Simply shade Bacara ssbspa User manual

SSBSPA

Instruction Manual

Bacara

Base

www.simplyshade.com

WARRANTY:

The manufacturer warrants that this

umbrella, when subject to normal and

proper use, will be free from

manufacturing defects for a period of

one year from the original date of

purchase. Should any defect occur

during the specified time period, the

manufacturer will repair, replace, or

provide replacement parts, at its own

option. Limited warranty against fabric

fading, based on fabric grade. Warranty

is not transferable.

We will not warrant any claim coverage

unless both the original sales receipt and

request form are sent to us. Any items

that are returned for warranty or non

warranty purposes must be issued a

Return Authorization Number. Only

upon issuance of an RA # and inspection

by our QC department will credit or

replacement of umbrella be issued. It is

the customer’s responsibility to pay the

freight on return products or

replacement parts. ALL RETURNED

ITEMS MUST INCLUDE THE RA#

CLEARLY WRITTEN ON THE

RETURN PACKAGE or package will be

refused by our warehouse personnel.

NOTE: Damages and failure caused by

improper use due to neglect of reasonable

and necessary care are not covered by

this warranty.

Additionally, acts of nature (including but

not limited to wind, hurricanes, tornadoes,

and storms) are not covered by this

warranty.

SAFETY PRECAUTIONS:

•To reduce risk of personal injury in which a person is injured or harmed, and/or

damage to personal property, read and follow the Assembly Guide prior to assembling

and operating umbrella and base.

•Close and store the umbrella in windy conditions or when a storm approaches. Never

allow the umbrella to flap in the wind; this could cause personal injury, damage to

personal property, damage to umbrella and/or umbrella canopy. Do not use tilting

function during windy conditions.

•Keep umbrella secured to umbrella base at all times.

•Do not leave open umbrella unattended. If damage occurs, this is not covered by the

warranty.

•When adjusting the umbrella, make sure that no person(s), item(s) or personal

property are close to the umbrella. This is important to prevent injury or material

damage.

•Do not allow children to play on or with umbrella or umbrella base.

•When adjusting or assembling the umbrella or umbrella base, make sure fingers, toes

or any other parts of the body are clear from moving parts. Failing to do so many result

in serious injury.

Steel

Wrench

Base

Stem

Channels

Thank you for your purchase of SimplyShade’s Bacara Base.

Please remove all contents from the package, inspect and review parts list.

CAUTION: To reduce personal injury and damage to your base or umbrella, read

and follow this instruction manual. Save information for future reference.

REQUIRED FOR ASSEMBLY:

•200 lbs. playground sand (not included).

NOTE: Do not put or allow sand into the center of the base shell.

IMPORTANT: Prior to assembly it is important to decide on the location of the umbrella.

•Allow ample height to avoid damage to your umbrella during assembly and usage.

•Choose a location that is level and sturdy.

•Avoid any sloping or soft ground cover.

•Consider a location that will maximize the umbrella’s rotating swivel function. Placing

the umbrella between two entertaining areas is ideal.

NOTE: Some parts may be included in the styrofoam packaging. DO NOT discard

any packaging or box until assembly is complete.

1 Base Shell 1

2 Base Lid 1

3 Steel Wrench 1

Inverted Base Stem 1

Inverted Plate 1

6 5mm Hexagon Wrench 1

Plate Bolts 4

8 Playground Sand (not included) 200 lbs.

PART LI ST

Part Description Qty.

Base Assembly

Select area to set base and place in desired location. NOTE: Moving the umbrella will

be difficult once fully assembled. Remove inverted plate from inverted base stem (Fig.

1). Remove the inverted base stem by using the steel wrench (provided) turning

counter-clockwise (Fig. 2), now remove base lid from base shell (Fig. 3).

Return inverted base stem to base shell, to keep sand out of base stem channels.

(Fig. 4) IMPORTANT: Do not allow sand to spill inside the base stem channels, as it

will impede further installation. Now, fill each section of the base shell with dry

playground sand (Fig. 5). Remove inverted base stem (Fig. 6) from base shell. Place

base lid back onto base shell and re-install the inverted base stem (Fig. 7).

IMPORTANT: Carefully, as you tighten the inverted base stem, you will notice

clicking/ratcheting sound. Please make sure it is between CLICKS. Do not over

tighten inverted base stem or parts may be damaged. Re-install the inverted plate

by tightening with 4 plate bolts with supplied 5mm hexagon wrench (Fig. 8 and 9).

Base is now ready for umbrella installation.

(Fig. 1) (Fig. 2) (Fig. 3)

(Fig. 4) (Fig. 5) (Fig. 6)

(Fig. 7) (Fig. 8) (Fig. 9)