Sistemalux MINI LOOK User manual

MIN
56MM
A- INSTALL FLANGE ACCESSORY (TO BE ORDERED SEPARATELY) IN CONCRETE FLUSH WITH THE MOUNTING SURFACE (
12" OF GRAVEL IS REQUIRED BELOW THE LUMINAIRE TO ALLOW PROPER DRAINAGE).
FLANGE
ACCESSORY
CONCRETE
OK
90°
NO!
CONDUIT
MAX Ø 30mm
8½" x 1¼" x 9¼"
(217mm x 33mm x 235mm)
8½" x 1¾" x 9¼"
(290mm x 43mm x 231mm)
Flange dimensions
S7249
S7269
Flange accessory code
MINI LOOK
LOOK
3¾" x 1¾" x 6⅝"
(96mm x 45mm x 167mm)
S7284
MICRO COOL SQUARE
5⅝" x 3⅝" x 9⅞
(149mm x 66mm x 251mm)
8½" x 3⅜" x 9⅞
(217mm x 85mm x 250mm)
S7288
S7289
MINI COOL
COOL
COOL SQUARE
MINI COOL SQUARE
S.7206, S.7211, S7215, S.7220, S.L9206, S.L9211
S.7260, S.7261, S.7262, S.7265, S.7266, S.7267
S.7287
S.7236, S.7241,
S.7245, S.7246
S.7285
S.7286, S.L9236, S.L9241
Model Model Code
A
NO!
LOOK / COOL
MODEL : LOOK / MINI LOOK / COOL / COOLSQUARE / MINI COOL
MINI COOL SQUARE MICRO COOL SQUARE BOLLARD
INSTRUCTIONS SHEET PAGE: 1 of 3
INS-767
9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7
P.: 514.523.1339 F.: 514.525.6107 www.sistemalux.com
CL - R0Last update: August 19, 2020
IMPORTANT - READ CAREFULLY BEFORE INSTALLING FIXTURE. RETAIN THESE INSTRUCTIONS FOR FUTURE REFERENCE.
THIS PRODUCT MUST BE INSTALLED IN ACCORDANCE WITH THE NATIONAL ELECTRICAL CODE AND ALL APPLICABLE LOCAL CODES, BY A PERSON FAMILIAR WITH THE
CONSTRUCTION AND OPERATION OF THE PRODUCT, AND THE HAZARDS INVOLVED. PROPER GROUNDING IS REQUIRED FOR SAFETY.
DISCONNECT THE MAIN LINE BEFORE WIRING SECONDARY CONNECTORS.
INSTALLATION IN CONCRETE WITH FLANGE
REMOTE DRIVER (REM)

C + D + EB
B- UNSCREW THE SCREWS WITH ALLEN KEY (INCLUDED) AND PULL MOUNTING BASE OFF THE MAIN BODY.
C- MAKE ALL WIRE CONNECTIONS (FOLLOWING POLARITY MARKING) USING WATERTIGHT CONNECTOR (NOT INCLUDED).
D- FASTEN MOUNTING BASE TO FLANGE ACCESSORY USING (2) FLANGE ACCESSORY NUTS (INCLUDED).
E- PLACE MAIN BODY INTO MOUNTING BASE AND FASTEN SCREWS.
MAIN BODY
MOUNTING
BASE
WATERTIGHT
CONNECTOR
(NOT INCLUDED)
SCREWS
FLANGE ACCESSORY
NUTS (INCLUDED)
SCREWS
ALLEN KEY
(INCLUDED)
C
D
D
E
LOOK / COOL
MODEL : LOOK / MINI LOOK / COOL / COOLSQUARE / MINI COOL
MINI COOL SQUARE MICRO COOL SQUARE BOLLARD
INSTRUCTIONS SHEET PAGE: 2 of 3
INS-767
9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7
P.: 514.523.1339 F.: 514.525.6107 www.sistemalux.com
CL - R0Last update: August 19, 2020

A
INSTALLATION IN CONCRETE WITH FLANGE
REMOTE DRIVER (REM)
LOOK / COOL
A- UNSCREW THE SCREWS WITH ALLEN KEY (INCLUDED) AND PULL MOUNTING BASE OFF THE MAIN BODY.
B- FASTEN MOUNTING BASE TO CONCRETE OR WOOD SURFACE USING (2) APPROPRIATE SCREWS (NOT INCLUDED).
C- MAKE ALL WIRE CONNECTIONS, PLACE MAIN BODY INTO MOUNTING BASE AND FASTEN SCREWS.
MAIN BODY
MOUNTING BASE
MAIN BODY
SCREWS
ALLEN KEY
(INCLUDED)
MOUNTING
BASE
SCREW
(NOT INCLUDED)
SURFACE
B + C
3"
(75mm)
MINI LOOK / MINI COOL
2⅛"
(55mm)
MICROCOOL SQUARE
2"
(49mm)
⅞"
(22mm)
2½"
(65mm)
⅞"
(22mm)
MINICOOL SQUARE
4¾"
(120mm)
1⅜"
(36mm)
COOL SQUARE
B
C
LOOK / COOL
MODEL : LOOK / MINI LOOK / COOL / COOLSQUARE / MINI COOL
MINI COOL SQUARE MICRO COOL SQUARE BOLLARD
INSTRUCTIONS SHEET PAGE: 3 of 3
INS-767
9320 Boul. St-Laurent, suite 100, Montréal (Québec) Canada H2N 1N7
P.: 514.523.1339 F.: 514.525.6107 www.sistemalux.com
CL - R0Last update: August 19, 2020