Skoda 2000 Fabia Instruction manual

Service 5
Service Department. Technical Information Printed in Czech Republic
S00.5319.00.20
Workshop Manual
FABIA 2000 ³
Body Work
Edition 08.99

Service
5
The Workshop Manual is intended only for use within the Organisation Škoda.
It is not permitted to pass it on to other persons.
© ŠKODA AUTO a. s.
Printed in Czech Republic
S00.5319.00.20

FABIA 2000 ³Body Work
List of SupplementsEdition 01.05
S00.5319.15.20
List of Supplements to Workshop Manual
FABIA 2000 ³
Body Work
Edition 08.99
Supple-
ment Edition Subject Article Number
08.99 Basic Edition S00.5319.00.20
1 11.99 Supplement to Basic Edition S00.5319.01.20
2 12.99 Self-diagnosis for convenience system S00.5319.02.20
3 03.00 Final diagnosis for airbag S00.5319.03.20
4 06.00 Supplement to Rep. - Gr. 50 - 70 S00.5319.04.20
5 07.00 Supplement to Rep. - Gr. 01 - 74 S00.5319.05.20
6 11.00 Supplement to Rep. - Gr. 01 - 70 S00.5319.06.20
7 04.01 Supplement to Rep. - Gr. 01 - 74 S00.5319.07.20
8 08.01 Supplement to Rep. - Gr. 01 and 64 S00.5319.08.20
9 02.02 Fabia Praktik S00.5319.09.20
10 03.02 Supplement to Rep. - Gr. 70 and 72 S00.5319.10.20
11 07.02 Supplement to Rep. - Gr. 01 - 70 S00.5319.11.20
12 05.03 Supplement to Rep. - Gr. 70 S00.5319.12.20
13 10.03 Supplement to Rep. - Gr. 01 - 70 S00.5319.13.20
14 04.04 Supplement to Rep. - Gr. 01, 57, 58 and 69 S00.5319.14.20
15 01.05 Self-diagnosis for convenience system with LIN databus cable
and Supplement to Rep. - Gr. 55, 57, 58, 63, 68, 69 and 70 S00.5319.15.20

FABIA 2000 ³Body Work
List of Supplements Edition 01.05
S00.5319.15.20

FABIA 2000 ³Body Work
Table of ContentsEdition 01.05
S00.5319.15.20 I
Table of Contents
00 – Technical Data
Technical Data ..........................................................................................
- Vehicle identification data ............................................................................
01 – Self-diagnosis
Self-diagnosis for convenience system ...........................................................
- Notesconcerning self-diagnosis for conveniencesystem ......................................
- Typesanddescription of convenience system ...................................................
- Overview of theselectablefunctionsofthe diagnosis fortheconvenience system ........
- Connectvehiclesystem tester -V.A.G1552- ......................................................
- Interrogating control unitversion ....................................................................
- Interrogating faultmemory ...........................................................................
- Actuator diagnosis .....................................................................................
- Erasing faultmemory .................................................................................
- Endingoutput ..........................................................................................
- Codingcontrolunit ....................................................................................
Self-diagnosis for convenience system with CAN databus cable ..........................
- Overview of the selectable functions of the self diagnosis for convenience system with CAN
databus cable ..........................................................................................
- Overview of thecontrol unitsforconveniencesystem withCANdatabuscable ............
- Codingcontrolunit withCANdatabuscable ......................................................
- Faulttable ConveniencesystemwithCANdatabuscable ......................................
- Readingmeasuredvalueblock for conveniencesystem withCANdatabuscable .........
- Testtablefor conveniencesystem withCANdatabuscable ...................................
Self-diagnosis for convenience system with LIN databus cable ............................
- Overview of the selectable functions of the self-diagnosis for convenience system with LIN
databus cable ..........................................................................................
- Overview of thecontrol unitsforconveniencesystem withLINdatabuscable ..............
- Codingcontrolunit withLINdatabuscoding ......................................................
- Faulttable of control unitforconvenience systemwith LINdatabus cable ..................
- Faulttable of LIN databus/controlunits for window control inthe individualdoors .........
- Readingmeasuredvalueblock withLINdatabus cable .........................................
- TesttablewithLINdatabus cable ..................................................................
Adapting the convenience system ( for all convenience system types) ..................
- Adjustment ..............................................................................................
Self-diagnosis for Airbag System I .................................................................
- Function of the airbag system .......................................................................
- Connectvehiclesystemtester -V.A.G1552- andselect address word„Airbag“ ............
- Overview of selectablefunctions ....................................................................
- Interrogating control unitversion ....................................................................
- Interrogating faultmemory ...........................................................................
- Actuator diagnosis .....................................................................................
- Erasing faultmemory .................................................................................
- Endingoutput ..........................................................................................
- Codingairbagcontrolunit ............................................................................
Self-diagnosis for airbag system II .................................................................
00-1 page 1
00-1 page 1
01-1 page 1
01-1 page 1
01-1 page 1
01-1 page 3
01-1 page 4
01-1 page 5
01-1 page 6
01-1 page 6
01-1 page 7
01-1 page 8
01-1 page 8
01-2 page 1
01-2 page 1
01-2 page 1
01-2 page 3
01-2 page 4
01-2 page 15
01-2 page 16
01-3 page 1
01-3 page 1
01-3 page 1
01-3 page 2
01-3 page 2
01-3 page 7
01-3 page 10
01-3 page 10
01-4 page 1
01-4 page 1
01-5 page 1
01-5 page 1
01-5 page 3
01-5 page 4
01-5 page 5
01-5 page 6
01-5 page 6
01-5 page 7
01-5 page 8
01-5 page 8
01-6 page 1

FABIA 2000 ³Body Work
Table of Contents Edition 01.05
S00.5319.15.20
II
- Faulttable ..............................................................................................
- Readingmeasuredvalueblock .....................................................................
- Test table ...............................................................................................
- Partsinspectionwithtestbox-VAS 5056- ........................................................
Deactivating and activating airbag units (adaptation) .........................................
- Deactivatingand activatingpassenger-sideairbag units(adaptation) ........................
50 – Front body
Front body ...............................................................................................
- Removingand installinglock carrierwithcomponentparts ....................................
Front wing ...............................................................................................
- Removingand installingthefrontwing ............................................................
55 – Bonnet, tailgate
Front bonnet .............................................................................................
- Summaryoffrontbonnet components .............................................................
- Summary of radiator grill components .............................................................
- Disassemblingand assembling radiatorgrill ......................................................
- Adjusting frontbonnet ................................................................................
Tailgate ...................................................................................................
- Removingthe pressurizedgasstrut ................................................................
- Degassing the pressurizedgas strut ...............................................................
- Summaryofcomponents of tailgate lock ..........................................................
- Summaryofcomponents of remoterelease ......................................................
- Removingand installingluggagecompartmentlid hinges(Sedan) ...........................
- Adjusting luggage compartmentlid .................................................................
Fuel-tank lid unit .......................................................................................
- Summaryofcomponents of the fuel-tanklidunit .................................................
57 – Front doors/door internal parts/central locking
Front door ................................................................................................
- Summaryofcomponents ............................................................................
- Removingand installingthedoor ...................................................................
- Door adjustment .......................................................................................
- Removingand installingassemblycarrier .........................................................
- Removingand installingdoorwindow ..............................................................
- Removingand installingwindow lifter motor ......................................................
- Summaryofcomponents of doorhandle and doorlock .........................................
- Removingand installingthelock cylinder housing ...............................................
- Removingand installingthedoor handle ..........................................................
- Removingand installingthedoor lock .............................................................
- Removingand installingthelockingbuttonforlockingrod .....................................
- Summaryofcomponents of frontdoor seals ......................................................
- Centrallockingsystem ...............................................................................
58 – Rear doors/door internal parts
Rear door .................................................................................................
- Summaryofcomponents ............................................................................
- Removingand installingthedoor ...................................................................
01-6 page 2
01-6 page 6
01-6 page 7
01-6 page 13
01-7 page 1
01-7 page 1
50-1 page 1
50-1 page 1
50-2 page 1
50-2 page 1
55-1 page 1
55-1 page 1
55-1 page 2
55-1 page 2
55-1 page 3
55-2 page 1
55-2 page 1
55-2 page 1
55-2 page 2
55-2 page 3
55-2 page 3
55-2 page 4
55-3 page 1
55-3 page 1
57-1 page 1
57-1 page 1
57-1 page 2
57-1 page 2
57-1 page 2
57-1 page 4
57-1 page 4
57-1 page 5
57-1 page 5
57-1 page 6
57-1 page 7
57-1 page 9
57-1 page 10
57-1 page 10
58-1 page 1
58-1 page 1
58-1 page 2

FABIA 2000 ³Body Work
Table of ContentsEdition 01.05
S00.5319.15.20 III
- Dooradjustment .......................................................................................
- Summaryofcomponents of doorhandle anddoorlock .........................................
- Removing and installing the door handle ..........................................................
- Removing and installing the door lock .............................................................
- Removing and installing assembly carrier .........................................................
- Removing and installing door window ..............................................................
- Summaryofcomponents of doorseals ............................................................
Rear door (Praktik) .....................................................................................
- Reardoor .................................................................Summaryofcomponents
- Removing and installing the door lock .............................................................
60 – Sliding/tilting roof
Sliding/tilting roof with glass panel ................................................................
- Summaryofcomponents of sliding/tiltingroof withglasspanel ................................
- Removing and installing the glass roof .............................................................
- Removing and installing sun screen ................................................................
- Removing and installing E-drive ....................................................................
- Setting E-drive(0position) ...........................................................................
- Adapting drive ..........................................................................................
- Inspectingparellelrun ................................................................................
- Setting parallel run ....................................................................................
- Removing and installing assembly unit ............................................................
- Cleaning thewaterdrain hoses .....................................................................
63 – Bumpers
Front bumper ............................................................................................
- Summaryofcomponents on thefrontbumper ....................................................
- Summaryofcomponents on thefrontbumper(RS) .............................................
- Removing and installing the bumper bracket .....................................................
Rear bumper .............................................................................................
- Summaryofcomponents of rearbumper ..........................................................
- Removing and installing the bumper bracket .....................................................
- Removing and installing rear apron (RS) ..........................................................
64 – Glazing
Glued windows .........................................................................................
- Removing and installing glued windows ...........................................................
- Removing and installing side window (Combi) ....................................................
- Preparenew windscreenforfitting ..................................................................
- Prepareflangeforfitting ..............................................................................
- Glueing ..................................................................................................
- Waitingtime ............................................................................................
- Eliminatingpaintdamage ............................................................................
- Removeglue and clean ..............................................................................
66 – Exterior equipment
Wheelhouse liner .......................................................................................
- Removing and installing the front wheelhouse liner ..............................................
- Removing and installing the rear wheelhouse liner ..............................................
58-1 page 2
58-1 page 3
58-1 page 3
58-1 page 5
58-1 page 6
58-1 page 7
58-1 page 8
58-2 page 1
58-2 page 1
58-2 page 2
60-1 page 1
60-1 page 1
60-1 page 1
60-1 page 6
60-1 page 6
60-1 page 7
60-1 page 8
60-1 page 8
60-1 page 8
60-1 page 9
60-1 page 9
63-1 page 1
63-1 page 1
63-1 page 2
63-1 page 3
63-2 page 1
63-2 page 1
63-2 page 2
63-2 page 2
64-1 page 1
64-1 page 1
64-1 page 7
64-1 page 8
64-1 page 9
64-1 page 10
64-1 page 11
64-1 page 11
64-1 page 11
66-1 page 1
66-1 page 1
66-1 page 1

FABIA 2000 ³Body Work
Table of Contents Edition 01.05
S00.5319.15.20
IV
Rear-view mirror ........................................................................................
- Summaryofcomponents of rear-view mirror .....................................................
Water box cover ........................................................................................
- Removingand installingwater boxcover ..........................................................
Roof drip moulding ....................................................................................
- Removingand installingroofdripmoulding .......................................................
Protective strips ........................................................................................
- Removingand installingprotective sidestrips ....................................................
Trailer coupling .........................................................................................
- Summaryofcomponents trailer coupling ..........................................................
Roof railing (Combi) ...................................................................................
- Removingand installingtheroof rack ..............................................................
Rear spoiler ..............................................................................................
- Summaryofthecomponents - for thecompleterearspoiler(Combi) ........................
- Removingand installingrearspoilercompletely (Combi) .......................................
- Summaryofthecomponents - for thecompleterearspoiler(RS) ............................
- Removingand installingrearspoilercompletely (RS) ...........................................
Decorative strips (Combi) ............................................................................
- Removingand installingdecorative strips .........................................................
68 – Interior equipment
Interior rear-view mirror ..............................................................................
- Removinginterior rear-viewmirror .................................................................
- Installingrear-viewmirror ............................................................................
- Repairmethodwithglass-metal adhesive .........................................................
Covers, storage areas and trim panels ...........................................................
- Summaryofcomponents of centreconsole .......................................................
- Removingand installingthefrontcanholder .....................................................
- Removingand installingthesunvisor .............................................................
- Removingand installingthecentresunvisor .....................................................
- Removingand installingthestoragearea (Praktik) ..............................................
- Removingand installingthemouldedheadliner(Praktik) .......................................
Recessed handle .......................................................................................
- Removingand installingrecessedhandle .........................................................
Partition panel and protective grating (Praktik) .................................................
- Summaryofcomponents for thepartitionpanel ..................................................
- Removingand installingtheprotective grating for thetailgate .................................
Floor partition (Praktik) ...............................................................................
- Removingand installingthefrontfloor partition ..................................................
- Removingand installingtherear floorpartition ...................................................
Front entrance plates (RS) ...........................................................................
- Removingand installingthefrontentranceplates ...............................................
69 – Occupant protection
Seat belts .................................................................................................
- Safetyinstructionsforwork on seatbelttensioners .............................................
- Summaryofcomponents of frontseatbelts ......................................................
66-2 page 1
66-2 page 1
66-3 page 1
66-3 page 1
66-4 page 1
66-4 page 1
66-5 page 1
66-5 page 1
66-6 page 1
66-6 page 1
66-7 page 1
66-7 page 1
66-8 page 1
66-8 page 1
66-8 page 1
66-8 page 1
66-8 page 2
66-9 page 1
66-9 page 1
68-1 page 1
68-1 page 1
68-1 page 1
68-1 page 1
68-2 page 1
68-2 page 1
68-2 page 2
68-2 page 2
68-2 page 2
68-2 page 2
68-2 page 3
68-3 page 1
68-3 page 1
68-4 page 1
68-4 page 1
68-4 page 1
68-5 page 1
68-5 page 1
68-5 page 1
68-6 page 1
68-6 page 1
69-1 page 1
69-1 page 1
69-1 page 2

FABIA 2000 ³Body Work
Table of ContentsEdition 01.05
S00.5319.15.20 V
- Removing and installing the rear seat belts .......................................................
- Summaryofcomponents - middlethree-pointseatbelt at the rear ...........................
Inspecting seat belts ..................................................................................
- Checks ..................................................................................................
Airbag .....................................................................................................
- Airbag system ..........................................................................................
- Safetyprecautions whenworkingontheairbagsystem ........................................
- Replacing partsofthe airbagsystem ..............................................................
- Removing and installing driver airbag unit .........................................................
- Summaryofcomponents of four-armedsteeringwheel .........................................
- Summaryofcomponents of three-armedsteeringwheel .......................................
- Removing and installing restoring ring with slip ring .............................................
- Removing and installing passenger airbag unit ...................................................
- Removing and installing a side airbag crash sensor .............................................
- Removing and installing side airbag units .........................................................
- Removing and installing airbag control unit -J234- ...............................................
- Removing and installing the front passenger airbag switch ....................................
Removal of pyrotechnic parts before scrapping the vehicle ................................
- Disposal of theairbag unitsbeforescrappingthevehicle ......................................
70 – Trim panel/insulation
Dash panel ...............................................................................................
- Removing and installing the dash panel ...........................................................
- Removing and installing the central tube/dash panel ............................................
- Removing and installing the convenience system central control unit ........................
Door trim panels ........................................................................................
- Summaryofcomponents of frontdoor trimpanels ...............................................
- Removing and installing the front door trim panel ................................................
- Summaryofcomponents of reardoor trim panels ...............................................
- Removing and installing the rear door trim panel ................................................
- Removing and installing the rear door trim panel (Praktik) .....................................
Pillar and side trim panels ...........................................................................
- Removing and installing top trim panel of pillar A ................................................
- Removing and installing bottom trim panel of pillar A ............................................
- Summary of components of trim panels of pillar B ...............................................
- Removing and installing bottom trim panel of pillar B ............................................
- Removing and installing top trim panel of pillar C ................................................
- Removing and installing bottom trim panel of pillar C ...........................................
- Removing and installing top trim panel of pillar C (Fabia Combi) ..............................
- Removing and installing top trim panel of pillar D ................................................
- Removing and installing the base plate (notchback) .............................................
- Summaryofcomponents of entrance plate .......................................................
- Removing and installing the tailgate/luggage compartment cover (Praktik) ..................
Door trim panels in the luggage compartment ..................................................
- Summaryofcomponents of luggage compartmentcover ......................................
- Summaryofcomponents of sidetrimpanelofluggage compartment ........................
- Removing and installing bases for luggage compartment floor ................................
69-1 page 3
69-1 page 4
69-2 page 1
69-2 page 1
69-3 page 1
69-3 page 1
69-3 page 1
69-3 page 3
69-3 page 4
69-3 page 5
69-3 page 6
69-3 page 6
69-3 page 7
69-3 page 8
69-3 page 8
69-3 page 10
69-3 page 10
69-4 page 1
69-4 page 1
70-1 page 1
70-1 page 1
70-1 page 4
70-1 page 5
70-2 page 1
70-2 page 1
70-2 page 1
70-2 page 3
70-2 page 4
70-2 page 4
70-3 page 1
70-3 page 1
70-3 page 1
70-3 page 2
70-3 page 2
70-3 page 3
70-3 page 3
70-3 page 4
70-3 page 5
70-3 page 5
70-3 page 6
70-3 page 7
70-4 page 1
70-4 page 1
70-4 page 2
70-4 page 3

FABIA 2000 ³Body Work
Table of Contents Edition 01.05
S00.5319.15.20
VI
- Summaryofcomponents of rearcargo openingcover ..........................................
- Summaryofcomponents of trimpanels of tailgate ..............................................
- Removingandinstallingholder forluggage compartmentcover (estate car) ................
- Removingand installingtheside luggage compartmenttrimpanel (estatecar) ............
- Removingandinstallingthebonnet at therear(Praktik) ........................................
- Removingandinstallingthebonnet at therear(Praktik) ........................................
- Removingand installingthefinishing strip ........................................................
Moulded headliner .....................................................................................
- Removingand installingmouldedheadliner ......................................................
- Removingand installingthemouldedheadliner(Praktik) .......................................
- Summary of components of the moulded headliner noise insulation panels (Fabia Combi)
72 – Seat racks
Front seats ...............................................................................................
- Removingand installingthefrontseats ............................................................
- Removingand installingthegrip for theseatheightadjuster ..................................
- Removingand installingthebackrestrack fortheseatrack ...................................
- Removingand installingseatheightadjusting elements ........................................
Rear seats ................................................................................................
- Removingand installingseatbenchandbackrest ...............................................
- Removingand installingtherear armrests ........................................................
74 – Seat Upholstery, Covers
Front seat upholstery and covers ..................................................................
- Assembly overviewofcoversandupholstery forfront seats ...................................
- Assembly overviewofcoversandupholstery forbackrests ....................................
Rear seat upholstery and covers ...................................................................
- Assembly overviewofcoversandupholstery forrearseats ....................................
- Assembly overviewofcoversandupholstery forrearbackrest ................................
70-4 page 4
70-4 page 5
70-4 page 6
70-4 page 6
70-4 page 7
70-4 page 7
70-4 page 8
70-5 page 1
70-5 page 1
70-5 page 2
70-5 page 4
72-1 page 1
72-1 page 1
72-1 page 2
72-1 page 2
72-1 page 4
72-2 page 1
72-2 page 1
72-2 page 2
74-1 page 1
74-1 page 1
74-1 page 2
74-2 page 1
74-2 page 1
74-2 page 2

FABIA 2000 ³Body Work
Technical DataEdition 03.00
S00.5319.03.20 00-1page 1
00
00-1 Technical Data
Vehicle identification data
Vehicle identification number
The vehicle identification number (chassis number) is at-
tached to the right suspension dome.
The vehicle identification number (chassis number) can
also be found bottom left of the front window corner.
1 - Manufacturer's world code
2 - Model and version
3 - Engine type
4 - Airbag system
5 - Vehicle type
6 - Internal code
7 - Model year
8 - Manufacturing plant
9 - Body number
Detailed information on the meaning of individual signs
⇒Inspection and Maintenance, Chap. 02-1.
Type plate
The type plate -arrow- is attached to the left wheel house.
00 – Technical Data
Note

FABIA 2000 ³Body Work
Technical Data Edition 03.00
S00.5319.03.20
00-1page 2
00
Vehicle data sticker
The vehicle data sticker is located at the rear left on the
floor of the luggage compartment.

FABIA 2000 ³Body Work
Self-diagnosis for convenience systemEdition 01.05
S00.5319.15.20 01-1page 1
01
01-1 Self-diagnosis for con-
venience system
Notes concerning self-diagnosis for con-
venience system
The central control unit for convenience system -J393- is
located above the accelerator pedal in the dash panel. It
is clipped into the bracket on the heating housing. The di-
agnostic connector is located behind the storage tray un-
der the light switch.
Removing and installing the control unit for convenience
system ⇒Chap. 70-1.
Initiate self-diagnosis at the start of fault finding and inter-
rogate the fault memory with diagnostic device
-V.A.G 1552- or -V.A.G 1551- or -VAS 5052-.
♦The description which follows relates to the vehicle
system tester -V.A.G 1552- using program card -6.0-
(and higher version).
♦The use of fault read-out scan tool -V.A.G 1551- with
program card -9.0- (and later version) is almost iden-
tical except for specific deviations (e.g. other display,
possibility of using a printer etc.).
♦To end the output or to switch to another address se-
lect function 06 „End output“.
Theconveniencesystemcanbeadaptedtothecustomer
wish ⇒Chapter 01-4.
Types and description of convenience
system
Two different systems of databus cables are used in the
convenience system:
♦for vehicles manufactured until 07.2004 the CAN dat-
abus cable
♦for vehicles manufactured as of 08.2004 the LIN dat-
abus cable
Thedifferenceistheoperationofthewindowcontrol,
the fault tables, the measured value blocks and the
coding of the control unit.
01 – Self-diagnosis
Note
WARNING!
When replacing the central control unit for the con-
venience system or the alarm system with an inde-
pendent power supply disconnect the power
supply for at least 30 sec. in order to allow the
alarm to be adapted. If necessary, disconnect the
communication cable.

FABIA 2000 ³Body Work
Self-diagnosis for convenience system Edition 01.05
S00.5319.15.20
01-1page 2
01
In case of repairs or self-diagnosis of the conven-
ience system first the system of the communication
cable must be defined. This is detected by means of
the connection of the diagnostic device and by entry
of the addressword 46„Central module convenience
system“ ⇒01-1 page 4.
Convenience system with CAN databus cable
The convenience system comprises the electric equip-
ment in the doors:
♦electrical central locking system with SAFE function
♦power-window lifter with jamming protection
♦electrically adjustable and heated exterior mirror
It also comprises other systems in the vehicle:
♦Cut-off delay for interior lamp
♦Monitoring and disconnection of all interior and lug-
gage compartment lights as a battery discharge pro-
tection
♦Sliding roof closing function via outside closing com-
mand
♦Radio control for anti-theft alarm system and central
locking
♦the optical Safe function indicator (is a LED mounted
in the door equipment of the driver's door)
The system comprises the control unit for conven-
ience system and control units in the individual
doors whose communication between each other is
performed via the CAN databus cable. The communi-
cation between the central control unit for conven-
ience system and other electrical systems in the
vehicle is performed via the CAN databus cable.
The control unit for convenience system detects
faults in the convenience system (including faults at
control units in the individual doors) and stores them
in a permanent memory.
The displayed fault messages refer to a fault table includ-
ingindicationson thepossible causesas well as targeted
repairs.
Faults due to a temporary line interruption or loose con-
tact are also stored. These faults are displayed as spo-
radic faults „SP“.
Convenience system with LIN databus cable
The convenience system comprises the electric equip-
ment in the doors:
♦electrical central locking system with SAFE function
♦power-window lifter with jamming protection
It also comprises other systems in the vehicle:

FABIA 2000 ³Body Work
Self-diagnosis for convenience systemEdition 01.05
S00.5319.15.20 01-1page 3
01
♦Sliding roof closing function via outside closing com-
mand
♦Radio control for anti-theft alarm system and central
locking
♦the optical Safe function indicator (is a LED mounted
in the door equipment of the driver's door)
The system comprises the control unit for conven-
iencesystem.Itscommunicationwithotherelectrical
systems in the vehicle is performed via the CAN dat-
abus cable.
Control units are also located in the individual doors,
which however only operate the window lifters. Their
communication is performed via the LIN databus ca-
ble.
The LIN databus cable is not self-diagnostic with any
diagnostic device. This cable consists of an inde-
pendent electrical circuit, which has no connection
to other electrical systems in the vehicle.
The control unit for convenience system detects
faults in the convenience system (including faults in
the individual doors relating to the lock) and stores
them in a permanent memory. The faults relating to
the window control can be stored in the fault memory
of the convenience system.
Overview of the selectable functions of
the diagnosis for the convenience sys-
tem
WARNING!
If the window control is restricted or fully non-op-
erational, proceed according to „functionality of
individual windows“ ⇒Chap. 01-3, Fault table LIN
databus/control units for window control in the in-
dividual doors. This table is used for the diagnosis
of faults from the LIN databus.
Operation Page
01 Interrogating control
unit version ⇒01-1 page 5
02 Interrogating fault
memory ⇒01-1 page 6
03 Actuator diagnosis ⇒01-1 page 6
05 Erasing fault memory ⇒01-1 page 7
06 Ending output ⇒01-1 page 8
07 Coding control unit ⇒01-1 page 8
08 Reading measured val-
ue block ⇒Chap. 01-2, ⇒Chap. 01-3
10 Adjustment ⇒Chapter 01-4

FABIA 2000 ³Body Work
Self-diagnosis for convenience system Edition 01.05
S00.5319.15.20
01-1page 4
01
Connect vehicle system tester
-V.A.G 1552-
Special tools, test and measuring equipment and
auxiliary items required
♦Vehicle system tester -V.A.G 1552-
♦Diagnostic cable -V.A.G 1551/3, 3A, 3B, 3C-
Test conditions
•All fuses must be OK in compliance with the current
flow diagram.
•Battery voltage at least 9 V.
Procedure
–Open the storage tray -1- under the light switch -ar-
row-.
–Switch off ignition and connect vehicle system tester
-V.A.G 1552-.
–Switch on ignition.
Readout on display:
–Selectaddress word 46 „Centralmoduleconvenience
system“.
Readout on display:
–Confirm the entry with key .
Readout on display:
♦One of the following four displays will appear in the
event of a communication set-up failure between ve-
hicle system tester -V.A.G 1552- and the control unit.
♦Press key to display the possible fault causes.
The ignition must be on!
Malfunctions occurred at the start of or during the pro-
gram (external sources of interference).
–Check connection of the vehicle system tester
-V.A.G 1552-.
–After removing the possible fault causes re-enter ad-
dress word 46 „Central module convenience system“
and confirm entry with .
Read-out on display after entering address word „46“:
The display shows the control unit identification number,
e.g.:
–Press key.
1552
V
.A.G.
HELP
Q
O
C
9
8
7
6
5
4
3
2
1
Vehicle system test HELP
Enter address word XX
Vehicle system test Q
46 Central module convenience system
Q
Vehicle system test
Tester sends address word 46
Note
HELP Vehicle system test HELP
The control unit does not respond
Vehicle system test HELP
K cable does not connect to pos. term.
Vehicle system test →
No signal from the control unit
Vehicle system test →
Fault in communication set-up
Q
Vehicle system test
Tester sends address word 46
6Q0959433C OM convenience unit 0002 →
Coding 00259 WSCXXXXX
→

FABIA 2000 ³Body Work
Self-diagnosis for convenience systemEdition 01.05
S00.5319.15.20 01-1page 5
01
The following display relates to the system with LIN
databus cable:
In this case continue the self-diagnosis ⇒Chap. 01-
3.
The following display relates to the system with CAN
databus cable:
Readout on display, e.g.: (Door control unit driver's side)
In this case continue the self-diagnosis ⇒Chap. 01-
2.
–Press key.
Readout on display, e.g.: (Door control unit passenger's
side)
–Press key.
Readout on display, e.g.: (Door control unit RL)
–Press key.
Readout on display, e.g.: (RR door control unit)
–Press key.
Readout on display:
Interrogating control unit version
–Connecting vehicle system tester -V.A.G 1552- and
selecting the address word for the convenience sys-
tem ⇒01-1 page 4.
Readout on display:
–Select function 01 and confirm entry with .
Readout on display:
Thecontrol unit identification appearsinthedisplayofthe
vehicle system tester -V.A.G 1552- e.g.:
♦6Q0959433 OM = Part No. of the control unit (current
control unit version ⇒Electronic catalogue of original
parts)
♦Convenience unit = system description
♦0002; (TFK 0001) = Program number
♦Coding 00259 = Coding variant
♦WSC = Workshop code
–Press key.
Readout on display, e.g.: (Door control unit driver's side)
–Press key.
Readout on display, e.g.: (Door control unit passenger's
side)
–Press key.
Readout on display, e.g.: (Door control unit RL)
Vehicle system test HELP
Select function XX
6Q1959801 OM D.contr unit DDCU TFK 0001→
→
6Q1959802 OM D.contr unit PDCU TFK 0001→
→
6Q1959811 OM D.contr unit RL TFK 0001→
→
6Q1959812 OM D. contr unit RR TFK 0001→
→
Vehicle system test HELP
Select function XX
Vehicle system test HELP
Select function XX
QVehicle system test Q
01 - Interrogating control unit version
6Q0959433C OM convenience unit 0002 →
Coding 00259 WSC XXXXX
→
6Q1959801 OM door control.DD TFK 0001→
→
6Q1959802 OM door control.PD TFK 0001→
→
6Q1959811 OM door control.RL TFK 0001→

FABIA 2000 ³Body Work
Self-diagnosis for convenience system Edition 01.05
S00.5319.15.20
01-1page 6
01
–Press key.
Readout on display, e.g.: (RR door control unit)
–Press key.
Readout on display:
–Ending output ⇒01-1 page 8.
Interrogating fault memory
–Connecting vehicle system tester -V.A.G 1552- and
selecting the address word for the convenience sys-
tem ⇒01-1 page 4.
Readout on display:
–Select function 02.
Readout on display:
–Confirm the entry with key .
The number of faults stored appears on the display.
Press key to display the stored faults consecutively.
Cause and elimination:
Convenience system with CAN databus cable ⇒Chap.
01-2.
Convenience system with LIN databus cable ⇒Chap.
01-3.
♦If a fault is detected:
♦1. Remove fault.
♦2. Erase fault memory (Function 05).
♦3. Perform a functional test of the convenience sys-
tem.
♦4. Interrogate fault memory (Function 02) again.
If „No fault detected“ the program returns to its initial po-
sition after key is pressed.
Readout on display:
If anything else appears on the display: ⇒Operating in-
structions of the vehicle system tester.
–Ending output ⇒01-1 page 8.
–Switch off ignition and switch off vehicle system tester.
Actuator diagnosis
–Connecting vehicle system tester -V.A.G 1552- and
selecting the address word for the convenience sys-
tem ⇒01-1 page 4.
Readout on display:
→
6Q1959812 OM door control.RR TFK 0001→
→
Vehicle system test HELP
Select function XX
Vehicle system test HELP
Select function XX
Vehicle system test Q
02 - Interrogating fault memory
Q
X faults detected →
→
Note
→
No fault detected! →
Vehicle system test HELP
Select function XX

FABIA 2000 ³Body Work
Self-diagnosis for convenience systemEdition 01.05
S00.5319.15.20 01-1page 7
01
–Enter function 03.
–Confirm the entry with key .
Readout on display:
Door handle switches are lit.1)
–Press key.
Readout on display:
Warning lamp in door trim panel flashes.
–Press key.
Readout on display:
Exit warning light lights up.
Readout on display:
–Press key.
Sliding roof closes.2)
–Press key.
Turn signals on.3)
Readout on display:
–Press key.
Alarm horn activated.3)
Readout on display:
–Press key.
Readout on display:
–Press key.
Readout on display:
–Ending output ⇒01-1 page 8.
Erasing fault memory
Conditions:
♦Fault memory was interrogated.
♦Fault was eliminated.
♦Functional test was performed.
–Connecting vehicle system tester -V.A.G 1552- and
selecting the address word for the convenience sys-
tem ⇒01-1 page 4.
Readout on display:
–Enter function 05.
1) Not fitted on FABIA.
2) Only on vehicles equipped with sliding roof.
3) Only on vehicles with remote control or alarm function.
Vehicle system test Q
03 Actuator diagnosis
Q
Actuator diagnosis →
Inside door handle lighting
→
Actuator diagnosis →
CL warning lamp Safe
→
Actuator diagnosis →
Exit warning light
Actuator diagnosis →
Close sliding roof signal
→
Actuator diagnosis →
Turn signal control
→
Actuator diagnosis →
Alarm horn - H12
→
Actuator diagnosis →
END
→
→
Function unknown or cannot →
be carried out at the moment
Vehicle system test HELP
Select function XX

FABIA 2000 ³Body Work
Self-diagnosis for convenience system Edition 01.05
S00.5319.15.20
01-1page 8
01
Readout on display:
–Confirm the entry with key .
Readout on display:
–Press key.
♦If the following message is displayed the test se-
quence is incorrect:
♦Carefully follow the test sequence step by step: First
interrogate the fault memory and then erase.
Ending output
Readout on display:
–Enter function 06.
Readout on display:
–Confirm the entry with key .
–Switch off ignition.
–Disconnect vehicle system tester -V.A.G 1552- from
the connector.
Coding control unit
–Connecting vehicle system tester -V.A.G 1552- and
selecting the address word for the convenience sys-
tem ⇒01-1 page 4.
Readout on display:
–Enter function 07.
Readout on display:
–Confirm the entry with key .
Readout on display:
–Enter code number following table:
Table of codes for vehicles with CAN databus cable
Vehicle system test Q
05 Erase fault memory
Q
Vehicle system test →
The fault memory is erased
→
Note
Caution!
Fault memory was not interrogated
Vehicle system test
Select function XX
Vehicle system test Q
06 End output
Q
Vehicle system test HELP
Select function XX
Vehicle system test Q
07 Coding control unit
Q
Coding control unit
Enter code number XXXXX (0-32767)
Vehicle equipment Code number indi-
vidual door open-
ing
Code number over-
all door opening
Central locking without power-window lifter 00018 00019
Central locking with 2 power-window lifters 00066 00067
Central locking with 4 power-window lifters 00258 00259