SKYDANCE EV5-L User manual

412
336-48V
5-24V
V+
INPUT
PWM SIGNAL
5
IN PUT
12-48VDC
OUTPUT
+
-
1 2 3
+
4 5
+
Technical Parameters
Warranty and Protection
5 years
Protection Reverse Polarity
Warranty
Operation temperature
Case temperature (Max.)
Environment
IP20
IP rating
Ta: -30
O
C ~ +55
O
C
T c: +85
O
C
LVD
5 Channel/12-48V/PWM signal input/Constant voltage output/3KV optoelectronic isolation
Mechanical Structures and Installations
Wiring Diagram
5 Channel 12-48V Constant Voltage Power Repeater
● 12-48V constant voltage power repeater.
● 5 channel, 4A max. per channel.
● To receive PWM signal control.
● Power repeater in series or in parallel to expand output unlimitedly.
● Apply to single color, dual color, RGB or RGBW or RGB+CCT constant voltage LED strip or module.
Features
Output type Constant voltage
Output power 5 x (48-192)W max.
Output voltage 5 x (12-48)VDC
Output current 5CH, 4A max./CH
Input voltage 12-48VDC
Input current 20.5A max
Input and Output
● Parallel connection
User Manual Ver 1.0.0
Model No.: EV5-L
Page 1
EV5-L 5 Channel 12-48V Constant Voltage Power Repeater
Input signal PWM(5CH, 5-24V or 36-48V)
PWM input + (5-24V)
CH1/R PWM input -
CH1/R LED output -
LED output +
Power input -
Power input +
CH2/G LED output -
CH3/B LED output -
CH4/WW LED output -
CH2/G PWM input -
CH3/B PWM input -
CH4/WW PWM input -
PWM input + (36-48V)
Safety and EMC
EMC standard (EMC) ETSI EN 301 489-1 V2.2.3
ETSI EN 301 489-17 V3.2.4
Certification CE,EMC,LVD
EN 62368-1:2020+A11:2020
Safety standard(LVD)
CH5/CW LED output -
17 9 . 00 mm
56 . 0 0 mm
30 . 0 0 mm
IN PUT
12-48VDC
OUTPUT
+
-
1 2 3
+
4
412
336-48V
5-24V
V+
INPUT
PWM SIGNAL
5
5
+
CH5/CW PMW input-
RGB+CCT LED strip
WW
CW
412
336-48V
5-24V
V+
INPUT
PWM SIGNAL
5
IN PUT
12-48VDC
OUTPUT
+
-
1 2 3
+
4 5
+
RGB+CCT LED strip
WW
CW
Power Supply
12-48VDC
Constant Voltage
+
-
+
IN PU T
12-24 VD C
V5-M
OU TPU T
W4 +
+
W5
Power Supply
12-24VDC
Constant Voltage
AC100-240V
AC100-240V
Power Supply
12-48VDC
Constant Voltage
AC100-240V
LED output +

● Series connection
1. The product shall be installed and serviced by a qualified person.
2. This product is non-waterproof. Please avoid direct sun,rain and high humid ambient.
3. Good heat dissipation will prolong the working life of the controller, Please ensure good ventilation.
4. Please check if the output voltage of any power supplies used comply with the working voltage of the product.
5. Ensure all wire connections and polarities are correct and secure before applying power to avoid any damages
to the LED lights.
6. If a fault occurs please return the product to your supplier. Do not attempt to fix this product by yourself.
Safety & Warnings
User Manual Ver 1.0.0 Page 2
Malfunctions analysis & troubleshooting
Wrong color 1. Wrong connection of R/G/B/WW/CW wires. 1. Reconnect R/G/B/WW/CW wires.
Malfunctions
Causes Troubleshooting
Uneven intensity
between front and
rear,with voltage drop
1. Output cable is too long.
2. Wire diameter is too small.
3. Overload beyond power supply capability.
4. Overload beyond controller capability.
1. Reduce cable or loop supply.
2. Change wider wire.
3. Replace higher power supply.
4. Add power repeater.
1. No power.
2. Wrong connection or insecure.
1. Check the power.
2. Check the connection.
No light
NOTE: The PWM input can be 5-24V or 36-48V, please select correct V+ wire terminal.
EV5-L 5 Channel 12-48V Constant Voltage Power Repeater
412
336-48V
5-24V
V+
INPUT
PWM SIGNAL
5
IN PUT
12-48VDC
OUTPUT
+
-
1 2 3
+
4 5
+
RGB+CCT LED stri p
WW
CW
+
-
+
IN PU T
12-24 VD C
V5-M
OU TPU T
W4 +
+
W5
AC100-240V
Power Supply
36-48VDC
Constant Voltage
WW
CW
412
336-48V
5-24V
V+
INPUT
PWM SIGNAL
5
IN PUT
12-48VDC
OUTPUT
+
-
1 2 3
+
4 5
+
RGB+CCT LED stri p
WW
CW
AC100-240V
Power Supply
36-48VDC
Constant Voltage
WW
CW
RGB+CCT LED stri p
WW
CW
WW
CW
Power Supply
12-24VDC
Constant Voltage
AC100-240V