Cooper Lighting Halo L641 User manual

DESCRIPTION
A. Structural
Extruded aluminum .060"
[1.5mm] nominal wall thickness.
Halo-2 Power-Trac is 11/16”
(17.5mm) deep by 1 3/8” (35mm)
wide. Same as Halo Miniature
Trac.
B. Line Conductors
Solid copper buss bars [cross
section equivalent to #12 AWG
wire. encased in rigid extruded
PVC insulators.
C. Insulating Liner
Rigid extruded polyvinyl
insulators.
D. Ground Conductor
Exclusive independent
grounding buss conductor.
Maintains an independent
positive ground #12 AWG path
between lampholder, Trac
channel and building’s ground
system.
E. Neutral Conductor
Cross section equivalent of #12
AWG wire.
F. Polarity Indicator (Neutral)
Visual polarity groove indicates
proper electrical installation of
lampholder adapter. All Halo-2
Power-Trac is shipped from the
factory with a “LEFT” dead end
installed. The L941 Live End
Connector is designed to attach
to the right hand side of the track.
Locate small polarity indicator on
the connector and align with
polarity groove on track.
Listing
Halo-2 Trac is UL listed and CSA
certified for use with Halo and
Lazer-by-Halo lampholders.
SPECIFICATION FEATURES
Halo-2 Power-Trac system provides two separate 20 AMP circuits. Each
circuit can be independently switched. Provides maximum flexibility, with
a miniature profile. Suitable for a wide range of commercial,
merchandising and residential applications. Electrical capacity is 20
AMPS per circuit when properly balanced. Installing lampholders is
simple. An adjustable contact allows selection of the circuit position. Lift
or lower the contact until it touches the plastic stop of the assembly. For
circuit #1 move contact to the down position. For circuit #2 move contact
to the up position. Halo 2-Circuit Track accepts both Halo and Lazer-by-
Halo lampholders.
A
B
BD
E
C
F
(See Below)P=Satin White
MB=Matte Black
SL=Silver
ORDERING INFORMATION
SAMPLE NUMBER: 641MB
L641=4'
L642=8'
L643=12'
AccessoriesFinishesTrac
L641
L =4'. Actual length
42 5/8" [1083mm]
W =1 3/8" [35mm]
H =11/16" [17.5mm]
Color codes
P = White
MB = Black
SL = Silver
L642
L =8'. Actual length
90 5/8" [2302mm]
W =1 3/8" [35mm]
H =11/16" [17.5mm]
Color codes
P = White
MB = Black
SL = Silver
L643
L =12'. Actual length
138 5/8" [3521mm]
W =1 3/8" [35mm]
H =11/16" [17.5mm]
Color codes
P = White
MB = Black
SL = Silver
Y
H
W
Connectors
L900 Outlet Box Cover
L941 Live End connector
L942 Flexible Connector
L943 Straight/“L” Connector
L945 “T” Connector
L946 “X” Connector
L949 Mini Joiner
L947 Conduit Connector
L989 Conduit Continuation Kit
L980 Live End Conduit
Adapter
Accessories
L951 Wire Way Cover for
Pendant Assembly Kit
L983 T-Bar Attachment Clip
L992 Pendant Kit assembly
L18 18” Steel Stem
L36 36” Steel Stem
L48 48” Steel Stem
L994 Pendant Adapter
DE641 Dead End
L641
L642
L643
L641, L642, L643
MINIATURE
TWO CIRCUIT
TRAC SYSTEM
Power-Trac
HALO® HALO®
ADV042180
Supersedes ADV021435 & ADV990381
9/04
TAB: Track Systems
Sheet 4
Note: Specifications and Dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX [phone]
Cooper Lighting 59225 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX [phone]
Catalog# Type
Date
Project
Comments
Prepared by

HALO®
DESCRIPTION
Polarity Indicators
Neutral is indicated on two circuit power track by the groove placed along the flange of the track. The connectors
show neutral polarity by the arrow on the end of the connector. The left handed T connector, L945L has an arrow
facing left when the crossbar of the T is at the bottom, and “Halo-2” is right-reading. The L945R, a right handed T
connector has the arrow facing right when the crossbar of the T is at the bottom, and “Halo-2” is right-reading.
Polarity
Groove
Polarity
Groove
Polarity
Groove
Polarity
Arrows
Polarity
Arrow
Polarity
Arrows
Left T Right T
Track Track Track
L945L L945RL941
L942
L941
L900
L641, L642, L643
CONNECTORS
AND
ACCESSORIES
Sheet A
L900 Outlet Box Cover
Can be used at any electrical feed connection point (Live,
Straight, L, T or X). Drill guides on back for virtually all
standard outlet boxes. Size: 5” sq. Screws included.
Color codes: P (White), MB (Black)
L941 Live End Connector
To start a run. Right hand polarity.
(Left hand polarity live end connector available.
Consult factory).
Color codes: P (White), MB (Black)
L942 Flex Joiner
To connect two track sections at any angle up to
90,° in either plane or wall to ceiling or pitched
ceiling applications.
Color codes: P (White), MB (Black)
ORDERING INFORMATION
L900
Connector Finish
ORDERING INFORMATION
L941
Connector Finish
ORDERING INFORMATION
L942
Connector Finish
5 1/2"
(140mm)
3 3/8"
(86mm)
6 5/8"
(169mm)
1 3/8 "
(35mm)
4 1/2"
(115mm)
3 3/8 "
(86mm)
11/16"
(17mm)
1 1/4 "
(32mm)
1 1/4"
(32mm)
5 "
(127mm)
5"
(127mm)
3/32 "
(2.4mm)
Note: Specifications and Dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX [phone]
Cooper Lighting 59225 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX [phone]

HALO®
Note: Specifications and Dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX [phone]
Cooper Lighting 59225 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX [phone]
L943
L943 Straight/L Connector
To connect two track sections end-to-end or at a
90° angle. May be used as feed point.
Color codes: P (White), MB (Black)
ORDERING INFORMATION
L943
Connector Finish
5 3/8 "
(137mm)
7 5/8"
(194mm)
2 3/8 "
(2.375)
3 1/2"
(89mm)
2 3/8"
(60mm)
3 1/2"
(89mm)
L945R
L945L
ORDERING INFORMATION
L945R
Connector Finish
ORDERING INFORMATION
L945L
Connector Finish
5 3/8 "
(137mm)
7 5/8"
(194mm)
L945R Right T Connector
“T” connector for joining three trac sections with
right hand polarity. May be used as feed point.
Color codes: P (White), MB (Black)
L945L Left T Connector
“T” connector for joining three trac sections with
left hand polarity. May be used as feed point.
Color codes: P (White), MB (Black)
L946 X Connector
To connect four track section into a cross
configuration. May be used for feed point.
Color codes: P (White), MB (Black)
L947 Conduit Connector
A live end connector for use with surface conduit.
Designed to accept standard 1/2” conduit fitting
(not included). May be used for feed point.
Color codes: P (White), MB (Black)
L946
ORDERING INFORMATION
L946
Connector Finish
L947
ORDERING INFORMATION
L947
Connector Finish
1 3/8"
(35mm)
1 3/8"
(35mm)
1 1/2"
(38mm)
4 7/8"
(124mm)
5 3/8 "
(137mm)
7 5/8"
(194mm)
5 3/8 "
(137mm)
7 5/8"
(194mm)

HALO®
Note: Specifications and Dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX [phone]
Cooper Lighting 59225 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX [phone]
L949
ORDERING INFORMATION
L949
Connector Finish 2 1/2"
(64mm)
951
ORDERING INFORMATION
L951
Connector Finish
1 3/8"
(1.375)
8 1/8"
(207mm)
3/16"
(2.8mm)
15/16"
(24mm)
Track
13/16"
(21mm) L901, L902, L903,
L904, L905 or L906
Stem
L951 Cover
L949 Mini Joiner
To join two straight track sections end-to-end.
Not a feed point.
Color codes: P (White), MB (Black)
L951 Wire Way Cover for Pendant Assembly Kit
For track to be wired through stem (one for
each live end used). Shown with end feed and pendant
stem kit–order separately
Color codes: P (White), MB (Black)
L983 T-Bar Attachment Clip
Allows track to be attached to inverted tee ceiling. Order as follows:
2 kits for 4’ Trac; 3 kits for 8’ Trac and 4 kits for 12’ Trac.
L986 Mini-T Bar Clip
For mounting Trac on suspended ceilings with mini-grid (9/16” wide)
system.
L989 Conduit Continuation Kit
Includes one left and one right feed. To
continue a run around obstructions
with 1/2” trade size surface conduit.
Color codes: P (White), MB (Black)
L983
1 1/2"
(38mm)
13/16"
(21mm)
1 1/16"
(27mm)
ORDERING INFORMATION
L98_
Connector
L989
ORDERING INFORMATION
L989
Connector Finish
1 3/8"
(35mm)
1 3/8"
(35mm)
1 1/2"
(38mm)
4 7/8"
(124mm)
DESCRIPTION

HALO®
Note: Specifications and Dimensions subject to change without notice.
Visit our web site at www.cooperlighting.com
Customer First Center 1121 Highway 74 South Peachtree City, GA 30269 770.486.4800 FAX [phone]
Cooper Lighting 59225 McLaughlin Rd. Mississauga, Ontario, Canada L5R 1B8 905.507.4000 FAX [phone]
ORDERING INFORMATION
L909
Connector Finish
4 1/4 "
(108mm)
4 1/4"
(108mm)
1 3/8"
(35mm)
3 1/4"
(83mm)
1/4"
(6.4mm)
L929
L992
L994
DESCRIPTION
ORDERING INFORMATION
L992
Connector Finish
ORDERING INFORMATION
L994
Connector Finish
18"
458mm
5"
(127mm)
2 5/8"
(69mm)
5 7/8"
(150mm)
1 7/8"
(48mm)
1 5/16"
33mm
1"
(25mm)
13/16"
(21mm)
L929 Floating Canopy and Connector
Can be connected anywhere along length of Trac.
Comes with canopy cover, connector, dead-end and
mounting hardware.
Color codes: P (White), MB (Black)
L992 Pendant Kit Assembly
To suspend track from ceiling. Order as follows:
2 kits for 4’ Trac; 3 kits for 8’ Trac; and 4 kits for
12’ Trac. Includes one 18” threaded steel stem,
canopy and mounting hardware.
Color codes: P (White), MB (Black)
L48 48” Steel Stem
For additional length of stem for L992. Can be
field cut and threaded.
Color codes: P (White), MB (Black)
L994 Pendant Adapter
For installing pendant mounted Power-Trac on
sloped ceiling. For use with L992.
Color codes: P (White), MB (Black)