sisel ENDA EPDA1 Series User manual

THERMAL SPECIFICATIONS
INPUT
Tj Junction temperature (°C)
Rth(j-c)Junction-case thermal resistance (°C/W)
Rth(j-a)Junction-ambient thermal resistance (°C/W)
8 - 30VAC/DC
> 6VAC/DC
< 2VAC/DC
< 17mAac/10mAdc
Max. ½ Period
Max. ½ Period
90 - 240Vac
> 75Vac
< 6Vac
< 8mAac
Max.1 Period
Max. 2 Period
Input voltage
Pick-up voltage
Drop-out voltage
Input current
Turn-on time
Turn-off time
LED indicator
ENVIRONMENTAL CONDITIONS
2
II
Max. 1000m
IP20 According to EN60529
Ambient-storage temperature
Relative humidity
Pollution degree
Overvoltage category
Altitude
Protection
KEEP AWAY device from exposed to corrosive, volatile and flammable gases
or liquids and DO NOT USE the device in similar hazardous locations.
Order code
2500Vrms between I/O terminals for 1 min.
For power line max. 2,2Nm, for signal line max. 1,2Nm.
EN 60947-4-3
For power line 16mm² (with cable terminal 25mm² ) cable, for signal line 4mm² cable can be connected.
Order code
Isolation voltage
Connection
Mounting
Enclosure material
Dimensions
Weight (After packaging)
GENERAL
Avoid any liquid contact when the device is switched on.
DO NOT clean the device with solvent (thinner, gasoline, acid etc.) and / or abrasive cleaning agents.
Mounted to the panel by using M4 screws.
Self extinguishing plastics. (According to EN 60695-11-10 V-O)
Terminal screw torque
Product standard
OUTPUT
Load voltage/ current
Load curent, AC51/25ºC (Arms)
Load voltage (Vrms)
Overload current t=1s/25°C (Arms)
Non rep.surge current/25°C (Arms)
On-state voltage drop (Vrms)
Leakage current (mArms)
I²t For fusing t=10ms (A²s)
Frequency (Hz)
Minimum operating current (mArms)
3 - 30VDC
> 3VDC
< 2VDC
< 10mAdc
Max. ½ Period
Max. ½ Period
If input voltage is AC/DC >3V, LED lights up.
ENDA EPDA1, ESDA1, EPGA1, EPAA1, ESAA1 Panel Mounted Solid State Relays
Thank you for choosing ENDA EPDA1 / ESDA1 / EPGA1 / EPAA1 / ESAA1 Series Solid State Relays
12-25-40-50-70-100-120A AC Load current.
(Varies by model type. Please check the order code).
320-480 AC Load voltage.
3-30V DC (for only EPxx), 8-30V AC/DC or 90-240V AC input voltage.
LED status indicator for input voltage.
Zero-cross or Random-cross at AC voltage.
Applicable for three phase loads.
Built-in varistor protection.
Panel or Narrow Panel mounted.
CE Marked according to European Norms.
1/2
Read this document carefully before using this device. The guarantee will be expired by device damages if you don't attend to
the directions in the user manual. Also we don't accept any compensations for personal injury, material damage or capital
disadvantages.
Relative humidity 90% for temperatures up to 20°C decreasing linearly to 50% relative humidity at 40°C.
-25... +60°C/-30 ... +100°C (without icing and condensation)
If input voltage is AC/DC >6V, LED lights up. If input voltage is AC/DC >75V, LED lights up.
EPGA1-xxxZ ExDA1-xxxZ ExAA1-xxxZ
EPxA1-xxx-Z-EN-10-220103
EP D A 1 - 2 25 Z
EP
Load Current
Z
24-320V AC
50-480V AC
2
4
Pole Number
Single-pole
ESAA
EPDA EPGA ESDA
ORDER CODE
Product Basic Code
Panel Type
Narrow Panel Type ES
Input Voltage
3-30V DC
8-30V AC/DC
90-240V AC
G
D
A
Load Voltage
AC A
1
Switching
Zero-cross
12A AC
25A AC
40A AC
50A AC
70A AC
120A AC
100A AC
EPAA
12
25
40
50
70
50
12 12 12
12
25 25 25 25
40 40
40
40
50
100
120
70 70
100
120
Load Voltage
EPxA1-2xx/4xxZ/R = 95g
EPxA1-550/570Z/R = 110g
EPxA1-5100/5120Z/R = 115g
W45xH62xD31mm
EPxA1-xxxZ
ESDA1-2xx/4xxZ/R = 95g
ESDA1-xxxZ
W24xH101xD29mm
R
Random-cross
EPGA1-xxxR ExDA1-xxxR ExAA1-xxxR
EPxA1-xxxR ESDA1-xxxR
ESAA1-2xx/4xxZ/R = 95g
ESAA1-xxxZ
W24xH101xD29mm
ESAA1-xxxR
25
85
250
5
340
160
50 - 480
1,8
40
150
400
5
880
160
50
200
500
10
600
200
70
300
800
10
1600
320
50 - 60
1,6
100
540
1350
20
9100
500
120
720
1800
20
16200
500
24-320
1,6
50-60
212
12
50
120
78
5
160
225 240
25 40
85 150
250 400
340 880
440 450 470 4100 4120
425
≤125
2,3
≤20
≤
≤125
1,2
≤20
≤
≤125
0,7
≤20
≤
≤125
1,2
≤20
≤
≤125
1,0
≤20
≤
≤125
0,6
≤20
≤
≤125
0,4
≤20
≤
≤125
0,25
≤20
≤
≤125
0,3
≤20
≤

ZERO
CROSS
CIRCUIT
VARISTOR
RELAY
ON
high temperature
INPUT
AC/DC
OUTPUT
AC
1
23
4
Load
R
N
Single Phase
R
S
T
INPUT
R
S
N
T
Fuse
42mm
46mm
100mm
16mm
M3
M3
51mm
42mm
42mm
46mm
46mm
80mm
62mm
ENDA ETS-46-62
M3
M3
M3
M3
ENDA ETS-46-80
51mm
51mm
42mm
46mm
100mm
M3
M3
51mm
ENDA ETS-46-100
LOAD
25A
24-320VAC
ENDA
INPUT
8-30V AC/DC
EPDA1-225Z
SSR
RELAY ON
SN:1042xxxxx
12
43
Made in Turkey
LOAD
50
25A
-480VAC
ENDA
INPUT
8-30V AC/DC
EPDA1-425Z
SSR
RELAY ON
SN:1042xxxxx
12
43
Made in Turkey
LOAD
50
25A
-480VAC
ENDA
INPUT
8-30V AC/DC
EPDA1-425Z
SSR
RELAY ON
SN:1042xxxxx
12
43
Made in Turkey
LOAD
50
25A
-480VAC
ENDA
INPUT
8-30V AC/DC
EPDA1-425Z
SSR
RELAY ON
SN:1042xxxxx
12
43
Made in Turkey
LOAD
50
25A
-480VAC
ENDA
INPUT
8-30V AC/DC
EPDA1-425Z
SSR
RELAY ON
SN:1042xxxxx
12
43
Made in Turkey
LOAD
50
25A
-480VAC
ENDA
INPUT
8-30V AC/DC
EPDA1-425Z
SSR
RELAY ON
SN:1042xxxxx
12
43
Made in Turkey
+
GND
61mm
9mm
LOAD
25A
24-320VAC
ENDA
INPUT
8-30V AC/DC
EPDA1-225Z
SSR
RELAY ON
SN:1042xxxxx
12
43
Made in Turkey
31 mm
45 mm
62 mm 51 mm
52 x M5
2 x M3
11,6
8680407712250
ENDA EPDA1-225Z
!
WARNING Heatsink at
high temperature
24 mm
84 mm
ENDA
SOLID STATE
RELAY
LOAD
24-320VAC
40A
ESDA1-240Z
8-30V AC/DC
3
4
RELAY ON
21
++
+
+
WARNING
Heatsink at
high temperature
868040 7 71346 2
ENDA ESDA1-240Z
29 mm
INPUT
SN:1042xxxxx
101 mm
94 mm
5
2 x M3
2 x M3
Made in Turkey
Thermal
Resistance
2,0
1,7
1,5
1,0
0,7
0,4
(°C/W)
Dimensions
WxHxD
(mm)
46x61x62
46x61x80
46x61x100
62x77x100
46x61x116
62x77x126
SSR
Current
(A)
12-25
20-25
25-40
40-50
50-70
70-120
Heatsink
ETS-46-62
ETS-46-80
ETS-46-100
ETS-62-100
ETS-46-100F
ETS-62-100F
51mm
M3
M3
77mm 72mm
79mm
9mm
58mm21mm
100mm 26mm
5mm5mm
CONNECTION SAMPLES CONNECTION DIAGRAM
DIMENSIONS
ENDA ETS SERIES RAIL AND
PANEL MOUNTED HEATSINKS
ENDA ETS-46-100F ENDA ETS SERIES RAIL
AND PANEL MOUNTED HEATSINK
Three Phase Load Applied
With Two SSRs
Three Phase Load Applied
With Three SSRs
Fuse
Fuse
Fuse
Fuse
Fuse
INPUT
INPUT
INPUT
Fan Supply : 24VDC, 220mA.
The fan side of the device must be located at the bottom.
Fan Supply : 24VDC, 100mA.
The fan side of the device must be located at the bottom.
Please refer to "ENDA ETS Series Rail and Panel Mounted Heatsinks“ manual
for details. Contact your local dealer(s) or download the latest manual from
http://enda.com/en/automation/ssr/heatsink/ ENDA website.
2/2
SİSEL MÜHENDİSLİK ELEKTRONİK SAN. VE TİC. A.Ş.
Şerifali Mah. Y.Dudullu 34775
ÜMRANİYE/İSTANBUL-TURKEY
Tel : [phone] Pbx. Fax : [phone]
url : www.enda.com.tr
Barbaros Cad. No:18
INPUT
INPUT
EPxA1-xxx-Z-EN-10-220103