VICTOR STANLEY FRAMERS MODERN Series User manual

FMS-324 FRAMERS MODERN™ SERIES
ASSEMBLY INSTRUCTIONS
CHECK ALL PARTS
• Be certain there are no missing parts.
• Be certain all required tools are available.
REQUIRED TOOLS
• 7/32-inch Hex Drive
• 2 stands/sawhorses
• 2 towels (or something soft) for the seat to rest on
to protect the fi nish
ASSISTANCE REQUIRED
• 3 people recommended to assemble product
• Necessary to handle, fi t and secure components
• Heavy lifting
WWW.VICTORSTANLEY.COM
Should you have any problems, please contact Victor Stanley, Inc.
READ ALL INSTRUCTIONS THOROUGHLY
BEFORE YOU BEGIN.
© Copyright 2006 Victor Stanley, Inc. All Rights Reserved
DELIVERY, STORAGE, and HANDLING
: Deliver products to site in manufacturer’s original,
unopened containers and packaging. Upon delivery,
examine packages immediately to ensure all products are
: Store products in a protected, dry area in
manufacturer’s unopened containers and packaging.
: Protect product’s fi nish from damage during
handling and installation
INSTALLATION
A. Clearance for 3/8-inch (9.53mm) anchor bolts (anchor bolts
not provided by Victor Stanley, Inc.)
B. Mounting: It is not recommended to locate anchor bolts until
bench is in place. This Victor Stanley, Inc. product must be
permanently affi xed to the ground. Consult your local codes
for regulations.
PROTECTION
A. Protect products prior to installation by having them remain in
the manufacturer’s packaging and container.
All specifi cations are subject to change. Contact manufacturer for details.
PAGE 1 OF 6
FMS-324
FRAMERS MODERN™ SERIES
ASSEMBLY INSTRUCTIONS
CHECK ALL PARTS
•
Be certain there are no missing parts.
Be certain there are no missing parts.
Be certain there are no missing parts.
Be certain there are no missing parts.
Be certain there are no missing parts.
•
Be certain all required tools are available.
Be certain all required tools are available.
Be certain all required tools are available.
Be certain all required tools are available.
Be certain all required tools are available.
Be certain all required tools are available.
REQUIRED TOOLS
REQUIRED TOOLS
REQUIRED TOOLS
•
7/32-inch Hex Drive
7/32-inch Hex Drive
7/32-inch Hex Drive
7/32-inch Hex Drive
•
•
2 stands/sawhorses
2 stands/sawhorses
2 stands/sawhorses
2 stands/sawhorses
2 stands/sawhorses
•
•
2 towels (or something soft) for the seat to rest on
2 towels (or something soft) for the seat to rest on
2 towels (or something soft) for the seat to rest on
2 towels (or something soft) for the seat to rest on
2 towels (or something soft) for the seat to rest on
2 towels (or something soft) for the seat to rest on
2 towels (or something soft) for the seat to rest on
2 towels (or something soft) for the seat to rest on
to protect the fi nish
to protect the fi nish
to protect the fi nish
to protect the fi nish
to protect the fi nish
ASSISTANCE REQUIRED
ASSISTANCE REQUIRED
ASSISTANCE REQUIRED
ASSISTANCE REQUIRED
ASSISTANCE REQUIRED
•
•
3 people recommended to assemble product
3 people recommended to assemble product
3 people recommended to assemble product
3 people recommended to assemble product
3 people recommended to assemble product
3 people recommended to assemble product
3 people recommended to assemble product
•
Necessary to handle, fi t and secure components
Necessary to handle, fi t and secure components
Necessary to handle, fi t and secure components
Necessary to handle, fi t and secure components
Necessary to handle, fi t and secure components
Necessary to handle, fi t and secure components
Necessary to handle, fi t and secure components
Necessary to handle, fi t and secure components
Necessary to handle, fi t and secure components
•
Heavy lifting
Heavy lifting
Heavy lifting
WWW.VICTORSTANLEY.COM
Should you have any problems, please contact Victor Stanley, Inc.
READ ALL INSTRUCTIONS THOROUGHLY
BEFORE YOU BEGIN.
© Copyright 2006
Victor Stanley, Inc.
All Rights Reserved
DELIVERY, STORAGE, and HANDLING
DELIVERY, STORAGE, and HANDLING
DELIVERY, STORAGE, and HANDLING
DELIVERY, STORAGE, and HANDLING
DELIVERY, STORAGE, and HANDLING
DELIVERY, STORAGE, and HANDLING
DELIVERY, STORAGE, and HANDLING
DELIVERY, STORAGE, and HANDLING
: Deliver products to site in
: Deliver products to site in
: Deliver products to site in
: Deliver products to site in
: Deliver products to site in
: Deliver products to site in
: Deliver products to site in
manufacturer’s
manufacturer’s
manufacturer’s
manufacturer’s
original, original,
original,
unopened containers and packaging. Upon delivery,
unopened containers and packaging. Upon delivery,
unopened containers and packaging. Upon delivery,
unopened containers and packaging. Upon delivery,
unopened containers and packaging. Upon delivery,
unopened containers and packaging. Upon delivery,
unopened containers and packaging. Upon delivery,
unopened containers and packaging. Upon delivery,
unopened containers and packaging. Upon delivery,
examine packages immediately to ensure all products are
examine packages immediately to ensure all products are
examine packages immediately to ensure all products are
examine packages immediately to ensure all products are
examine packages immediately to ensure all products are
examine packages immediately to ensure all products are
examine packages immediately to ensure all products are
examine packages immediately to ensure all products are
examine packages immediately to ensure all products are
examine packages immediately to ensure all products are
: Store products in a protected, dry
: Store products in a protected, dry
: Store products in a protected, dry
: Store products in a protected, dry
: Store products in a protected, dry
: Store products in a protected, dry
: Store products in a protected, dry
: Store products in a protected, dry
: Store products in a protected, dry
: Store products in a protected, dry
area in area in
manufacturer’s unopened containers and packaging.
manufacturer’s unopened containers and packaging.
manufacturer’s unopened containers and packaging.
manufacturer’s unopened containers and packaging.
manufacturer’s unopened containers and packaging.
manufacturer’s unopened containers and packaging.
manufacturer’s unopened containers and packaging.
manufacturer’s unopened containers and packaging.
manufacturer’s unopened containers and packaging.
manufacturer’s unopened containers and packaging.
: Protect product’s fi nish from damage
: Protect product’s fi nish from damage
: Protect product’s fi nish from damage
: Protect product’s fi nish from damage
: Protect product’s fi nish from damage
: Protect product’s fi nish from damage
: Protect product’s fi nish from damage
during
handling and installation
handling and installation
handling and installation
INSTALLATION
A. Clearance for 3/8-inch (9.53mm) anchor bolts (anchor
A. Clearance for 3/8-inch (9.53mm) anchor bolts (anchor
bolts
not provided by Victor Stanley, Inc.)
not provided by Victor Stanley, Inc.)
B.
Mounting
Mounting
: It is not recommended to locate anchor
: It is not recommended to locate anchor
bolts until
bench is in place. This Victor Stanley, Inc. product must be
bench is in place. This Victor Stanley, Inc. product must be
permanently affi xed to the ground. Consult your local codes
permanently affi xed to the ground. Consult your local codes
permanently affi xed to the ground. Consult your local codes
permanently affi xed to the ground. Consult your local codes
for regulations.
PROTECTION
A. Protect products prior to installation by having them
A. Protect products prior to installation by having them
A. Protect products prior to installation by having them
A. Protect products prior to installation by having them
A. Protect products prior to installation by having them
remain in
the manufacturer’s packaging and container.
the manufacturer’s packaging and container.
the manufacturer’s packaging and container.
the manufacturer’s packaging and container.
the manufacturer’s packaging and container.
the manufacturer’s packaging and container.
All specifi cations are subject to change. Contact manufacturer for details.
All specifi cations are subject to change. Contact manufacturer for details.
All specifi cations are subject to change. Contact manufacturer for details.
All specifi cations are subject to change. Contact manufacturer for details.
All specifi cations are subject to change. Contact manufacturer for details.
All specifi cations are subject to change. Contact manufacturer for details.
All specifi cations are subject to change. Contact manufacturer for details.
All specifi cations are subject to change. Contact manufacturer for details.
All specifi cations are subject to change. Contact manufacturer for details.
All specifi cations are subject to change. Contact manufacturer for details.
All specifi cations are subject to change. Contact manufacturer for details.
All specifi cations are subject to change. Contact manufacturer for details.
All specifi cations are subject to change. Contact manufacturer for details.
All specifi cations are subject to change. Contact manufacturer for details.
All specifi cations are subject to change. Contact manufacturer for details.
All specifi cations are subject to change. Contact manufacturer for details.
ref# 2006-118, revised 9-11-06
U.S. Patent D523,263; D526,805 S; EC Patent 503297; Other Patents Pending.

WWW.VICTORSTANLEY.COM
Should you have any problems, please contact Victor Stanley, Inc.
PARTS LIST
COMPONENTS HARDWARE
3/8-inch x 3/4-inch SS
BUTTON HEAD CAP SCREW 3/8-inch LOCK WASHER 3/8-inch SS FLAT WASHER
EXAMPLE
CONFIGURED FOR USE
CAST LEG FRAME CAST LEG FRAME BENCH SECTION
A B C
LS RS S
x8 x8 x8
x1 x1 x2
PAGE 2 OF 6
© Copyright 2006 Victor Stanley, Inc. All Rights Reserved
FMS-324 FRAMERS MODERN™ SERIES
ASSEMBLY INSTRUCTIONS
TOOLS REQUIRED
2 SAWHORSES
2 TOWELS
(or something soft to protect finish)
HANDS
*This symbolizes when to
use HAND to tighten.
7/32-inch HEX DRIVE
*This symbolizes when to
use TOOL to tighten.

WWW.VICTORSTANLEY.COM
STEP #1
FMS-324 FRAMERS MODERN™ SERIES
ASSEMBLY INSTRUCTIONS
PAGE 3 OF 6
© Copyright 2006 Victor Stanley, Inc. All Rights Reserved
#2
Set one bench section face down on sawhorse
using towels to protect finish.
Attach leg frames using 3 bolts tightened by hand. Leave leg frame on
one side angled out.
HAND TIGHTEN
1
2
3
PLACE TOWELS BETWEEN
BENCH AND SAWHORSE
TO PROTECT FINISH
1 2 3
Should you have any problems, please contact Victor Stanley, Inc.

WWW.VICTORSTANLEY.COM
STEP #3
FMS-324 FRAMERS MODERN™ SERIES
ASSEMBLY INSTRUCTIONS
PAGE 4 OF 6
© Copyright 2006 Victor Stanley, Inc. All Rights Reserved
#4
Attach second bench section.
Attach leg frames using 5 bolts tightened by hand.
1
2
3
4
5
HAND TIGHTEN
Should you have any problems, please contact Victor Stanley, Inc.

WWW.VICTORSTANLEY.COM
STEP #5
FMS-324 FRAMERS MODERN™ SERIES
ASSEMBLY INSTRUCTIONS
PAGE 5 OF 6
© Copyright 2006 Victor Stanley, Inc. All Rights Reserved
#6
Push leg frames in towards bench section.
Tighten all bolts now with tool.
Tighten only until lock washer is flat as shown below on right.
DO NOT OVER TIGHTEN.
#6
TOOL TIGHTEN
Lock washer when HAND tightened. Lock washer when TOOL tightened.
DO NOT OVER TIGHTEN.
Should you have any problems, please contact Victor Stanley, Inc.

WWW.VICTORSTANLEY.COM
FMS-324 FRAMERS MODERN™ SERIES
ASSEMBLY INSTRUCTIONS
PAGE 6 OF 6
© Copyright 2006 Victor Stanley, Inc. All Rights Reserved
FMS-324 FRAMERS MODERN™ SERIES
FINAL PRODUCT
Thank you for choosing Victor Stanley, Inc.
Should you have any problems, please contact Victor Stanley, Inc.