Singer 27 Parts list manual

STITCH FUNCTION MANUAL
™™
™™
™

TABLE OF CONTENTS
I. Clothing Construction Functions
Button Sewing ............................................................ 6
Darning ....................................................................... 7
Staystitching ............................................................... 8
French Seam .............................................................. 8
Topstitching ................................................................ 9
Zipper Insertion ........................................................ 10
Piped (Corded) Edge/Welting ................................... 11
Flat Fell Seam .......................................................... 11
II. Decorative Functions
Satin Stitch Appliqué & Blindstitch Appliqué ............ 12
Shadow and Cutwork Appliqué ................................ 13
Thread Painting and Sketching ................................ 14
III. Heirloom Functions
Hemstitched Lace Insertion ...................................... 15
Traditional PinTucks ................................................. 16
IV. Home Décor Functions
Gathering ................................................................. 17
Free Hand Embroidery and Monogram .................... 18
Couching and Corded Satin Stitching ...................... 19
Interlocking Fell Seam .............................................. 20
V. Quilting Functions
Template, Motif and Stipple Quilting ........................ 21
Channel Quilting ....................................................... 22

CloClo
CloClo
Clothing Construction Fthing Construction F
thing Construction Fthing Construction F
thing Construction Functionsunctions
unctionsunctions
unctions
ButtButt
ButtButt
Button Seon Se
on Seon Se
on Sewingwing
wingwing
wing
MacMac
MacMac
Machine Preparation:hine Preparation:
hine Preparation:hine Preparation:
hine Preparation:
•Lower Feed Dogs
•To begin, set machine to Straight Stitch
•Presser Foot: Standard Zigzag
or optionaloptional
optionaloptional
optional Button foot (part #179911-P)
SeSe
SeSe
Sewing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
Insert fabric under presser foot. Insert button under foot making sure to
align button opening with foot opening. Align needle with the opening (hole)
on left side of button. Sew 3 or 4 stitches to secure thread end. Select
Zigzag stitch. Set stitch width so that needle clears both button openings
(holes) when moving from left to right (always test the width by turning your
handwheel manually before sewing). Sew 4 to 5 Zigzag stitches. Select
Straight stitch. Make sure the needle is aligned with the left button opening
(hole). Sew 3 to 4 stitches to secure thread end.
6666

DarningDarning
DarningDarning
Darning
MacMac
MacMac
Machine Preparationhine Preparation
hine Preparationhine Preparation
hine Preparation:
•Pattern: Straight Stitch
•Stitch Width: Straight
•Stitch Length: Pre-Programmed
•Foot: Embroidery foot supplied with embroidery unit.
(DO NO(DO NO
(DO NO(DO NO
(DO NOT AT A
T AT A
T ATTTT
TTTT
TTAA
AA
ACH EMBRCH EMBR
CH EMBRCH EMBR
CH EMBROIDEROIDER
OIDEROIDER
OIDERY UNIT)Y UNIT)
Y UNIT)Y UNIT)
Y UNIT)
•Drop Feed: Lower feed dogs
SeSe
SeSe
Sewing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
Hoop the section of clothing requiring darning in the hoop supplied with the
embroidery unit. (DO NO(DO NO
(DO NO(DO NO
(DO NOT AT A
T AT A
T ATTTT
TTTT
TTAA
AA
ACH THE EMBRCH THE EMBR
CH THE EMBRCH THE EMBR
CH THE EMBROIDEROIDER
OIDEROIDER
OIDERY UNIT)Y UNIT)
Y UNIT)Y UNIT)
Y UNIT) Reinforce the hole
or tear by basting a matching or similar piece of fabric to the underside of the
tear. Slip the embroidery hoop under the presser foot (do not forget to lower
presser foot) and begin manually feeding the hoop forward and backwards until
the hole or tear is completely covered in stitches. Turn the hoop so that the
stitching now appears horizontal and repeat the forward and backward
movement over the first rows of stitching.
77
77
7

FF
FF
Frencrenc
rencrenc
rench Seam:h Seam:
h Seam:h Seam:
h Seam:
MacMac
MacMac
Machine Preparation:hine Preparation:
hine Preparation:hine Preparation:
hine Preparation:
•Pattern: Straight Stitch
•Stitch Width: Straight
•Stitch Length: 2 – 3
•Foot: Standard Zigzag or optionaloptional
optionaloptional
optional
Zipper foot (part #006905008)
SeSe
SeSe
Sewing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
Align top and bottom fabric, undersides
together. Stitch at 1/4 of an inch from the
edge. Press seam open and then fold in
topsides together, with stitching line exactly
on fold. Press flat. Stitch 3/8 of an inch
from the fold.
SS
SS
Stata
tata
taystitcystitc
ystitcystitc
ystitchinghing
hinghing
hing
MacMac
MacMac
Machine Preparation:hine Preparation:
hine Preparation:hine Preparation:
hine Preparation:
•Pattern: Straight Stitch
•Stitch Width: Straight
•Stitch length: 1.5mm (fine)
•Foot: Standard Zigzag foot
SeSe
SeSe
Sewing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
Staystitching is used to reinforce curves such as
armholes, seams in stretch fabrics and other areas
to prevent stretching. Stay stitch along the edge of
the area 1/4 inch from the edge of the seam.
88
88
8

TT
TT
Topstitcopstitc
opstitcopstitc
opstitchinghing
hinghing
hing
MacMac
MacMac
Machine Preparation:hine Preparation:
hine Preparation:hine Preparation:
hine Preparation:
•Pattern: Straight Stitch
•Needle Position: Center
•Stitch Width: Straight
•Stitch Length: Variable
•Foot: Standard Zigzag or optionaloptional
optionaloptional
optional
Zipper foot (part #006905008)
SeSe
SeSe
Sewing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
This function is used to embellish a variety of
projects. Sew 1/4 of an inch from the edge of
your garment or seam to topstitch.
99
99
9

Zipper InserZipper Inser
Zipper InserZipper Inser
Zipper Insertiontion
tiontion
tion
MacMac
MacMac
Machine Preparation:hine Preparation:
hine Preparation:hine Preparation:
hine Preparation:
•Pattern: Straight Stitch
•Stitch Width: Straight
•Stitch length: Pre-Programmed
•Foot: OptionalOptional
OptionalOptional
Optional Zipper foot (part #006905008)
SeSe
SeSe
Sewing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
Machine baste (longest stitch length) seam at
5/8 of an inch. Press seam open and spread
garment flat wrong side up. Place zipper face
down on seam with coils directly on the seamline.
Hand baste zipper into place. Using zipper foot,
topstitch zipper from the right side beginning at
the bottom of zipper and working your way to the top.
Stitch up left side and then right side. For perfect
stitching, use 3/4 inch wide tape and tape it down the
center of the seam. You can use the tape as a
sewing guide.
1010
1010
10

Piped (Corded) Edge / WPiped (Corded) Edge / W
Piped (Corded) Edge / WPiped (Corded) Edge / W
Piped (Corded) Edge / Weltingelting
eltingelting
elting
MacMac
MacMac
Machine Preparation:hine Preparation:
hine Preparation:hine Preparation:
hine Preparation:
•Pattern: Straight Stitching
•Stitch Width: For straight stitching
•Stitch Length: 2 – 3
•Foot: OptionalOptional
OptionalOptional
Optional Zipper foot (part #006905008)
SeSe
SeSe
Sewing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
Use store bought piping or cording or cover cord with a
bias strip of fabric to make your own. Hand or machine
baste piped edge between 2 layers of fabric so that all
raw edges are aligned. Attach zipper foot to shank so
that needle passes through the opening on left side of
foot. Sew guiding the Zipper foot along the edge of the
piping.
Flat FFlat F
Flat FFlat F
Flat Fell Seamell Seam
ell Seamell Seam
ell Seam
MacMac
MacMac
Machine Preparation:hine Preparation:
hine Preparation:hine Preparation:
hine Preparation:
•Pattern: Straight Stitch
•Stitch Width: Straight
•Stitch length: Pre-Programmed
•Foot: Standard Zigzag or optionaloptional
optionaloptional
optional
Zipper foot (part #006905008)
SeSe
SeSe
Sewing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
Baste fabric wrong sides together at
seamline. Stitch at 5/8 of an inch from the
edge. Press the seam allowances to one side
of the seam, and trim away the lower seam
allowance to 1/8 of an inch. Turn in top
seam allowance 1/4 of an inch (to edge of
stitching) and press. Baste seam allowance to
garment, concealing the trimmed lower
seam. Stitch along the edge of the fold.
1111
1111
11

DecorativDecorativ
DecorativDecorativ
Decorative Fe F
e Fe F
e Functionsunctions
unctionsunctions
unctions
Satin SSatin S
Satin SSatin S
Satin Stitctitc
titctitc
titch Appliqué &h Appliqué &
h Appliqué &h Appliqué &
h Appliqué &
BlindstitcBlindstitc
BlindstitcBlindstitc
Blindstitch Appliquéh Appliqué
h Appliquéh Appliqué
h Appliqué
•Pattern: Zigzag or Blindhem
•Stitch Width: 1.5 (1/16 of an inch)
•Stitch Length: 0.5 – 1.5 for Zigzag,
2 – 3 for Blindhem
•Foot: Standard Zigzag or
optionaloptional
optionaloptional
optional Blindhem foot (part #010400)
SeSe
SeSe
Sewing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
Position appliqué piece on background fabric and
secure it in place using fabric glue. Align needle
so that it pierces background fabric along the
outside edge of the appliqué. Lower presser foot.
For Satin SSatin S
Satin SSatin S
Satin Stitctitc
titctitc
titch Appliquéh Appliqué
h Appliquéh Appliqué
h Appliqué, use Zigzag stitch and
proceed to sew following the edge of the
appliqué.
For BlindstitcBlindstitc
BlindstitcBlindstitc
Blindstitch Appliquéh Appliqué
h Appliquéh Appliqué
h Appliqué use Blindhem stitch and
proceed to sew following the edge of your
appliqué.
If using a Blindhem foot, align the lip of the blind
hem foot guide so that it sits directly under the
edge of the appliqué. You may need to adjust the
position of the guide to bring it closer or further
from the edge of the appliqué, by using the
thumbscrew located at the right of the foot.
To pivot for curves or corners, leave needle down
in fabric on outside edge of appliqué, lift foot and
pivot.
Satin SSatin S
Satin SSatin S
Satin Stitctitc
titctitc
titchh
hh
h
BlindstitcBlindstitc
BlindstitcBlindstitc
Blindstitchh
hh
h
1212
1212
12

ShadoShado
ShadoShado
Shadow and Cutww and Cutw
w and Cutww and Cutw
w and Cutworor
oror
ork Appliquék Appliqué
k Appliquék Appliqué
k Appliqué
MacMac
MacMac
Machine Preparation:hine Preparation:
hine Preparation:hine Preparation:
hine Preparation:
•Pattern: Blanket Stitch # 13 reversed for Shadow and
Zigzag for Cutwork
•Stitch Width: 2.0 or desired width
•Stitch Length: Preprogrammed for blanket, 0.5 to 1.5 for Zigzag
•Foot: Standard Zigzag or optionaloptional
optionaloptional
optional Blindhem foot (part #010400)
SeSe
SeSe
Sewing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
ShadoShado
ShadoShado
Shadow appliquéw appliqué
w appliquéw appliqué
w appliqué is where a lightweight colored fabric is layered under a sheer or transparent
fabric. Position colored fabric larger than the design area on the underside of the transparent
fabric and secure it in place using a basting stitch or fabric glue. Using a marking pencil trace
placement of the appliqué on the right side of the transparent fabric. Stitch along design lines
using the blanket stitch so that when the needle swings to the right it sews on the design line
and when it swings to the left it sews within the design area. When design is complete, trim
excess colored appliqué fabric on the underside close to the stitching.
For CutwCutw
CutwCutw
Cutworor
oror
ork appliquék appliqué
k appliquék appliqué
k appliqué, 2 layers of sheer fabric are stitched together, and the top layer of fabric
is trimmed away from the right side to create a sheer opening. Position sheer fabric larger
than the design area on the underside of the transparent fabric and secure it in place using a
basting stitch or fabric glue. Using a marking pencil trace placement of the appliqué on the
right side of the top layer of sheer fabric. Stitch along design lines using a straight stitch.
When straight stitching is completed, trim the top layer of fabric close to the stitching within
the design area.
Once trimming is completed, set machine to Zigzag stitch and sew along design lines so that
when the needle swings to the right it sews on the design line and when it swings to the left it
sews within the design area. When design is complete, trim excess appliqué fabric on the
underside close to the stitching. To pivot for curves or corners, leave needle down in fabric on
outside edge of appliqué, lift foot and pivot.
ShadoShado
ShadoShado
Shadoww
ww
w CutwCutw
CutwCutw
Cutworor
oror
orkk
kk
k
1313
1313
13

MacMac
MacMac
Machine Preparation:hine Preparation:
hine Preparation:hine Preparation:
hine Preparation:
•Pattern: Straight Stitch and Zigzag
Stitch
•Stitch Width: Straight and desired
width for zigzag
•Stitch Length: Pre-Programmed
•Foot: Embroidery foot supplied with
embroidery unit.
(DO NO(DO NO
(DO NO(DO NO
(DO NOT AT A
T AT A
T ATTTT
TTTT
TTAA
AA
ACH EMBRCH EMBR
CH EMBRCH EMBR
CH EMBROIDEROIDER
OIDEROIDER
OIDERY UNIT)Y UNIT)
Y UNIT)Y UNIT)
Y UNIT)
•Drop Feed: Lower feed dogs
SeSe
SeSe
Sewing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
Stencil or draw your pattern onto the right
side of your fabric. Hoop your fabric into the
hoop supplied with the embroidery unit, and
slip it under the embroidery foot.
(Do no(Do no
(Do no(Do no
(Do not attact attac
t attact attac
t attach the embrh the embr
h the embrh the embr
h the embroideroider
oideroider
oidery unit ty unit t
y unit ty unit t
y unit to theo the
o theo the
o the
macmac
macmac
machine)hine)
hine)hine)
hine)
For Thread SkThread Sk
Thread SkThread Sk
Thread Skee
ee
etctc
tctc
tchinghing
hinghing
hing, set your machine for
Straight stitch, and stitch as if your needle is
your pencil. Follow the design that you have
traced onto your fabric, by moving the hoop
manually.
For Thread PThread P
Thread PThread P
Thread Paintingainting
aintingainting
ainting (fill-in stitches), set your
machine to Zigzag stitch at the width desired
and begin to fill in the design area by moving
the hoop manually. To create shading in your
design, change the thread color frequently,
leaving a jagged edge for blending in the next
color. To secure thread ends when changing
colors, set stitch width to 0 and stitch in place
a few times.
Thread PThread P
Thread PThread P
Thread Painting and Skainting and Sk
ainting and Skainting and Sk
ainting and Skee
ee
etctc
tctc
tchinghing
hinghing
hing PP
PP
Paintingainting
aintingainting
ainting
SkSk
SkSk
Skee
ee
etctc
tctc
tchinghing
hinghing
hing
1414
1414
14

Heirloom FHeirloom F
Heirloom FHeirloom F
Heirloom Functionsunctions
unctionsunctions
unctions
HemstitcHemstitc
HemstitcHemstitc
Hemstitched Lace Inserhed Lace Inser
hed Lace Inserhed Lace Inser
hed Lace Insertiontion
tiontion
tion
MacMac
MacMac
Machine Preparation:hine Preparation:
hine Preparation:hine Preparation:
hine Preparation:
•Pattern: Straight Stitch and Hemstitching Pattern #14
•Stitch Width: Preprogrammed
•Stitch Length: Preprogrammed
•Foot: Standard Zigzag or optionaloptional
optionaloptional
optional
Satin foot (part #006172008-P)
SeSe
SeSe
Sewing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
Using a marking pencil, draw a placement line for the lace along the edge of your
garment. Baste or pin the lace along this placement line on the right side of the
fabric. Straight stitch along each edge of the lace, as close to the edge as
possible. Cut down the centre of the fabric under the lace, taking care not to cut
the lace. Press fabric edge on each side away from the lace. Set machine to
hemstitching and stitch along the fabric edge on each side of the lace on the right
side of the fabric. Trim excess fabric close to stitching on wrong side of fabric.
1515
1515
15

TT
TT
Traditional PinTraditional PinT
raditional PinTraditional PinT
raditional PinTucuc
ucuc
ucksks
ksks
ks
MacMac
MacMac
Machine Preparation:hine Preparation:
hine Preparation:hine Preparation:
hine Preparation:
•Pattern: Straight
•Stitch Width: Straight
•Stitch Length: 2 – 3
•Foot: Standard Zigzag or optionaloptional
optionaloptional
optional Zipper foot (part #006905008)
SeSe
SeSe
Sewing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
To mark pintucks in your fabric, either pull a thread to mark the fold or
mark with chalk or marking pencil. Fold and press wrong sides together
on pulled thread line or marked lines. Stitch 1/8 of an inch from fold
line. Repeat, sewing in the same direction for each tuck. Press flat.
1616
1616
16

Home Decor FHome Decor F
Home Decor FHome Decor F
Home Decor Functionsunctions
unctionsunctions
unctions
GatheringGathering
GatheringGathering
Gathering
MacMac
MacMac
Machine Preparation:hine Preparation:
hine Preparation:hine Preparation:
hine Preparation:
•Pattern: Straight Stitch
•Stitch Width: Straight
•Stitch Length: Longest
•Foot: Standard Zigzag
Use this technique for gathering waistbands, sleeve caps etc. At 1/4 of an inch
from the edge of the seam, begin by backstitching and then continue to sew the
length required. When seam is complete, raise the needle to it’s highest, raise
the presser foot and pull the upper and lower threads to the back of the foot. Cut
your thread ends leaving a minimum 6 inches of thread. Repeat this procedure
once again at 1/4 of an inch from your first row of stitching. Once the two rows
are completed, draw in your fabric the required amount by pulling on the bobbin
thread. Secure thread ends.
SeSe
SeSe
Sewing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
1717
1717
17

MacMac
MacMac
Machine Preparation:hine Preparation:
hine Preparation:hine Preparation:
hine Preparation:
•Pattern: Zigzag Stitch
•Stitch Width: Desired width for zigzag
•Stitch Length: Pre-Programmed
•Foot: Embroidery foot supplied with embroidery unit
(DO NO(DO NO
(DO NO(DO NO
(DO NOT AT A
T AT A
T ATTTT
TTTT
TTAA
AA
ACH EMBRCH EMBR
CH EMBRCH EMBR
CH EMBROIDEROIDER
OIDEROIDER
OIDERY UNIT)Y UNIT)
Y UNIT)Y UNIT)
Y UNIT)
•Drop Feed: Lower Feed dogs
SeSe
SeSe
Sewing Instructionswing Instructions
wing Instructionswing Instructions
wing Instructions:
Stencil or draw your pattern or monogram onto the right side of your fabric.
Hoop your fabric into the hoop supplied with the embroidery unit, and slip it
under the Embroidery foot. (Do no(Do no
(Do no(Do no
(Do not attact attac
t attact attac
t attach the embrh the embr
h the embrh the embr
h the embroideroider
oideroider
oidery unit ty unit t
y unit ty unit t
y unit to the maco the mac
o the maco the mac
o the machine)hine)
hine)hine)
hine)
Set your machine to Zigzag stitch at the width desired and begin to fill in the design
area by moving the hoop manually. To secure thread ends, set stitch width to “0”
and stitch in place a few times. Hand movement will control the quality and the
look of your stitching.
FF
FF
Free Hand Embrree Hand Embr
ree Hand Embrree Hand Embr
ree Hand Embroideroider
oideroider
oidery and Monogramy and Monogram
y and Monogramy and Monogram
y and Monogram
1818
1818
18

CoucCouc
CoucCouc
Couching and Corded Satinhing and Corded Satin
hing and Corded Satinhing and Corded Satin
hing and Corded Satin
SS
SS
Stitctitc
titctitc
titchinghing
hinghing
hing
MacMac
MacMac
Machine Preparation:hine Preparation:
hine Preparation:hine Preparation:
hine Preparation:
•Pattern: Zigzag
•Stitch width: Variable (Set
according to width of cord)
•Stitch length: Variable
•Foot: Zigzag or optionaloptional
optionaloptional
optional
Satin foot (part #006172008-P)
SeSe
SeSe
Sewing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
Couching and Corded Satin Stitching is
simply the technique of zigzagging over
a fine cord. Use as a decorative touch
on jackets and other sewing projects.
With a marking pencil, draw a design
on your fabric. Lay the cord under the
center opening of your foot and zigzag
over the cord so that the needle falls
just to the right and left of the
decorative cord. As you sew, follow the
lines of your design. For couching, set
the stitch length at the pre-programmed
length and for corded satin set the
stitch length shorter for a satin effect.
1919
1919
19

MacMac
MacMac
Machine Preparation:hine Preparation:
hine Preparation:hine Preparation:
hine Preparation:
•Pattern: Straight Stitch
•Stitch Width: Straight
•Stitch length: Pre-Programmed
•Foot: Standard Zigzag or
optionaloptional
optionaloptional
optional Zipper foot (part #006905008)
SeSe
SeSe
Sewing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
Baste fabric right sides together with edge of top layer 1/2 inch from the edge of the
bottom layer. Stitch at 3/4 of an inch from the edge of the bottom layer. Fold the
bottom layer of seam allowance, so that it meets top layer (approx 1/4 of an inch).
Press. Fold and press bottom layer again so that it now meets the stitching line.
Edgestitch close to the fold. Press seam to one side.
IntInt
IntInt
Interlocerloc
erlocerloc
erlocking Fking F
king Fking F
king Fell Seamell Seam
ell Seamell Seam
ell Seam
2020
2020
20

TT
TT
Templatemplat
emplatemplat
emplate, Moe, Mo
e, Moe, Mo
e, Motif and Stif and S
tif and Stif and S
tif and Stippletipple
tippletipple
tipple
QuiltingQuilting
QuiltingQuilting
Quilting
MacMac
MacMac
Machine Preparation:hine Preparation:
hine Preparation:hine Preparation:
hine Preparation:
•Pattern: Straight Stitch
•Needle Position: Center
•Stitch Width: Straight
•Stitch Length: 2 - 3
•Foot: Use embroidery foot supplied
with the embroidery unit.
(DO NO(DO NO
(DO NO(DO NO
(DO NOT AT A
T AT A
T ATTTT
TTTT
TTAA
AA
ACH EMBRCH EMBR
CH EMBRCH EMBR
CH EMBROIDEROIDER
OIDEROIDER
OIDERY UNIT)Y UNIT)
Y UNIT)Y UNIT)
Y UNIT)
•Drop Feed: Drop feed dogs.
Before you begin to sew, you must hoop the
fabric (all layers) in one of the hoops that
was supplied with the embroidery unit. The
hoop will not be attached to the embroidery
unit, rather you will feed it manually under
the embroidery foot.
SeSe
SeSe
Sewing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
For template quilting transfer a design from
a template (plastic stencil) to your fabric
and then stitch following the outline. Motif
quilting is used to emphasize the printed
design of a fabric and is accomplished by
outlining the desired motif. Stippling is free
motion quilting where you hoop the fabric
and guide it by hand, allowing you to stitch
in any direction. All of the above techniques
are used to hold the layers of the quilt
together.
Quilting FQuilting F
Quilting FQuilting F
Quilting Functionsunctions
unctionsunctions
unctions
TT
TT
Templatemplat
emplatemplat
emplatee
ee
e
MoMo
MoMo
Motiftif
tiftif
tif
SS
SS
Stipplingtippling
tipplingtippling
tippling
2121
2121
21

Channel QuiltingChannel Quilting
Channel QuiltingChannel Quilting
Channel Quilting
MacMac
MacMac
Machine Preparation:hine Preparation:
hine Preparation:hine Preparation:
hine Preparation:
•Pattern: Straight Stitch
•Needle Position: Center
•Stitch Width: Straight
•Stitch Length: 2 - 3
•Foot: Use Zigzag or General Purpose Foot
You may also use the optionaloptional
optionaloptional
optional
Even Feed foot (part #423242451-P)
SeSe
SeSe
Sewing Instructions:wing Instructions:
wing Instructions:wing Instructions:
wing Instructions:
For channel quilting, simply sew several long parallel lines
of straight stitching through all layers of the quilt. These
lines can be sewn diagonally, horizontally or vertically.
2222
2222
22