Mango X- series User manual

Main Unit

BEFORE GETTING STARTED

The Handheld Experts!

#1 in Route Delivery Software!

Advantage Route Systems, Inc. - 3201 Liberty Square Parkway Turlock, CA 95380 USA - 1.209.632.1122 - Toll Free (USA) 888.294.7688 - www.AdvantageRoute.com - [email protected]

Getting Started Guide

2. Installing the Baery Pack

1) Using the supplied screw driver, unscrew the six screws

on the back cover.

2) Insert baery with the arrows visibile and poinng down

towards the boom of the handheld.

3) Replace back cover and be sure to ghten the screws ﬁrmly -

but not too ght. Note: If you do not see the baery in your

package materials, then your baery has already been installed

into your device.

3. Connecng the Power Adapter to Charge the Handheld

1) Connect the USB power cable to the AC or DC power

adapter with the larger connector.

2) Insert power adapter into either an AC/DC outlet.

3) Gently open the cover to the USB port on the right side of

the handheld. Insert the smaller end of the power cord

into the USB port.

AC Adapter (Oponal)

Wireless Charging

Standard Baery

1. Open the package and check your accessories.

USB CableEarphones

DC Adapter

Screwdriver

Antenna (RX only)

OVERVIEW

Power On/Oﬀ

Baery Cover Indentaon

Rear Facing

Camera

Speaker

Ear phone

Jack Connector

Volume Control

Walkie Talkie

Front Facing

Camera

USING PERIPHERALS

Pung in the SIM/SD Card

1) Turn oﬀ device, remove back cover, and

remove baery.

2) Insert a correctly oriented SIM card, metal side

down. You can use either slot for the SIM card.

3) If you would like to use an SD card for external

storage, insert the card into the provided slot.

4) Replace baery.

5) Put the baery cover back in place

Note: Never remove the SIM/SD card when an

external power supply is connected. This may

cause damage to the card or to your phone.

SIM #2 (Micro)

SIM #1 (Micro)

Micro SD Card

Advantage Route Systems, Inc. - 3201 Liberty Square Parkway Turlock, CA 95380 USA - 1.209.632.1122 - Toll Free (USA) 888.294.7688 - www.AdvantageRoute.com - [email protected]

Emergency

Flashlight

USB Port

Reset

Camera

2) Navigate to the Sengs icon from the main screen.

3) Move the Wi-Fi slider to the “on” posion (to the right).

4) Select “Wi-Fi” and then select your access point.

5) Enter the security key for your connecon (if secured).

1) Navigate back to the Sengs screen select and slide the

Bluetooth slider to the ”on” posion (to the right)

2) Under “Available Devices”, choose your printer.

4) Enter your device’s PIN. The PIN will either be 1234 or 0000.

SETTING UP YOUR DEVICE

INSTALLING THE APPLICATION

3) If you are not sure which listed device is your printer,

print a test page to get the info. You can do this by turning

the printer OFF, then hold down the feed buon and turn

the printer ON. Once it is on, let go of the Feed buon and

the test page will print. Generally the name or model number

will be near the top.

1) When asked if you would like to install this applicaon, select “Next”

3) When asked if you would like to download data from your server,

select “Yes”

4) Enter your server informaon. For assistance, contact Advantage Route

Systems at the phone number below.

3. Security

1) Navigate back to the Sengs icon and access the

Security icon

2) Slide “Unknown Sources” slider to “on” posion

This step is necessary in order to allow you to receive

updates from Route Manager, as these updates are not

available in your Google Play Store.

2) Select Install then “open”

Note: You will need to complete these steps if you are

using a Bluetooth printer such as the PTB2/3 or BT4.

2. Seng Up Bluetooth

1. Seng Up Wi-Fi

Advantage Route Systems, Inc. - 3201 Liberty Square Parkway Turlock, CA 95380 USA - 1.209.632.1122 - Toll Free (USA) 888.294.7688 - www.AdvantageRoute.com - [email protected]

1) Turn the power on to your device.

1. Download

1) Open a new web browser

2) Type your download server into the web addres bar

3) The download screen will appear and show progress of

download. Wait unl complete.

RMA Server: sh003.ars247.com:46001

RM2000 Server: sh003.ars247.com:46101

2. Install

All devices purchased through Advantage Route Systems will have already

completed the steps below.

Advantage Route Systems of Turlock, California, USA is a

global distributor of route automa on solu ons. Since

1994, ARS has been the leader in route accoun ng,

handhelds, GPS and other applied technologies for Bo led

Water, Water Treatment, Ice, Propane, Oil Recycling and

many more industries. With an installed base of over 5,000

routes in 45 countries, ARS consistently brings quality

products to the market for progressive companies. Its 24 X

7 world-wide customer service center is second to none.

lob

out

rod

Dec 2014

1) Never use strong pressure on the screen or subject it to severe

impact, as the LCD panel can crack and possibly cause personal injury.

If the LCD panel is broken, never touch the liquid inside, because the

liquid irritates the skin.

2) Use only the original approved AC adapter with the device. Use of an

unapproved AC Adapter could result in electrical problems,or even

cause are or electrical shock to the user.

3) Do not disassemble the handheld. Servicing should be done by

Authorized Suppliers only. If the device or accessories are damaged

due to improper handling, unauthorized repair or warranty seals

are broken, the warranty will be void.

4) Make regularly back-ups of all important data.

5) Under no circumstance will the Manufacturer (or its agents) be liable

for any direct, indirect, consequen al or incidental damages arising

from the use or inability to use both the hardware and so ware

and/or any data loss, even if the Manufacturer (or its agents) has been

informed about the possibility of such damages.

WPP

Do not throw this product in the home waste bin. For proper end-of-life treatment consult the

Environmental care secon of p:// p.sccltd.com.tw

For CE, FCC and other DoC's, consult the Regulatory secon of p:// p.sccltd.com.tw

This device complies With part 15 of the FCC rule Opera on is subject to the following two

condions. (1)This device may not cause harmful interference. (2)This device must accept any

interference received. Including interference that may cause undesired operaon. Complies with 21

CFR 1040.10 and 1040.11 except for devia ons pursuant to Laser No ce No. 50, Date June 24 2007.

Lithium-ion battery packs may get hot, explode, ignite and/or

cause serious injury in case of misuse. Please follow the safety

warnings listed below:

1) Do not throw the battery into ﬁre. Do not expose the

battery to high temperatures.

2) Do not connect the positve battery pack with negatve

battery pack to each other with any metal object (like wire).

3) Do not carry or store battery pack together with metal

objects.

4) Do not pierce the battery pack with nails or drills, strike the

battery pack with a hammer, step on the battery pack or

otherwise expose it to strong impacts, shocks or excessive

force.

5) Do not expose battery pack to liquid or allow the battery

contacts to get wet.

6) Do not disassemble or modify the battery pack. The battery

pack contains safety and protec!on measures, which, if

damaged, may cause the battery pack to generate heat,

explode or ignite.

7) Do not discharge the batteries outside the handheld. Do

not use the battery in a device other than the hanheld or

series battery chargers because the battery pack can become

damaged, and the life expectancy reduced. If the device

causes any abnormal current to ﬂow, it may cause the battery

pack to become hot, explode or ignite and cause serious

injury.

8) In the event the battery pack leaks and the ﬂuid gets into

one's eye, do not rub the eye. Rinse well with water and

immediately seek medical care. If let untreated,the battery

ﬂuid could cause damage to the eye.

BATTERY PRODUCT SAFETY USER AND PRODUCT SAFETY

The Handheld Experts!

#1 in Route Delivery Software!

Advantage Route Systems, Inc. - 3201 Liberty Square Parkway Turlock, CA 95380 USA - 1.209.632.1122 - Toll Free (USA) 888.294.7688 - www.AdvantageRoute.com - [email protected]

The device will be powered

on when you install the

baery pack. Charge the

baery for at least 4 hours.

Do not turn on the device for

the ﬁrst me unl the baery

is charged for at least 4

hours. Always charge the

baeries in a

6C-40C

(32F-104F) environment

temperature.