Skipper XS Instruction Manual

Usage guidelines
Made in the UK

The Skipper XS suction pad holder/receiver
Handle
Opens out fully to
release suction cup. Suction cup
Creates a vacum to
secure in place.
1 3 3
With the handle fully
open, press firmly to
glass or a high gloss
surface and then
close the handle until
it clicks into place
Then simply attach
either a Skipper XS
unit, or any Skipper
tape end by clicking
into place
To remove, fully
open the handle and
pull away from the
surface by peeling
from the lip
IMPORTANT NOTICE: Always fully open the handle and pull from the lip to
remove safely. Do not attach to painted walls as this could cause damage
Lip
Pull from here to safely
and easily remove from
surfaces after use.
Holds XS unit
Simply clip in the XS unit.
Receives tape end
Clip in the tape end clip.
2