Sioux Tools 5300A User manual

Form # ZCE705
Date 5-02/A
Operator Instructions
Indudes - Foreseen Use, Work Stations, Putting Into Service,
Operating, Dismantling, Assembly and Safety Rules.
Manufacturer/Supplier
Sioux Tools, Inc.
250 Snap-on Drive
P.O. Box 1596
Murphy, NC 28906
U.S. A.
Tel No. 828-835-9765 Fax No. 828-835-9685
Air Pressure
Product Net Weight
1.75 lbs
0.80 kg
RecornrnendedWorking 6.2
bar 90 PSI
Maximum 6.2 bar 90 PSI
Recommended Use Of
Balancer Or Support
NO
SAFETY MESSAGES 1 A WARNING
Personal Safety Equipment
Use - Safety Glasses
Use - Safety Gloves
defects and other reproductive harm.
-Use only compressed air at the
recommended conditions.
Ifthe tool appears
to malfunction.
remove from use immediately and
arrange for service and repair. If itis
not practical to
remove tool from
service, then shut off the air supply
to the tool and write or have written a
warning note and attach itto the tool.
- If tool is to be used with abalancer or
other suspensiondevice, ensure that
Use - Safety Boots
Use - Breathing Masks
use- ~ar Protectm YES
Important
Read these instructions carefully before installing, operating,
servicing or repairing this toot. Keep these instructions in a sate
accessible place.
@ ear baring Protection
Avoid Prolonged Exposure
&, Tovhtw
Safety rules when using a 5300A Air
Saw
- Prolongedexposuretovibration may cause injury.
-Keep
the work guide (guard) in place and in working
order and
make sure it is firmly fixed.
-Always make sure the blade is tightly fixed. Do not use
improper blades. Never use Hades that are oversized. Do
not modifyother types and sizes of blades to fit the tool.
-Read all instructions before using this tool. All
operators
must be fully trained in its use and aware of
these safety rules.
-Do not exceed the maximumworking air pressure.
- Use personalprotection equipment as recommended.
- Some dust created by power sanding, sawing, grinding,
drilling, and other construction
activities contains
chemicals known to cause cancer, birth ,
Model NoINos
5300A
Product Type
High Speed Air Saw
Serial No.
Max BPM
11,000
Noise Level: Sound Pressure Level 82.0 dB(A)
Sound Power Level 94.0 dB(A)
Recommended Hose Bore
Size - Minimum
5/16 ins 8 mrn
Test Method: Tested in accordance with Pneurop
test code PN8rn'C-l and !SO Standard 3744
Recommended Max.
Hose Length
30Ft 10M
Vibration Level 10.1 Meters / Sec2
Test Method: Tested in accordance with IS0
standards 8662 Part 1 & 12
suspension/supportdevice.
-When operating
the tool, always keep the body and
particularly
the hands away from the working attach-
ment fixed to the tool.
-The toolis
not electrically insulated.Never use thetool
if there is
any chance of coming into contact with live
electricity.
- Always when usingthe tool. adopt a firm footing and/or
position and grip the tool sufficiently only toovercome
any reaction forces that may result from the tool doing
work.
Do not ove&rip.
-Use only correct spare parts for maintenance and
repair.
Do not improvise or make temporary repairs.
Majorservicing and repairs
shouid only be carriedout
by personstrained to do so-
Take Air From Top
All Pipe And Fitinas
Should Be l/a- Or Larger
LOTI SpO! To
Compressor Trap Water
with Sufficient Capacity
the tool is firmly attached to the 1 Recommended Air Supply System
Figure 1
Page No 1