Skope OD400 User manual

Open Face Cooler
User Guide
Safety
Always observe safety precautions when using any electrical appliance. Read these instructions carefully and retain them for future reference.
WARNING
Ensure the appliance is disconnected from the power supply before performing any cleaning or maintenance.
Do not cover the grilles or block the entry or exhaust of airflow by placing objects up against the refrigeration unit.
Should manual defrosting be necessary, turn off the refrigeration system and allow the ice to melt by air circulation. Do not use mechanical methods to remove
ice, as this may damage the refrigeration circuit.
Do not use any electrical devices or appliances inside the food storage compartment.
Do not use this appliance for other than its intended use.
Do not probe any opening.
Only use this appliance with the voltage specified on the cabinet rating label.
Ensure the appliance has adequate ventilation as this is essential to economical, high performance.
Be careful not to touch moving parts and hot surfaces.
For your own safety and that of others, ensure that all electrical work is done by authorised personnel.
If the power supply flexible cord becomes damaged, it must be replaced by an authorised service agent or similarly qualified person in order to
avoid a hazard.
Ensure all necessary safety precautions are observed during installation or removal of the refrigeration unit.
The appliance is not designed to be stable while in motion. Use extreme caution when moving or transporting it.
The appliance is not intended for use with perishable product, which are high risk foods likely to support the growth of harmful bacteria. Perishable
product requires continuously cold temperatures.
Do not store explosive substances such as aerosol cans with a flammable propellant in this appliance.
When no longer required this appliance must be returned to CCA for recycling/disposal in accordance with local regulations.
The cooler is designed to operate within a specific climatic class environment. See the cabinet rating label inside the cooler for climate class number.
The cabinet rating label includes relevant hazard symbols that may be associated with the cooler. Refer to the information below for symbol description.

Troubleshooting
Before calling for service, check the troubleshooting tips below:
Installation
The cooler has been installed by CCA in a suitable location and should not be moved. If the cooler needs repositioning, consult your CCA sales representative for
installation requirements.
Using the Cooler
The cooler is fitted with a night blind. Pull the night blind down when the store closes, and raise the night blind when the store opens.
The cooler is run by an electronic controller which monitors usage and automatically switches the cooler between "day" mode and energy saving "night" mode
when the night blind is opened and closed.
To ensure the cooler runs efficiently and reliably, follow the guidelines below:
Cleaning and Maintenance
To ensure the cooler continues to run efficiently and reliably, the following cleaning tasks should be carried out routinely. Always disconnect the cooler from the
power supply before cleaning or maintenance.

PRN8oo88 Rev 1.1 Oct. 2020