SIRUI DK18 User manual

DK18碳纤维气垫灯架
如图：
1. 拔出拉钮并旋转，使定位块离开孔位。
2. 展开脚管到对应的孔位。
3. 旋转拉钮使定位块卡紧至定位孔中。
1. 拔出拉钮并旋转，使定位块离开孔位。
2. 向上抬起脚管反折收纳，
3. 旋转拉钮旋转拉钮使定位块卡紧至
定位孔中。
由于采用气压缓冲，重力越大气压越明显，
收缩中柱时请用较小力度下压。
图4
图1
图3
图2
16mm接头
1/4"螺丝
中柱
定位孔
脚管
脚垫
扳扣
卡紧式拉钮
2. 灯架展开
3. 灯架反折 4. 高度调整
灯具 灯架
DK18 4 28 19 19 550 1800 500 0.90 5
脚管管径 折叠高度
灯架参数表
如图：
打开扳扣，上下移动中柱，
至所需高度后，锁紧扳扣。

DK18 Carbon Fiber
Air-Cushioned
Light Stand
As is shown:
1. Pull out and twist the knob to remove
the block from the fixing hole.
2. Open the legs to your desired position.
3. Twist the knob back to sit the block in
the specific fixing hole.
As is shown:
1. Pull out and twist the knob to remove
the block from the fixing hole.
2. Pull up the legs.
3. Twist the knob back to sit the block
in the specific fixing hole.
Air cushioning gently lowers the light when making
height adjustments to protect equipment and fingers.
Fig. 4
Fig. 1
Fig. 3
Fig. 2
16mm Spigot
1/4"Screw
Center Column
Fixing Hole
Leg Tube
Rubber Foot
Flip Lock
Locking Knob
2. Stand Deployment
3. Reverse-Folding Legs 4. Height Adjustment
As is shown:
Open flip locks and adjust the
center column to your desired
height. Close the flip locks.
INSTRUCTIONS
1. Name of Parts
Please remove your gear (the fixture, for example) from the stand when
transporting the stand from one place to another.
DK18
28/1.104 19/0.75
1800/70.87 500/19.69 0.9/1.98 5/11.02
Data Chart
Section Max Tube Dia
(mm/inch)
Min Tube Dia
(mm/inch)
19/0.75
Tube Dia
(mm/inch)
550/21.65
Min Height
(mm/inch)
Max Height
(mm/inch)
Folded Height
(mm/inch)
Weight
(kg/lb)
Max Load
(kg/lb)
9 fixing holes help to lock
the legs to a specific
position more firmly. Pull out and twist the knob for
height adjustment. Twist the
knob back to secure your
desired height.