Simply Brands 5250 User manual

3-in-1 Volumising
Hot Brush
USER MANUAL
Model: 5250 SKU: SBA-00076
CAUTION:For your safety, please read
this user manual carefully and
thoroughly before using this product.
Please keep this manual somewhere
safe for future reference.
Cool Tip
Non-detachable
Brush head
Innovative
Airow Vents
Lightweight
Ergonomic
Design
Multiple Heat
Settings
Professional
Swivel Cord
•Product Name:
3-in-1 Volumising Hot Brush
•Product Model:
5250
• Charging Voltage/Current:
AC 220V–240V
•Frequency: • Power:
50-60Hz 1200W
3-in-1 Hot Brush Overview
Importer Name:
Simply Brands (Asia) Ltd
Importer Address:
Unit 04-05, 16th Floor, The Broadway No. 54-62
Lockhart Road, Wanchai, Hong Kong
Made in China

Hot Brush Features
This user manual provides safety instructions and
important tips for using and caring for your new
3-in-1 Volumising Hot Brush.
•Tourmaline technology emits negative ions for
healthier hair. The tourmaline even helps to seal
moisture into your hair and counteracts frizz.
•Ultra lightweight body that makes it easy to
carry when travelling.
•Quiet and powerful 1200 watt motor.
•60% faster drying time compared with other
blow dryer brushes.
•3 variable heated speed settings for total control.
It’s also fast to heat-up once you’ve switched it on.
•Ceramic coated brush head that helps protect
your hair with even heat distribution.
Safety Instructions
To correctly and safely use the hot brush, it is
very important that you follow the instructions
below thoroughly prior to use. Please save these
instructions for future reference.
• Brush Head/Bristle area will be very hot, DO NOT
TOUCH THIS AREA WHILE THE BRUSH IS ON.
•This appliance should never be left unattended
when it is plugged in. Close supervision is
necessary when appliance is used by or near
children or individuals with certain disabilities.
• Keep out of reach of children.
•Do not use the hot brush if any part is chipped or
cracked upon an initial visual inspection of it.
•Do not use the hot brush if it is defective or the
power cable is damaged. If the brush is not
working properly, please rst check the plug
and then check that the main electic supply is
actually switched on.
•NEVER use the hot brush in water or other liquids.
•NEVER use the hot brush near a bathtub, shower,
containers full of water, or any other damp place.
•NEVER use when your hands or feet are wet.
•NEVER reach for the hot brush if it has fallen into
water. Switch off the power supply at the main
socket, then unplug it.
•Do not use the hot brush near aerosol cans,
spray products or other toiletries.
• Always be careful not to burn yourself while
using it.
•Do not use the device for any other purpose than
its intended use.
• Do not use with a voltage converter.
•Before carrying out any cleaning or maintenance,
please be sure the hot brush is unplugged and
that it’s completely cooled down.
• The hot brush features an integrated UK plug. If
it’s unable to power on, please check the socket
button is switched on as well as the plug has been
properly plugged in.
•NEVER operate without the rear lter on.
•NEVER block the air opening of the hot brush or
place it near or on a soft surface which may block
its air openings.
•NEVER use the hot brush if it’s been left outdoors
or submerged in water.
• If the hot brush is equipped with attachments,
please allow these to cool if these have been
recently used prior to re-attaching or removing
attachments on/off the brush.
•No liability can be accepted for any damage
caused by non-compliance with these instructions
or any other improper use or mishandling.
Maintenance and Care
• Always unplug the hot brush and allow it to cool
if necessary prior to cleaning it.
• Periodically inspect the air intake/lter screen on
the back of the hot brush and remove any debris
that may have accumulated. Build up may
reduce air ow and damage the brush.
• Never use the following chemicals to clean the
hot brush: thinners, gasoline, types of alcohol
such as surgical spirit, or any other ammable
chemicals.
•DO NOT wrap the power cable around the hot
brush as this may cause the cable to wear out.
• Just use a soft, dry cloth to clean the hot brush.
Operating Guidelines
•Prior to plugging in, check the voltage on the
rating label to ensure it’s compatible with the
power socket’s voltage.
• Your hot brush is equipped with three heat
settings – Low, Middle and High. It’s also
equipped with a control switch. As a general
guide, use the high speed setting to effectively
dry thicker/very wet hair, and the middle setting
for ner/partly dry hair and also more precise
drying control when styling. The low setting can
be used towards the latter stages in styling your
hair on a less powerful mode.
• Section your hair and dry one area at a time.
Start at the back of your head when drying wet
hair and gradually work towards the front.
•DO NOT concentrate the airow on any one area
for an extended period of time to avoid causing
split ends and overly dry hair/scalp.
•BE CAUTIOUS: begin with the low setting rst to
test the right temperature for your scalp.
NOTE: during the rst few minutes of initial
rst use, you may notice smoke and a slight
odour from the hot brush. This is quite normal
and will quickly disappear.
Download the instructions
in other languages
Mode d’emploi en Français Instrucciones en Español
Instrukcja w języku polskim