Sitron NSR-0801 Instruction manual

Connection BUS converter NSR-0801
ConnectoConnectorrofof eemmitteitterrfrom
SULG-A4 (M12 x 1, 4 pin)
ConnectioConnectionn toto
eemmitteitterrof SULG-A4
ConnectorUSB 2.0
Connector of receiver
from SULG-A4 (M12 x1, 8
pin)
ConnectioConnectionn toto
rreceiveeceiverrdes SULG-A4

BUS converter NSR-0801
Using of NSR
-
0801
Using of NSR
-
0801
-Diagnostics:
Ø
Operating status
Ø
Operating status
ØArrangement quality and error indicator
RS-232 ØConnector e.g. restart-signal, muting sensors
Ø
Calculation of safety distance
USB 2.0
PC
NSR-0801
E R
RE
Ø
Calculation of safety distance
-Parametrisation of functions:
Klemmbox
ØBlanking fix-and floating, beam coding,
Relay control (EDM), start interlock
Cablebox
Schaltschrank /
Maschine
24V/DC
ØMuting
Ø
Cycle,1 to 8 cycle
Electrical
cabinet/
machine
Ø
Cycle,1 to 8 cycle
ØSaving of activ configuration

NSR-0801 -Hardware
Whatistoconsider-Hardware?
1) Switch- off power supply of SULG-A4
2) ConnectingConnecting cablecable ofof controlcontrol cabinetcabinet fromfrom SULG-A withwith NSRNSR--08010801
< emitter o r receiver > (do not connectbothatonce)
Connection:
Receiver
for
all
functions
Connection:
Receiver
for
all
functions
(Emitter forbeam codingonly)
3) Connecting cable box M12 from NSR-0801 to SULG-A
4) Switch-on power supply
5) Connecting USB- cable to PC/Laptop
6) Start software (more info next page)
7) LED‘sLED‘s onon emitteremitter signalisesignalise aa connectionconnection withwith SULG-A4 andand softwaresoftware
(LED red and green flashing)

NSR-0801 -Software
Whatistoconsider-Software?
1) Unpack and install: SLC4Instkunde.zip
2) StartStart datadata filefile: installation.exe: installation.exe
3) Choose language: German or English
4) InstallInstall-- Assistant:Assistant: confirmconfirm twicetwice
5) Start software –receiver and emitter scale
Port select:
USB
or COM
USB
or COM
Check connection:
connect
respectively
connect
respectively
disconnect

NSR-0801 –Software
Change configuration:
-
password
r
equired
: 1 2 3 4
-
password
r
equired
: 1 2 3 4
Transfer configuration:
-
Save
settings
-
Save
settings
-Confirmwithin10 seconds
-
Save
configuration
to
text
file
-
Save
configuration
to
text
file
Saving
of
configuration
:
Saving
of
configuration
:
-Version with data of SULG
-Date and agent
-All specifications

NSR-0801 –Safety distance calculation
safetydistance calculate