Simrad AP44 User manual

1. 1 x Display unit + Removable bezel
2. 1 x Micro-C Drop cable - 0.6 m (2’)
3. 1 x Micro-C T-Connector
4. 4 x Mounting screws
5. 1 x Suncover
6. Mounting template
7. Screw jig
AP44 / IS42 / Triton²
INSTALLATION GUIDE
Dimensions
Parts included
70.0 mm (2.75”)36.5 mm (1.43”)
48.5 mm (1.90”)*
118.0 mm (4.64”)
115.0 mm (4.53”)
28.5 mm (1.12”)
1
4
5
6
7
*AP44 only
3
2
AP44
AP44
IS42 / Triton²
IS42 / Triton²
For product manuals, technical specifications,
certificates and declarations,
refer to the product website:
www.simrad-yachting.com
www.bandg.com
*988-11229-001*

Mounting
System wiring example
Simrad B&G
2
1
1 NMEA 2000 Backbone
2 Micro-C Drop cable
3 Micro-C Power cable
4 Micro-C T-Joiners
5 Micro-C Terminator, 120 Ohm
6 Drive cable
T
T
12/24V DC
12V DC
AUTOPILOT
COMPASS
SPEED / DEPTH
SENSOR
DRIVE UNIT
RUDDER
FEEDBACK
6
5
4
3
AP44
AUTOPILOT
CONTROLLER
OP12
AUTOPILOT
CONTROLLER
Power
NMEA 2000 Backbone
Micro-C Drop cable
Rudder Drive cable
IS42
INSTRUMENT
DISPLAY
MASTHEAD
UNIT
GPS
SENSOR
2
1
1 NMEA 2000 Backbone
2 Micro-C Drop cable
3 Micro-C Power cable
4 Micro-C T-Joiners
5 Micro-C Terminator, 120 Ohm
6 Drive cable
T
T
12/24V DC
12V DC
AUTOPILOT
COMPASS
SPEED / DEPTH
SENSOR
GPS
SENSOR
DRIVE UNIT
RUDDER
FEEDBACK
6
5
4
3
Triton²
AUTOPILOT
CONTROLLER
Power
NMEA 2000 Backbone
Micro-C Drop cable
Rudder Drive cable
Triton²
INSTRUMENT
DISPLAY
MASTHEAD
UNIT
STEP 1 STEP 2 STEP 3 STEP 4 STEP 5
* Caution: Maximum driver head width
5.0 mm (0.19”)