SKLZ QUICKSTER Manual

Includes:
» 5' x 5' Quickster Net
» Removable Pitching Target
» Removable Ball Collection Skirt
» Carry Bag
» 4 Ground Stakes
SET-UP INSTRUCTIONS

SKLZ.com
QUICKSTER™ NET IS PERFECT FOR:
» BASEBALL » SOFTBALL » FOOTBALL » SOCCER » LACROSSE
A – Net B – Base Frame
C – Tension-Tite™Arm Pole (2)
F – Removable Ball Collection Skirt
D – Ground
Stakes (4)
E – Removable
Pitching Target Removable Ball Collection Skirt (F)
Net (A)
Removable
Pitching Target (E)
Tension-Tite™Arm Pole (C)
Base Frame (B)
WARNING: PLEASE READ!
Quickster™is under tension when assembled. Please take the utmost care when releasing
the tension during disassembly. Failure to do so may result in injury.
BEFORE YOU BEGIN:
» Adult assembly recommended.
» Make sure you have all of the Quickster components. Please contact SKLZ customer service
toll free at 877-225-7275 if you are missing anything.
» Read all setup and usage instructions carefully.
» When done, disassemble Quickster and store after use. Do not leave Quickster outdoors.
» Do not climb or hang on the Quickster.
» Regularly check for wear and tear. Stop using goal if any part of it breaks. Failure to do so
could result in injury.
» Keep away from fire and heat sources.
» Not suitable for children under 3 years of age.
QUICKSTER PARTS:

SKLZ.com
STEP 3– ATTACH BALL COLLECTION SKIRT (optional)
Unroll Ball Collection Skirt (F) and velcro to the base of the Quickster Net.
STEP 4–ATTACH PITCHING TARGET (optional)
Unfold the Target (E) and find the top straps (these have adjustment buckles on them). Attach
hook of the top strap through the loop ring of the metal pin at the top of the Tension-Tite
pole, repeat on the other side. Take one of the bottom straps of the target and hook through
fabric loop on the bottom corner of the net, repeat on the other side.
STEP 5–SECURE THE QUICKSTER™TO THE GROUND
Place Quickster in the desired location and ensure it is on
level ground. Secure frame with included Ground Stakes.
Ground Stakes can be secured with hand, foot or mallet.
NOTE: Do not use Ground Stakes on the back of the base
frame. Poles will bend and tension system will not
function properly.
NOTE: Care should be taken when pressing in the ground
stakes. Poles can be bent if driven too far into the
ground or hard surface.
CAUTION: Make sure the Quickster is secured into the
ground before play. During play make sure that
the Ground Stakes are secured regularly as a
loose Ground Stake may cause injury.
QUICKSTER™ ASSEMBLY:
STEP 1–BASE FRAME AND TENSION-TITE™ ARM POLE ASSEMBLY
NOTE: Base Frame and Tension-Tite arm poles come pre-attached by elastic.
Layout one Tension-Tite Arm Pole (C) and link
together to form a straight pole. Repeat with second
Tension-Tite Arm Pole. Layout Base Frame (B) and
link the frame together. Make sure to secure the
poles with the push buttons.
NOTE: The slight bowing on the Base Frame is part
of the Tension-Tite system design.
Slide the Tension-Tite Arm Poles into each side of
the Base Frame.
NOTE: Ensure arm poles are fully inserted. Failure to
do so may result in damage to the Quickster.
STEP 2–CONNECT THE NET TO THE FRAME
Unfold the Net (A) and slide the metal pin at the top of the net into the top of the
Tension-Tite Arm Pole. Make sure that the Quickster logo on the net is facing away from the
frame. Repeat on the other side.
Lift up the base pole to connect the grommets on the bottom of the net to each side of the
frame.
NOTE: Check the frame to make sure it is securely and fully assembled with the net before
securing to the ground.
B
Push Button Attachment
C
C
1.
Grommet attachment
2.
1.
1.
2.
2.
Top Attachment Bottom Attachment
ONLY secure stakes where
indicated above.
SIDE

PERFECT FOR PRACTICE WITH:
STORING YOUR QUICKSTER™:
Remove the Pitching Target and Ball Collection Skirt (if using) fold up and place into the carry
bag. Remove the Ground Stakes and place them into the carry bag.
WARNING: Quickster is under tension when assembled. Please take the utmost care when
releasing the tension during disassembly. Failure to do so may result in injury.
Hold one pin in one hand and one Tension-Tite™ Arm Pole in the other while pulling the pin
out. Repeat on the other side. Remove the Net grommets from each side of the frame. If
needed, air dry the net before you fold and place it into the carry bag.
Pull the Tension-Tite™Arm Poles out of each side of the base frame and unlink and fold them
down to store.
NOTE: Store Tension-Tite™Arm Pole in the carry bag with the round tops facing away from
each other.
Unlock the push buttons on the Base Frame to unlink the frame. Fold and store in carry bag.
Auto-feed gravity drop Rebounder for tee
simulation
Rebounder for angled
soft toss
Rebounder for angled
turnaround double play
» Auto-feeds 12 baseballs or 8 softballs every
6, 8 and 10 seconds for quick hands and
reaction training
» Use with practice or regulation balls
» The ultimate system for developing fast hands,
sharp reaction times, and solid mechanics
» Four configurations: Auto-feed gravity drop,
rebounder for tee hitting, rebounder angled
for soft toss and rebounder angled for turn
around double play
» Standard tee with brush top and height adjustment
» Positions for 5 different zones across the plate
» Helps build confidence and hand-eye coordination
in youth players
» 15” base, with telescoping tee arm
» Brush top provides more realistic ball flight, feel
and feedback — get cleanly through the ball
without any shock to the bat or hands
» Sets up quickly and easily
TRUE-FLIGHT ULTRA-DURABLE BATTING TRAINER
4-WAY GRAVITY-DROP AND REBOUNDER SYSTEM

90-DAY LIMITED WARRANTY – QUICKSTER™
Pro Performance Sports (PPS) warrants to the original consumer purchaser of any PPS product it manufactures that the product
will be free of defects in materials or workmanship for 90 days (unless specified in alternate warranties) from the date of purchase.
If defective, and purchased from a retail store, return the product along with receipt to the retail store where the product was
purchased. If the item was purchased from PPS, return the product along with proof of the date of purchase (i.e. the packing slip),
postage prepaid to the address below for replacement consideration:
Pro Performance Sports :: 5823 Newton Drive :: Carlsbad, CA 92008 :: Attn: Returns
This warranty does not cover damages resulting from accident, misuse, abuse or lost merchandise. Only valid in the USA. All
returns sent to PPS require a Return Merchandise Authorization number (RMA). For returns to PPS and for all other Customer
Service inquiries, please call toll free: 1-877-225-7275
Register your product at SKLZ.com to ensure warranty coverage, get new
product information and special deals from SKLZ
DO YOU HAVE A WINNING SPORTS PRODUCT OR IDEA?
Visit our website to learn how to submit a product application for consideration.
It may become our next winning product!
SKLZ.com
Made in China
©2012 Pro Performance Sports.
All rights reserved.
Unauthorized duplication is
a violation of applicable laws.
U.S. and Foreign Patents Pending.
VIDEOS
SKLZ.com
Like us on Facebook:
facebook.com/SKLZfans
Follow us on Twitter:
@teamSKLZ