parts and hardware required. Hardware
package may have spare parts.
WARNING: This item contains small parts which can be swallowed by
children and pets. Keep children and pets away during assembly. To avoid
danger of suffocation, always keep plastic bags away from children and pets.
We recommend that you assemble this unit on a carpeted floor to avoid
scratches. If using power tools, set the tool to low torque to avoid damage.
May require 2 people for ease of assembly.

4/21
CARE and MAINTENANCE
Perhaps the greatest environmental damage to wood furniture comes from wide swings in relative
humidity (RH) in our homes. Wood absorbs and desorbs water as relative humidity rises and falls,
and in doing so it swells and shrinks. Making matters worse, it expands and contracts unequally
along different grain directions. As humidity changes, the components of wooden objects are
continually pushing and pulling against each other. This pressure often results in parts of furniture
no longer fitting together closely or becoming distorted or breaking from their own internal
stresses.
The response to relative humidity changes begins with determining the annual average RH for
your particular space. Then try to keep the RH in the space where your furniture is as close to that
average as possible, generally within about 10% up or down. De-humidify in the summer and
humidify in the winter.
Be aware that raising the temperature lowers the humidity and vice versa. Thus, modern heating
systems, which can drive down interior RH in the winter, almost invariably cause problems for
furniture. To counteract their effect, you can either modify the RH by keeping furniture containing
spaces cooler in the winter or most importantly, have a good working humidifier for your home. A
humidistat automatically works to balance the humidity in your home so it is constant. Dry indoor
air can suck enough moisture from its surroundings to do permanent damage to wood, causing it
to crack or split.
Remember, that not all woods are created equal. Two factors that help determine how rapidly a
wood will lose moisture are pore size and surface hardness. A piece made from a dense and hard
wood will dry less rapidly than pieces made from softer woods.
Furniture that is sealed and lacquered will lose moisture more slowly than an unfinished piece
while pieces with veneer finishes are not only stronger, but lose moisture more slowly than other
finishes.
To help protect your wood furniture, take these steps:
• Use a humidifier, preferably one with an automatic control system that can sense the humidity
level and adjust itself accordingly. Don't over-humidify; that can damage wood by causing it to
expand and contract.
• Keep furniture out of direct sunlight, which can cause it to dry out, crack and warp.
• If you can avoid it, don't put furniture near heating vents. If you must, keep the piece 3 to 4
inches away from the wall, giving the heat and air space to circulate.
• Dust with soft dry cloth.
• Do not use liquid or aerosol products.
• To avoid marking, do not place rubber on surface (foot pads, etc.)
• For soil build-up, wipe with damp cloth & dry.
• Do not use abrasive cleaners.
IMPORTANT : Please read this manual carefully before beginning
assembly of this product. Keep this manual for future reference.

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
MODEL # 3AXCCOS72
PARTS DESCRIPTION
5/21
A
TOP
QTY 1
BL
LEFT SIDE
QTY 1
BR
RIGHT SIDE
QTY 1
C
BOTTOM SHELF
QTY 1
D
TOP SHELF
QTY 1
E
CENTRE SHELF
QTY 1
F
TOP DIVIDER
QTY 1
GL
LEFT MIDDLE DIVIDER
QTY 1
GR
RIGHT MIDDLE DIVIDER
QTY 1
Front /
Avant
Front / Avant
Front
/ Avant
Front / Avant
Front
/
Avant
Front /
Avant
Front /
Avant
Front
/ Avant

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
MODEL # 3AXCCOS72
PARTS DESCRIPTION
6/21
IR
RIGHT SHELF
QTY 1
J
LARGE DOOR (L&R Same)
QTY 2
K
SMALL DOOR (L&R Same)
QTY 2
LL
LEFT BACK PANEL
QTY 1
LR
RIGHT BACK PANEL
QTY 1
L1
TOP BACK PANEL
QTY 1
HL
LEFT DIVIDER
QTY 1
HR
RIGHT DIVIDER
QTY 1
IL
LEFT SHELF
QTY 1
Front
/ Avant
Front /
Avant

NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
PRE-ASSEMBLY INFORMATION
MODEL # 3AXCCOS72
PARTS DESCRIPTION
7/21
PL
LEFT DRAWER SIDE
QTY 1
PR
RIGHT DRAWER SIDE
QTY 1
Q
DRAWER BACK
QTY 1
R
DRAWER BOTTOM
QTY 1
L2
BOTTOM BACK PANEL
QTY 1
M
BOTTOM SUPPORT LEG
QTY 2
N
FLIP DOWN DOOR
QTY 1
O
DRAWER FRONT
QTY 1

PRE-ASSEMBLY INFORMATION
HARDWARE DESCRIPTION
NEED HELP? For help with assembly or if you are missing a part,
Please call customer service at 1-866-518-0120 ext. 262 (9 am to 4 pm EST)
8/21
MODEL # 3AXCCOS72
123
45 6
78 9
10
13
11 12
ALLEN KEY SCREW
M6 X 30 mm
QTY 34
CAM LOCK PIN
CAM LOCK
QTY 22 SETS
ALLEN KEY
QTY 1
HANDLE
M4 X 25 mm
QTY 6 SETS
PHILLIPS SCREW ROUND HEAD
M4 X 15 mm
QTY 41
HINGE
QTY 2
MAGNET AND PLATE
QTY 4 SETS
SHELF SUPPORT
QTY 12
PHILLIPS SCREW
M3 X 12 mm
QTY 28
PHILLIPS SCREW
M3 X 15 mm
QTY 16
PHILLIPS SCREW
M4 X 25 mm
QTY 8
WOOD DOWEL
Ø8 X 30 mm
QTY 22
LATCH
QTY 1 SET
Required -
Flathead screwdriver
Phillips screwdriver
Rubber mallet
Not Included
14 15
PHILLIPS SCREW
M3.5 X 15 mm
QTY 12
FURNITURE TIP OVER RESTRAINT
QTY 1 SET
a. M4 X 25 - QTY 2
( )1 is extra
b. M4 X 15 - QTY 1
c. M4 X 25 - QTY 1

COMPONENTS – KEY DIAGRAM MODEL # 3AXCCOS72
Q
RO
A
BL
L1 F
D
E
N
C
MM
BR
GR
GL
HL
HR
IL
IR
J
J
K
K
PL
PR
9/21
L2
LL
LR
F
ro
nt /
Av
ant
F
ro
nt / A
v
a
n
t
F
r
ont
/
A
va
nt
F
ro
n
t
/ A
va
nt
F
ro
n
t
/ A
va
n
t
F
ro
n
t / A
v
a
nt
Fro
nt
/ A
v
a
nt

ASSEMBLY
STEP 1
MODEL # 3AXCCOS72
1. Slide Drawer Bottom R firmly into slots on Drawer Sides PL , PR and
Drawer Front O .
STEP 2
1. Attach 4 Cam Lock Pins 2 to back of Drawer Front O .
2. Align Cam Lock Pins with pre-drilled holes and attach Drawer Sides PL , PR .
3. Insert 2 Cam Lock 2 into pre-drilled holes on each Drawer Side PL , PR .
4. Use flathead screwdriver to secure Cam Locks.
2
O
O
R
10/21
PL
PR
PL
PR

ASSEMBLY
STEP 3
MODEL # 3AXCCOS72
Q
R
O
STEP 4
4
1. Use Phillips Screwdriver to attach Handle 4 to Drawer Front O .
1
3
1. Align Drawer Back Q with Drawer Bottom R and press firmly into slot .
2. Attach back using 2 Allen Key Screws 1 through pre-drilled holes on each side.
3. Use Allen key 3 to tighten. Do not over tighten.
NOTE: The screwdriver is not
included in the hardware pack.
O
11/21
PL
PR

ASSEMBLY
12/21
MODEL # 3AXCCOS72
1. Insert 6 Dowels 12 into Centre Shelf E .
2. Use rubber mallet to tap Dowels 12 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Align Dowels 12 with pre-drilled holes and attach Middle Divider GL , GR .
STEP 6
1. Attach 6 Cam Lock Pins 2 to Top Shelf D .
2. Align Cam Lock Pins with pre-drilled holes and attach Middle Dividers GL , GR .
3. Insert 3 Cam Lock 2 into pre-drilled holes on each Middle Divider GL , GR .
4. Use flathead screwdriver secure Cam Lock.
5. Using 3 Allen Key Screws 1 attach Top Shelf D to Top Divider F .
STEP 5
12
E
E
D
F
1
3
2
GR
GL
GR
GL
Front
/
Avant
Front /
Avant
Front
/
Avant
Front
/
Avant
Front
/ Avant
Front
/ Avant
Front / Avant

ASSEMBLY
STEP 7
13/21
MODEL # 3AXCCOS72
1. Insert 2 Dowels 12 into each Divider HL , HR & GL , GR .
2. Use rubber mallet to tap Dowels 12 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Align Dowels 12 with pre-drilled holes and attach Bottom Shelf C .
4. Using 12 Allen Key Screws 1 attach Bottom Shelf C to Dividers HL , HR & GL , GR .
E
D
F
2
1. Attach 3 Cam Lock Pins 2 to each Divider HL , HR .
2. Align Cam Lock Pins pre-drilled holes and attach Top Shelf D .
3. Insert 6 Cam Lock 2 into pre-drilled holes on Top Shelf D .
4. Use flathead screwdriver secure Cam Lock.
STEP 8
C
12
1
3
GR
GL
GR
GL
HL
HR
HR
HL
Front
/ Avant
Front / Avant
Front
/ Avant
Front / Avant
Front
/
Avant
Front
/ Avant
Front /
Avant
Front / Avant
Front
/
Avant
Front / Avant
Front /
Avant
Front
/ Avant
Front / Avant

ASSEMBLY
STEP 9
14/21
MODEL # 3AXCCOS72
1. Insert 4 Dowels 12 into Bottom Shelf C .
2. Use rubber mallet to tap Dowels 12 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Attach 3 Cam Lock Pins 2 to each Side BL , BR .
4. Align Cam Lock Pins with pre-drilled holes and attach Bottom Shelf C .
5. Align pre-drilled holes on Sides B with Dowels 12 in Bottom Shelf C .
6. Insert 6 Cam Lock 2 into pre-drilled holes on Bottom Shelf C .
7. Use flathead screwdriver secure Cam Lock.
8. Using 8 Phillip Screws 11 attach 2 Bottom Support Legs M to Bottom Shelf C .
11
2
12
C
M
M
BL
BR
Front / Avant
Front
/ Avant
Front
/ Avant
Front /
Avant
Front / Avant
Front
/ Avant

ASSEMBLY
STEP 10
15/21
MODEL # 3AXCCOS72
1. Insert 2 Dowels 12 into top corners of each Side BL , BR .
2. Use rubber mallet to tap Dowels 12 into bottom of holes securely. 1/2 length of
Dowels should be exposed.
3. Align pre-drilled holes on bottom corners of Top A with Dowels 12 in Sides BL , BR .
4. Using 15 Allen Key Screws 1 attach Top A to Sides BL , BR , Dividers HL , HR & F .
1
3
12
1
3
C
A
BL
BR
GR
GL
HL
HR
F
Front
/ Avant
Front
/ Avant
Front
/ Avant
Front
/ Avant
Front / Avant
Front /
Avant

ASSEMBLY
STEP 11
16/21
MODEL # 3AXCCOS72
1. Attach Back Panels LL , LR , L1 , L2 to back of TV stand using Phillips Screws Round
Head 5 into pre-drilled guide holes.
2. Use Phillips screwdriver to tighten screws.
A
L2
5
L1
LR
LL
Front / Avant
Front
/
Avant

ASSEMBLY
STEP 12
17/21
MODEL # 3AXCCOS72
1. Attach hinges on Large Doors J and Sides BL , BR using Phillips Screw 9 .
2. Attach hinges on Small Doors K and Dividers HL , HR using Phillips Screw 9 .
3. Attach Hinges 6 to Flip Down Door N and Centre Shelf E using Phillips Screw 15 .
4. Attach Magnet Plates 7 to bottom corner of Doors J & K using Phillip
Screw 10 into guide holes on Doors J & K .
5. Attach Magnets 7 using Phillip Screws 10 into guide holes Bottom Shelf C .
6. Attach Latch 13 into hole on Top Shelf D and Flip Down Door N .
7. Use a Phillips screwdriver to attach Handles 4 into guide holes
Doors J & K .
A
D
N
E
10
7
15
6
9
13
9
9
13
4
GR
GL
BL
BR
HL
HR
K
K
J
J
Front / Avant
Front /
Avant

ASSEMBLY
STEP 13
18/21
MODEL # 3AXCCOS72
1. Use 4 Shelf Supports 8 for each shelf IL , IR in desired location.
2. 2 Shelf Supports 8 may be used on back top of each shelf IL , IR as a tipping restraint.
8
8
A
BL
IL
IR

19/21
STEP 14
14
14
NOTE: The screwdriver is not
included in the hardware pack.
WARNING
Serious or fatal crushing injuries can occur from furniture tip-over.
If the furniture tip over restraint kit is not in the box, please contact our customer
service department in order to obtain another kit before using the furniture.
FURNITURE TIP OVER RESTRAINT ASSEMBLY

20/21
1. Attach one of the mounting brackets securely to the back edge of
the furniture. Use the shorter screw.
2. Determine where furniture is to be placed and mark location on
the wall for mounting bracket screw hole approximately 2 inches
below the bracket mounted to the furniture.
3. Drill a 3/16 inch hole in the wall. Press the plastic anchor into the
hole and gently tap until the flange on the anchor is against the
wall surface.
4. Position the bracket over the anchor and use the longer screw to
securely attach the bracket to the wall.
5. Place the furniture so the back edge is in line with the bracket on
the wall.
6. Lace an end of the nylon zip-tie strap down through each bracket.
Bring both ends together and slide the smooth side upright
through the square-shaped end and pull through to create the
“locked” position.
7. Check to make sure the strap is securely laced and locked to the
brackets.
● DO NOT place heavy objects in top drawers
● DO NOT let children climb or hang on drawers, doors or shelves
Furniture Tip Over Restraint Instructions:
x
x
FURNITURE TIP OVER RESTRAINT ASSEMBLY