VERSA-BRELLA SETUP
ATTACHING THE CLAMP
1– Remove Versa-Brella from the carry bag. The umbrella should remain closed until securely attached.
2– Versa-Brella will attach to either rounded or squared surfaces up to 1.5” diameter. Prior to attaching,
fully open the clamp by twisting the adjustment knob counter-clockwise.
3– Attach the clamp to the desired location and tighten by twisting the knob clockwise. It is recommended
that the area under the clamp be clear of excess debris and moisture to ensure a secure fit.
4– Once in place, detach the ties around the umbrella, push the umbrella up and open. Versa-Brella is now
ready for use.
ADJUSTING BASE HINGES
1– The umbrella can be adjusted forward and backward and/or left and right by pressing one or both of
the Base Hinges (C). To adjust, press the Base Hinge button, move the umbrella into place and then
release to lock.
NOTE: Umbrella will snap to the closest setting.
TOP HINGE & ROTATING THE CANOPY
1– To adjust the umbrella forward or backward 180 degrees, press the Top Hinge button (B). Move the
umbrella into place and release to lock.
2– To rotate the Canopy (A), grab the canopy tip and rotate the canopy to desired position. The canopy
shaft will rotate in the stationary collar.
NOTE: Do not attempt to twist the stationary collar.
STORAGE
1– Make sure the umbrella is dry and free of debris before storing.
2– Straighten the umbrella pole with the top hinge. Close the
umbrella and secure with the ties.
3– Slide contents into the carry bag.
B
C
C
STATIONARY
COLLAR
Register your product at Sport-Brella.com to ensure warranty coverage,
get new product information and special deals from Sport-Brella®.
or call toll free: 877-225-7275
Made in China. ©2015 Pro Performance Sports, LLC. All rights reserved.
U.S. Patent # D627,148 & D646,886. Other U.S. and foreign patent
applications are pending.
Manufactured and distributed by SKLZ/Pro Performance Sports: 2081
Faraday Avenue, Carlsbad, CA 92008 U.S.A. SKLZ, and Sport-Brella®are
registered trademark of Pro Performance Sports, LLC., its subsidiaries
and affiliates. Product features, appearance, and specifications may be
subject to change without notice. Unauthorized duplication is a violation
of applicable local and international laws.
V3
1-YEAR LIMITED WARRANTY – VERSA-BRELLA
VersaBrella_Instr_8_5x11_V3.indd 2 11/24/15 3:24 PM