skeye. HW 90240 User manual

User Guide
skeye.dart with Windows Mobile 6.5
HW 90240
Version 1.00

his document and its contents shall not be reproduced or transferred in any form without
express permission. Compensation will be claimed for any infringement. All rights reserved in
the event of patenting or registration of utility models.
© Höft & Wessel AG 2010
Subject to amendment, errors excepted
BHB_skeye-dart_HW90240_WM_1-0_EN.doc

ABLE OF CON EN S
26.03.2010 • 1.00 3
Table of contents
1. Introduction ................................................................................................. 5
1.1 Document Information ............................................................................... 5
1.2 Changes ................................................................................................... 5
1.3 erminology.............................................................................................. 5
1.4 Readership................................................................................................ 5
1.5 Intended Use ............................................................................................ 6
1.6 Microsoft Software License erms for Windows Mobile 6 Software ................... 6
1.7 Safety Notes ............................................................................................. 9
1.7.1 General Safety Notes ........................................................................... 9
1.7.2 Safety Notes for the Lithium-Ion Battery................................................10
1.7.3 Safety Notes for the Desktop Cradle/Car Charging Cradle ........................14
1.7.4 Safety Notes for the Power Supply ........................................................14
1.7.5 Safety Notes on the Camera/Imager with LED Aimer...............................15
1.7.6 Safety Notes on GSM/GPRS/EDGE.........................................................15
1.7.7 Safety Notes on Wireless LAN/Bluetooth ................................................16
1.7.8 Safety Notes on Data Loss ...................................................................16
1.8 Disposal ..................................................................................................16
1.9 Explanations on this Manual .......................................................................17
1.9.1 Note Pictograms .................................................................................17
1.9.2 Registered rademark .........................................................................18
2. skeye.dart................................................................................................... 19
2.1 Accessories ..............................................................................................19
2.2 Desktop Cradle.........................................................................................19
2.3 Hardware Equipment.................................................................................19
2.4 Views ......................................................................................................19
2.4.1 Front View .........................................................................................19
2.4.2 Side View...........................................................................................20
2.4.3 Rear View ..........................................................................................20
2.5 LED Function Displays ...............................................................................20
3. Taking into Operation ................................................................................. 21
3.1 Switching on the Backup Battery ................................................................21
3.2 Inserting the MicroSD Card ........................................................................22
3.3 Inserting the SIM Card ..............................................................................23
3.4 Battery ....................................................................................................24
3.4.1 Inserting the Battery ...........................................................................24
3.4.2 Replacing the Battery ..........................................................................25
3.4.3 Charging the Battery ...........................................................................25
3.5 Switching-on/Switching-off the skeye.dart ...................................................26
3.5.1 Switching-On .....................................................................................26
3.5.2 Switching Off......................................................................................26
3.5.2.1 Suspend Mode ..............................................................................26
3.5.2.2 Automatic Standby – Power Supply .................................................27
4. Initial Steps ................................................................................................ 29
4.1 Operating the skeye.dart with the Stylus .....................................................29
4.2 Microsoft Windows Mobile ..........................................................................30
4.2.1 Start Screen.......................................................................................30
4.2.2 Start Menu.........................................................................................30
4.2.3 Desktop Symbols ................................................................................31
4.2.4 Right Mouse Button Function ................................................................31
4.2.5 Basic Settings.....................................................................................31
4.2.6 System Info .......................................................................................32
4.3 Image Update ..........................................................................................34

ABLE OF CON EN S
4 1.00 • 26.03.2010
5. Radio .......................................................................................................... 3
5.1 Wireless LAN Configuration ........................................................................37
5.2 Establishing a GPRS Connection..................................................................41
6. Desktop Cradle ........................................................................................... 49
6.1 echnical Data..........................................................................................49
6.2 Charging the Battery in the Desktop Cradle..................................................50
6.3 Connecting the Desktop Cradle to the Desktop PC.........................................50
6.4 Communication skeye.dart ⇔ PC ................................................................51
6.5 Application of USB Host .............................................................................51
. Technical Data ............................................................................................ 52
8. Toubleshooting ........................................................................................... 53
8.1 Soft Reset................................................................................................53
8.2 Factory Reset ...........................................................................................53

IN RODUC ION
Document Information
26.03.2010 • 1.00 5
1. Introduction
he proven industry PDA skeye.dart combines appealing design and comfortable
operation with state-of-the-art technology and robustness.
he multifunctional skeye.dart is the ideal work instrument for all applications in
the field service and logistics.
For data transmission, in addition to the WLAN module compliant with IEEE 802.11
b/g, the device also has a GPRS/EDGE module; accordingly, all the relevant data is
always available up to date. A GPS module facilitates navigation as well as tracking
of the device.
1.1 Document Information
Product: skeye.dart with Windows Mobile 6.5
ype of Document: User Guide
Version: 1.00
Author: Lin
Höft & Wessel AG, Hannover
1.2 Changes
Version: Changes: Date: By:
01.00 First version 26.03.2010
Cha/Lin/GH
1.3 Terminology
skeye.dart FFE
HW 90240 FFE
Portable Data erminal (in the following referred to as “mobile
terminal”) with WLAN IEEE 802.11b/g, Bluetooth 2.0,
GSM/GPRS/EDGE and GPS
Battery HW 19240 he mobile terminal is supplied by a rechargeable lithium-ion
battery
Desktop Cradle USB
HW 50240
Desktop Cradle with USB interface for the mobile terminal
Power supply unit Wide range switched mode power supply unit to provide the
mobile terminal and the desktop cradle with power.
Car Charging Cradle
HW 51240
For installation of the skeye.dart in vehicles and for charging
of the battery.
1.4 Readership
he documentation is intended for people operating the skeye.dart.

IN RODUC ION
Intended Use
6 1.00 • 26.03.2010
1.5 Intended Use
he skeye.dart has been designed for use in the commercial sector and for
acquiring and transferring data within buildings or vehicles or outside under
moderate climate conditions.
he skeye.dart is not intended for distribution to private households.
Please pay attention to the information of this user guide, especially the safety
notes. Intended use means that the device must only be used and operated in
accordance with the information contained herein. Any other use is not an intended
use and may lead to property damage or even personal injury. Höft & Wessel does
not accept any liability for damages caused by a usage other than the intended
usage.
1.6
1.61.6
1.6 Microsoft Software License Terms for Windows Mobile 6
Software
hese license terms are an agreement between you and Höft & Wessel AG (“Company”).
Please read them. hey apply to the software included on this device. he software also
includes any separate media on which you received the software.
he software on this device includes software licensed by Company from Microsoft
Corporation or its affiliate.
he terms also apply to any
•updates,
•supplements,
•Internet-based services, and
•support services
for this software, unless other terms accompany those items. If so, those terms apply.
As described below, using some features also operates as your consent to the
transmission of certain standard computer information for Internet-based services.
By using the software, including use on this device, you accept these terms. If you
do not accept them, do not use the device or software. Instead, contact Company
to determine its return policy for a refund or credit.
WARNING: If the software contains voice operated technologies, then operating this
software requires user attention. Diverting attention away from the road while driving can
possibly cause an accident or other serious consequence. Even occasional, short diversions
of attention can be dangerous if your attention is diverted away from your driving task at a
critical time. Company and Microsoft make no representations, warranties or other
determinations that ANY use of this software is legal, safe, or in any manner recommended
or intended while driving or otherwise operating a motor vehicle.
If you comply with these license terms, you have the rights below.
1. USE RIGHTS.
You may use the software on the device with which you acquired the software.
2. ADDITIONAL LICENSING REQUIREMENTS AND/OR USE RIGHTS.
a. Specific Use. Company designed this device for a specific use. You may only use
the software for that use.
b. Included Microsoft Programs and Additional Required Licenses. Except as
provided below, these license terms apply to all Microsoft programs included with the
software. If the license terms with any of those programs give you other rights that
do not expressly conflict with these license terms, you also have those rights.

IN RODUC ION
Microsoft Software License erms for Windows Mobile 6 Software
26.03.2010 • 1.00
i. his agreement does not grant you any rights with respect to the Windows
Mobile Device Center, Micro-soft ActiveSync or Microsoft Outlook 2007 rial
which are subject to the licenses accompanying those items.
c. Speech Recognition. If the software includes speech recognition
component(s), you understand that speech recognition is an inherently
statistical process and that recognition errors are inherent in the process.
Neither Company nor Microsoft or their suppliers shall be liable for any
damages arising out of errors in the speech recognition process.
d. Phone Functionality. If the device software includes phone functionality, all or
certain portions of the device software may be inoperable if you do not have and
maintain a service account with a wireless telecommunication carrier (“Mobile
Operator”), or if the Mobile Operator’s network is not operating or configured to
operate with the device.
3. SCOPE OF LICENSE. he software is licensed, not sold. his agreement only gives you
some rights to use the software. Company and Microsoft reserve all other rights. Unless
applicable law gives you more rights despite this limitation, you may use the software
only as expressly permitted in this agreement. In doing so, you must comply with any
technical limitations in the software that allow you to use it only in certain ways. You
may not:
• work around any technical limitations in the software;
• reverse engineer, decompile or disassemble the software;
• make more copies of the software than specified in this agreement;
• publish the software for others to copy;
• rent, lease or lend the software; or
• use the software for commercial software hosting services.
Except as expressly provided in this agreement, rights to access the software on this
device do not give you any right to implement Microsoft patents or other Microsoft
intellectual property in software or devices that access this device.
You may use remote access technologies in the software such as Remote Desktop Mobile
to access the software remotely from a computer or server. You are responsible for
obtaining any licenses required for use of the protocols to access other software.
4. INTERNET-BASED SERVICES. Microsoft provides Internet-based services with the
software. Microsoft may change or cancel them at any time.
a. Consent for Internet-Based Services. he software features described below
connect to Microsoft or service provider computer systems over the Internet. In
some cases, you will not receive a separate notice when they connect. You may
switch off some of these features or not use them. For more information about these
features, visit http://go.microsoft.com/fwlink/?LinkId=81931.
By using these features, you consent to the transmission of this information.
Microsoft does not use the information to identify or contact you.
Device Information. he following features use Internet protocols, which send to the
appropriate systems device information, such as your Internet protocol address, the
type of operating system, browser and name and version of the software you are
using, and the language code of the device where you installed the software.
Microsoft uses this information to make the Internet-based services available to you.
• Windows Mobile Update Feature. he Windows Mobile Update feature
provides you the ability to obtain and install software updates on your device
if updates are available. You may choose not to use this feature. Company
and/or your Mobile Operator may not support this feature or an update for
your device.
• Windows Media Digital Rights Management. Content owners use
Windows Media digital rights management technology (WMDRM) to protect
their intellectual property, including copyrights. his software and third party
software use WMDRM to play and copy WMDRM-protected content. If the
software fails to protect the content, content owners may ask Microsoft to

IN RODUC ION
Microsoft Software License erms for Windows Mobile 6 Software
8 1.00 • 26.03.2010
revoke the software’s ability to use WMDRM to play or copy protected
content. Revocation does not affect other content. When you download
licenses for protected content, you agree that Microsoft may include a
revocation list with the licenses. Content owners may require you to upgrade
WMDRM to access their content. Microsoft software that includes WMDRM
will ask for your consent prior to the upgrade. If you decline an upgrade,
you will not be able to access content that requires the upgrade.
b. Misuse of Internet-based Services. You may not use these services in any
way that could harm them or impair anyone else’s use of them. You may not use the
services to try to gain unauthorized access to any service, data, account or network
by any means.
5. NOTICES ABOUT THE MPEG-4 VISUAL STANDARD. he software may include MPEG-
4 visual decoding technology. his technology is a format for data compression of video
information. MPEG LA, L.L.C. requires this notice:
USE OF HIS PRODUC IN ANY MANNER HA COMPLIES WI H HE MPEG-4 VISUAL
S ANDARD IS PROHIBI ED, EXCEP FOR USE DIREC LY RELA ED O (A) DA A OR
INFORMA ION (i) GENERA ED BY AND OB AINED WI HOU CHARGE FROM A
CONSUMER NO HEREBY ENGAGED IN A BUSINESS EN ERPRISE, AND (ii) FOR
PERSONAL USE ONLY; AND (B) O HER USES SPECIFICALLY AND SEPARA ELY
LICENSED BY MPEG LA, L.L.C.
If you have questions about the MPEG-4 visual standard, please contact MPEG LA,
L.L.C., 250 Steele Street, Suite 300, Denver, CO 80206; www.mpegla.com.
6. DIGITAL CERTIFICATES. he software uses digital certificates in X.509 format. hese
digital certificates are used for authentication.
. CONNECTIVITY SOFTWARE. Your device package may include Windows Mobile Device
Center or Microsoft ActiveSync software. If it is included, then you may install and use it
in accordance with the license terms that are provided with it. If no license terms are
provided, then you may install and use only one (1) copy of the software on a single
computer.
8. NETWORK ACCESS. If you are using a network, such as an employer network, the
network administrator may limit features or functionality on your device.
9. PRODUCT SUPPORT. Contact Company for support options. Refer to the support
number provided with the device.
10. LINKS TO THIRD PARTY WEBSITES. If the software provides links to third party
websites, those links are provided to you only as a convenience, and the inclusion of any
link does not imply an endorsement of the third party website by Microsoft.
11. BACKUP COPY. You may make one backup copy of the software. You may use it only
to reinstall the software on the device.
12. PROOF OF LICENSE. If you acquired the software on the device, or on a disc or other
media, a genuine Certificate of Authenticity label with a genuine copy of the software
identifies licensed software. o be valid, this label must be affixed to the device, or
included on or in Company’s software packaging. If you receive the label separately, it is
not valid. You should keep the label on the device or packaging to prove that you are
licensed to use the software. o identify genuine Microsoft software, see
http://www.howtotell.com.
13. TRANSFER TO A THIRD PARTY. You may transfer the software only with the device,
the Certificate of Authenticity label, and these license terms directly to a third party.
Before the transfer, that party must agree that these license terms apply to the transfer
and use of the software. You may not retain any copies of the software including the
backup copy.
14. NOT FAULT TOLERANT. The software is not fault tolerant. Company installed
the software on the device and is responsible for how it operates on the device.
15. RESTRICTED USE. he Microsoft software was designed for systems that do not require
fail-safe performance. You may not use the Microsoft software in any device or system
in which a malfunction of the software would result in foreseeable risk of injury or death

IN RODUC ION
Safety Notes
26.03.2010 • 1.00 9
to any person. his includes operation of nuclear facilities, aircraft navigation or
communication systems and air traffic control.
16. NO WARRANTIES FOR THE SOFTWARE. The software is provided “as is”. You
bear all risks of using it. Microsoft gives no express warranties, guarantees or
conditions. Any warranties you receive regarding the device or the software do
not originate from, and are not binding on, Microsoft or its affiliates. When
allowed by your local laws, Company and Microsoft exclude implied warranties
of merchantability, fitness for a particular purpose and non-infringement.
1 . LIABILITY LIMITATIONS. You can recover from Microsoft and its affiliates only
direct damages up to fifty U.S. Dollars (U.S. $50.00), or equivalent in local
currency. You cannot recover any other damages, including consequential, lost
profits, special, indirect or incidental damages.
This limitation applies to:
• anything related to the software, services, content (including code) on third
party internet sites, or third party programs, and
• claims for breach of contract, breach of warranty, guarantee or condition,
strict liability, negligence, or other tort to the extent permitted by applicable
law.
It also applies even if Microsoft should have been aware of the possibility of the
damages. The above limitation may not apply to you because your country may
not allow the exclusion or limitation of incidental, consequential or other
damages.
18. EXPORT RESTRICTIONS. he software is subject to United States export laws and
regulations. You must comply with all domestic and international export laws and re
gulations that apply to the software. hese laws include restrictions.
1. Safety Notes
Carefully read and follow the user manual and the safety information mentioned in
this chapter before performing further steps. You have to:
•read
•keep the information in mind during work.
his is the precondition for
•secure working with the product
•undisturbed handling
1. .1 General Safety Notes
Transport and Storage:
♦he device must only be shipped in original or comparable robust packaging.
Shipping the device e.g. in a normal padded bag does not provide sufficient impact
and pressure protection.
Such improper packaging would fall under the definition of the term Negligence.
Handling:
♦Never expose the skeye.dart to very high temperatures for a long time.
♦Never insert any objects not intended for use with this device in the instrument’s
openings. his might damage the device.

IN RODUC ION
Safety Notes
10 1.00 • 26.03.2010
Operating:
♦Do not dip the skeye.dart into fluid.
♦Only use your skeye.dart with original equipment. Non-compliance voids the
warranty.
♦Do not operate your skeye.dart when you are in explosive areas, for instance in
petrol stations, fuel depots, chemical plants, below deck in ships, near blasting
operations, in locations where a large volume of dust particles (such as flour, wood
or metal) is present in the air, etc.
We recommend to switch off the device completely. his also applies to places
where you are usually advised to switch off your vehicle motor.
♦Do not operate in close range of strong electromagnetic fields. Failures may be
caused.
♦Interference may be noticed near electric devices. herefore, always pay attention
to local safety regulations.
♦Users with hearings aids must note that radio signals of electronic devices (with
radio equipment) may launch into hearing devices causing an unpleasant noise.
Maintenance, Service and disturbances:
♦he skeye.dart is – apart from charging of battery and the mentioned comments –
lifetime maintenance-free and does not need special care.
♦Do not try to open, repair or modify your skeye.dart. he manufacturer will not be
liable for any damage caused in that way. Apart from other things, the function for
correctly charging the battery may be influenced. As a result, excessive charging
voltage, uncontrolled charging and discharge current, leakage of harmful
substances, excessive heat generation, bursting or fire may occur.
♦Any tampering by non-authorised persons will invalidate the warranty.
♦If your skeye.dart needs to be repaired or maintained, please contact your
specialised dealer.
♦Clean the housing only with damp cloth and mild detergent.
1. .2 Safety Notes for the Lithium-Ion Battery
Carefully read the following safety notes to prevent an incorrect handling of the
battery and to avoid possible dangers.
Non-observance of the safety information or incorrect use of the battery
can lead to excessive current flow, to the discharge of harmful substances,
excessive heat development, explosion or fire.
Transportation and storage:
♦Do not transport or store the battery together with metal objects such as necklaces,
hairpins, etc. Doing so may short circuit the battery, which could result in excessive
current flow and possibly cause leakage of battery fluid, heat generation, bursting
or fire. When carrying or storing batteries, use an electrically nonconductive
(insulated) case.
♦When the equipment is expected not to be used for a long time do not store the
batteries exceeding the appropriate conditions as listed below. Otherwise its
performance will be degraded and its service life will be decreased.
▪when the batteries are discharged and remain in the equipment: 1 week

IN RODUC ION
Safety Notes
26.03.2010 • 1.00 11
▪when the batteries are fully charged and remain in the switched off
equipment: 1 month
▪long-term storage: see next note.
♦When the battery is expected not to be used for a long time, take the battery out of
the equipment and store it in a dry place at or below room temperature. For an
optimum service life, the battery should be charged up to 20 to 40% when being
stored. After 12 months at the latest the device should be charged and
subsequently discharged. Otherwise, its performance will be degenerate and its
service life will be decreased.
♦Switch off the backup battery if you do not use the device for a longer time (see
chapter 3.1)
♦Store the battery in a location where children cannot reach it. Also make sure that a
child does not take out the battery from the charger or equipment being used. If a
child swallows a battery, seek medical attention immediately.
♦he storage temperature must not be below –20 or above +50°C.
Ambient conditions:
♦he temperature may not be outside the admissible operating and storage
temperature range of -20 to +50 degrees centigrade. he temperature may be
within the range of 0 °C to +40 °C during charging.
♦Do not discard the battery into fire and do not leave it in a hot place such as near a
fire or on a heater. Doing so melt the insulation, damage the sealing parts or
protective devices, cause leakage of battery fluid (Electrolyte) from the batteries,
bursting or fire.
♦Do not immerse batteries in water or seawater, and do not allow them to become
wet. Batteries which have become wet must always be replaced with new ones
because internal short-circuits can cause dangerous heat emissions if further used.
♦Do not throw batteries, and do not allow them to fall on hard surfaces.
Connection:
♦Do not connect the battery to an electrical outlet, e.g. vehicle cigarette lighter,
power outlets, other power supply units, other charger, etc.
♦Do not reverse the positive (+) and negative (-) terminals when inserting the
battery. Since the mechanical design of the battery enables you to insert in one
direction only, the battery must not be inserted into the opposite direction by force.
Handling:
♦Protective devices to prevent danger are built into the battery. o ensure for a
proper operation, do not disassemble the battery or modify parts of it. If they are
damaged, this could result in excessive charging voltage, control loss during
charging or discharging, leakage of battery fluid, heat generation, bursting or fire.
♦Do not disassemble Li-ion bare cells of the battery. here is the danger of flammable
fluid being spilt. It may also cause an internal or external short circuit, leakage of
battery fluid, heat generation, bursting or fire.
♦Do not directly solder the battery. Doing so melt the insulation, damage the sealing
parts or protective devices, cause leakage of battery fluid (Electrolyte) from the
batteries, bursting or fire.
♦Do not short-circuit the battery by directly connecting the positive (+) and negative
(-) terminals with objects such as wire. Short circuiting generates heat which may

IN RODUC ION
Safety Notes
12 1.00 • 26.03.2010
damage the equipment. In the worst case this could result in leakage of battery
fluid, bursting or fire.
♦Do not put the battery into a microwave oven or pressurised container. his could
result in leakage of battery fluid, bursting or fire.
♦Do not pierce the battery with a nail or other sharp object, hit it with a hammer, or
step on it. his could result in leakage of battery fluid, bursting or fire.
Operation:
♦For operation of the device use the delivered battery only. Please use the battery
only for the determined purpose.
♦Do not use the battery in any device other than those specified in this manual.
Depending on the device being used, doing so may cause abnormal current flow,
leakage of battery fluid, heat generation, bursting or fire.
♦If the battery becomes discolored or deformed, or in any way appears abnormal,
stop using it. Return it to the distributor or manufacturer from whom you purchased
it.
♦Do not use or leave the battery in very high temperatures (for example, under
strong direct sunlight). Otherwise, it may cause leakage of battery fluid, bursting or
fire or its performance will be degenerate and its service life will be decreased.
♦o ensure safety, the battery incorporates built-in safety devices. Do not use it in a
location where static electricity is greater than what the manufacturer guarantees.
Otherwise, the safety devices may be damaged, causing leakage of battery fluid,
expose of fire.
♦Do not use the battery in other than the following conditions. Otherwise, it can
overheat or fire, or its performance will be degenerate and its service life will be
decreased.
▪when the battery is charged: 0 °C ~ +40 °C
▪when the battery is discharged or stored: -10 °C ~ +50 °C
Note: higher temperatures increase the self-discharge of the battery.
♦Do not use the battery in combination with primary batteries (such as dry-cell
batteries) or batteries of different capacities or brands. hat may cause leakage of
battery fluid, heat generation, bursting or fire.
♦Do not connect different assembled batteries together. And also do not connect
same assembled batteries in series, unless explicitly instructed by the user
information to do so.

IN RODUC ION
Safety Notes
26.03.2010 • 1.00 13
Charging:
♦When recharging, only use the battery charger specially provided by Skeye. Failure
to follow proper charging procedures may cause excessive voltage, excessive
current flow, loss of control during charging, leakage of battery fluid, heat
generation, bursting, or fire.
♦Do not use or charge the battery near a heat source such as fire or heater or in
extremely hot weather.
♦Do not charge a battery when it is cold (below 0 °C). his may cause impaired
performance and shortening of battery service life.
♦If a battery is to be used for the first time or it has not been used for a long time,
be sure to charge it.
Health hazards:
♦If a battery leaks, and the electrolyte enters the eye, do not rub but rinse out
thoroughly under flowing water and then seek medical assistance. Otherwise, eye
damage can result.
♦If a battery leaks and the electrolyte makes contact with clothing or the skin, the
skin or clothing must be rinsed out under flowing water in order to prevent damage
to the skin.
Maintenance, service and disturbances:
♦Lithium-ion batteries have a predetermined operating life. If the operating time
shortens excessively, this means that the battery life has expired. If it comes to
that point, stop use immediately and replace with new batteries.
♦Lithium-ion battery is a designated product of Recycle. he battery after using is a
valuable resource. he return of the batteries ensures reuse of the chemicals
contained. his recycling process avoids any impact to the environment.
Höft & Wessel guarantees that all batteries returned are fed to the recycling
process.
When a battery is no longer usable, discharge it. When you dispose of the Lithium
battery, insulate it by wrapping the terminals with tape. Mixing the battery with
other metals or batteries may lead to fire, heat, or explosion.
hen, return the battery to Höft & Wessel. As a part of its normal service,
Höft & Wessel guarantees that all used batteries are fed to the recycling process.
See also extract from BattV (Decree for the return and disposal of used batteries
and accumulators, Germany) as of 09.09.2001:
„The manufacturers are obliged to take back and reuse toxic containing
batteries according to the regulations and dispose of non-reusable batteries that
have been handed in by distributors (§5) or public disposal departments (§9) “
♦If Lithium-ion batteries are not fully charged after the battery charger’s
predetermined charging period has elapsed, stop the charging process. Prolonged
charging may cause leakage of battery fluid, heat generation or bursting of fire.
♦If the battery leaks or gives off a bad odor, remove it from any exposed flame.
Otherwise, the leaking electrolyte may catch fire, and the battery may explode or
fire.
♦If the battery gives off an odor, generates heat, becomes discolored or deformed, or
in any way appears abnormal during use, recharching or storage, immediately
remove it from the device or battery charger and stop using it.

IN RODUC ION
Safety Notes
14 1.00 • 26.03.2010
♦In case the battery terminals are dirty, clean the terminals with a dry cloth before
use, otherwise, the contact with equipment may cause insufficiency, and power
failure or charge failure.
1. .3 Safety Notes for the Desktop Cradle/Car Charging Cradle
♦he battery may only be charged with the battery charging device recommended by
the manufacturer. he utilisation of another battery charger might be dangerous
and leads to an end of the warranty.
♦Do not try to open, repair or modify your device. he manufacturer will not be liable
for any damage caused in that way. Apart from other things, the function for
correctly charging the battery may be influenced. As a result, excessive charging
voltage, uncontrolled charging and discharge current, leakage of harmful
substances, excessive heat generation, bursting or fire may occur.
♦If the desktop/car charging cradle changes shape or colour, generates heat or in
any way appears abnormal stop using it. Return it to the distributor or manufacturer
from whom you purchased the desktop/car charging cradle.
♦Use the desktop/car charging cradle only with the supplied power supply. he main
voltage must correspond to the technical data mentioned on the power supply.
♦Use the desktop/car charging cradle only in dry, closed rooms and not in direct
sunlight, e.g. behind windows.
♦he device has to be connected to a USB 1.1 or higher interface.
♦Keep the device out of the reach of small children.
1. .4 Safety Notes for the Power Supply
♦Do not try to open and/or repair and/or alter the power supply. he manufacturer
will not be liable for any damage caused in that way.
♦Always connect the power cable into an easy accessible wall outlet.
♦Always connect the power cable to the device before plugging it into the wall outlet.
Make sure that you do not insert the power cord into the headset plug by mistake.
♦Check that the plug is clean before plugging it in.
♦Do not place any objects on top of the cord.
♦Do not place the cord near heating equipment.
♦Do not connect cables other than those specified in this manual. Doing so may
result in fire or improper operation.
♦Do not use a damaged cord.
♦Handle the power cord with care. Improper handling may lead to fire or shock.
♦Avoid excessive bending, twisting, and pulling of the cord.
♦When disconnecting the power cable, hold the plug firmly. Do not tug on the cord
itself.
♦Use power supply and power cable only in dry rooms.

IN RODUC ION
Safety Notes
26.03.2010 • 1.00 15
1. .5 Safety Notes on the Camera/Imager with LED Aimer
If your skeye.dart is equipped with an imager module with integrated LED aimer,
please observe the following notes:
he LED light source is classified as a class 1 LED according to the following
standard: IEC60825-1 ED 1.2:2001.
A class 1 LED is presumed to be safe under reasonably foreseeable conditions of
operation. Even looking directly into the light beam by accident does not do any
harm.
Caution: When changing the settings of the imager/aimer module except for those
described in the user guide the LED radiation may exceed the harmless area of
class 1.
1. .6 Safety Notes on GSM/GPRS/EDGE
A GSM/GPRS communication can be realised via CF or PC card. If your device features
such equipment pay attention to the safety notes.
Radio devices (such as GSM) are subject to certain restrictions when used in
proximity to electronic instruments:
When being in an aircraft completely power off your skeye.dart (see chapter
3.4.2.). Using the skeye.dart in an aircraft interferes with the electronic equipment
on board and might be dangerous. Please follow the instructions of the particular
airline.
♦Switch off your skeye.dart in hospitals or similar places to prevent an interference
with medical devices.
♦Switch off your skeye.dart at places where you are advised to switch off your mobile
phone.
♦he unit may affect heart pacemakers.
he Federal Office for Radiation Protection recommends a distance of no less than
20 cm between a mobile phone and a heart pacemaker to ensure no interference
takes place. his recommendation is also in line with studies and recommendations
issued by independent institutes.
Users with heart pacemakers must ensure a distance of at least 20 cm between the
skeye.dart and the heart pacemaker.
♦he unit may affect hearing aids.
♦Interference may be noticed in close proximity to televisions, radios, PCs.

IN RODUC ION
Disposal
16 1.00 • 26.03.2010
1. . Safety Notes on Wireless LAN/Bluetooth
A Wireless LAN- or Bluetooth-communication can be realised using an integrated
module. If your skeye.dart is equipped with a WiFI-/Bluetooth-module, please pay
attention to the safety notes.
Radio facilities – as well as Wireless LAN and Bluetooth - are subject to certain
restrictions during use near electronical devices. In this connection please read the
safety notes of the previous chapter.
Wireless LAN data communication and Bluetooth can be easily intercepted and
recorded. Secure your network against unauthorised intrusion into the WLAN. We
recommend that you consult a specialist (e.g. a system house).
1. .8 Safety Notes on Data Loss
♦It is very much recommended that all important data be backed up as durable
hardcopy. It is very much recommended to store all recorded data to flash disk and
to regularly back up the data on an external medium. Given certain conditions, loss
or modification of data can occur in practically any electronic storage system.
herefore, we do not accept any liability for loss of data or data being otherwise
rendered unusable following incorrect use, repairs, faults, battery problems,
software errors or for any other reason.
We shall not be held liable either directly or indirectly for any financial loss or third
party compensation claims which arise on foot of the use of this product and all and
any of its functions, such as stolen credit card numbers, loss or modification of data,
etc.
1.8 Disposal
he skeye.dart is not intended for use in private households. he device must not
be disposed of via a public waste disposal system. For disposal, return the device to
the Höft & Wessel AG.

IN RODUC ION
Explanations on this Manual
26.03.2010 • 1.00 1
1.9 Explanations on this Manual
he User Manual is designed to enable you to get your skeye.dart up and running
quickly and is structured as follows:
♦Introduction
♦aking into operation
♦Software
♦Communication/Data exchange
♦echnical Data
♦roubleshooting
It is assumed that your are familiar with Microsoft Windows 2000, Windows XP,
Windows Vista or Windows 7.
In case of problems refer to the corresponding Microsoft documentation.
1.9.1 Note Pictograms
Safety notes in the text are always illustrated in the same way.
In this manual three different safety notes are used.
NOTE!
A note points out tips on simplified use of the system / device for example by
describing a simplified workflow using a certain tool.
CAUTION!
A CAUTION warning sign points out potential dangers relating to the equipment
(i.e. short circuit) or loss of data.
WARNING!
The WARNING sign draws the user's attention to potential dangers that could
be harmful to the health/life of the user (i.e. electric shock) or seriously
damage the equipment (the equipment could be destroyed).
Indicates an alternative method to complete a task or additional information on a topic.

IN RODUC ION
Explanations on this Manual
18 1.00 • 26.03.2010
1.9.2 Registered Trademark
he following terms and names used in this manual are registered trademarks and
products of the corresponding companies:
•Microsoft
®
, Windows
®
, Windows N
®
, Windows
XP
, Windows CE
®
, Windows
CE.NE
®
, Windows® Embedded CE 6.0, Windows Mobile 6.5 and
ActiveSync
®
are registered trademarks of the Microsoft Corporation, USA.
•Other product and company names may be trademarks of other companies.
All trademarks mentioned and possibly protected by third parties are subjected to
the ownership of the corresponding registered owners.

SKEYE.DAR
Accessories
26.03.2010 • 1.00 19
2. skeye.dart
2.1 Accessories
•Battery
•Power supply unit
2.2 Desktop Cradle
•Desktop Cradle HW 50240 USB (Standard)
(including power supply unit and USB cable)
2.3 Hardware Equipment
•Integrated camera
•Integrated Wireless LAN module, 802.11 b/g
•Bluetooth
•different memory capacities available
•SIM card slot (lockable to prevent unauthorised card removal)
•MicroSD card slot (lockable to prevent unauthorised card removal)
•GSM/GPRS/EDGE module
•GPS module
2.4 Views
2.4.1 Front View
Fig. 1: Front view
Loud speaker
LEDs
Camera
Scanner
button
Scanner button
Scanner button
Enter key
Function key 1
Key lock
Microphone
Standby (press about 5 s)
Power
-
on button
Show/Hide
touch keypad
4 cursor
keys

SKEYE.DAR
LED Function Displays
20 1.00 • 26.03.2010
2.4.2 Side View
Fig. 2: lower side Fig. 3: upper side
2.4.3 Rear View
Fig. 4: Rear view
2.5 LED Function Displays
here are two modes:
•skeye.dart inserted in desktop cradle: the LED of the skeye.dart is
ored = battery is charging
ogreen = battery fully charged
•skeye.dart is mobile: can be operated by the application
Stylus
Battery locking
Loud speaker
Chargi
ng contacts
Reset
pushbutton
Power supply
unit
connection
Headset
connection
System
interface
Camera
DC
GND
1
-
Wire
Battery compartment
(can be screwed)
With screw
Microstix 3 wing FPHM2-0,4x6
Skeye Order No. 112218