Singer SEWHANDY MODEL 40K User manual

Sewhandy model 40k
INSTRUCTION MANUAL
Table of Contents | Back to Manual Index | Download Manual in PDF Format | Next Page

Sewhandy model 40k
The Right Tension
The Seam Guide
To Change Needle
To Oil your Machine
Table of Contents
Main Parts
To Thread your Machine
To Sew a Fine Seam
To End Stitching in Fabric
Main Parts
Previous Page | Table of Contents | Back to Manual Index | Download Manual in PDF Format |
Next Page

Sewhandy model 40k
to Change Needle
When your needle becomes blunt
or bent, change it right away. Use
a small screwdriver, if necessary,
to loosen and tighten the screw.
Insert the new needle with the flat
side toward the left.
Before you begin, be sure that the
needle bar is up and the presser
foot in down.
10
Previous Page | Table of Contents | Back to Manual Index | Download Manual in PDF Format |
Next Page

Sewhandy model 40k
the Seam Guide
This attachment will help you guide
the fabric. You will use it to make
straight seams and tucks and for
placing stitching evenly around
curved edges.
9
Previous Page | Table of Contents | Back to Manual Index | Download Manual in PDF Format |
Next Page

Sewhandy model 40k
the Right Tension
A perfect seam is strong, flat and
smooth. To make a perfect seam
the tension on your thread must be
just right. Tension is adjusted by
turning the tension thumb nut.
If your stitching looks like this,
make it tighter by turning the
tension thumb nut to the right.
If your stitching looks like this,
make it looser by turning the
tension thumb nut to the left.
When your seam looks like this,
the tension is just right.
8

Previous Page | Table of Contents | Back to Manual Index | Download Manual in PDF Format |
Next Page

Sewhandy model 40k
To End Stitching in Fabric
continued...
Pass the scissors under the
presser foot and pull thread loop to
the left as far as it will go.
Hold end of thread loop and cut
thread close to end of stitching.
7
Previous Page | Table of Contents | Back to Manual Index | Download Manual in PDF Format |
Next Page

Sewhandy model 40k
To End Stitching in Fabric
Sometimes you may need to end
your stitching in the fabric. It is a
good idea to finish tucks, pleats,
hems and circles of stitching this
way.
Turn the hand wheel until the
needle is as high as it will go.
Raise the presser foot.
6
Previous Page | Table of Contents | Back to Manual Index | Download Manual in PDF Format |
Next Page

Sewhandy model 40k
To start your next seam, hold the
fabric edge against the front of the
presser foot and turn the hand
wheel. The fabric will "feed" under
the foot and you are on your way.
To Sew a Fine Seam continued...
An easy way to end a seam is to
stitch right off the edge of the
fabric. Make a little chain about
one inch long. Cut in the middle.
5
Previous Page | Table of Contents | Back to Manual Index | Download Manual in PDF Format |
Next Page

Sewhandy model 40k
to Sew a Fine Seam
A plain seam is made by stitching
two fabric edges together A seam
must be started stitched and ended
just so to be perfect This is how to
do it.
Place the fabric under the presser
foot. Lower the foot. Turn the hand
wheel with your right hand, and
use your left hand to guide the
fabric.
4
Previous Page | Table of Contents | Back to Manual Index | Download Manual in PDF Format |
Next Page