SkyGolf Skytrak User manual

1
User Guide

2
Read carefully the SkyTrak Safety and Product Informaon Guide before setup or use
of the SkyTrakTM system. Failure to read and follow the Safety and Product Informaon
Guide may cause serious injury or death.
The SkyTrak system specicaons and funconality are constantly evolving, and we
may update or change the SkyTrak system in whole or in part, without noce to you.
Such updates may be required for you to use new funconality, access new courses or
features, or connue to access and use exisng courses and features. The courses and
features available for use on the SkyTrak system change from me to me, and not
all courses or features previously oered will be available. Some features require an
annual subscripon.
The soware in the SkyTrak system is licensed and not sold to you, and is subject to the End
User License Agreement set forth in the SkyTrak Safety and Product Informaon Guide.
IMPORTANT:

3
Table of Contents
Product Overview ........................................................................................................ 4
Charging Your SkyTrak ................................................................................................ 5
Geng Started .............................................................................................................. 5
Powering On/O .......................................................................................................... 8
Seng Up Your Space for SkyTrak ......................................................................... 8
Minimum Unobstructed Area Dimensions ........................................................ 9
Placement of Golf Ball ............................................................................................. 10
Helpful Tips & Care Instrucons ..........................................................................11
LED Color Code Chart ...............................................................................................12
Troubleshoong ..........................................................................................................13
Top Tips for Use ..........................................................................................................14
Registraon Process ..................................................................................................15
Upgrading SkyTrak Membership Level ..............................................................18
Network Connecon Guide ...................................................................................19
Soware Guide ........................................................................................................... 22
Video Connecon Guide .........................................................................................30

4
What’s in the Box
SkyTrak® Personal
Launch Monitor USB Cable Quick Start and Product &
Safety Informaon Guides
Product Overview
Laser
Opcs Lens
Power Buon
USB Port
See chart on page 12 for LED codes
Ready LED
Wi-Fi LED
Power LED
Wall Charger

5
Download the SkyTrak App
Find the SkyTrak soware in the Apple® App StoreSM or download the SkyTrak PC
applicaon on on www.skytrakgolf.com
Register Your SkyTrak
Launch the SkyTrak soware on your iPad®or PC and follow the instrucons in the
SkyTrak applicaon.*
If you already have a SkyGolf / SkyCaddie Account – Log in with your username and
password.
If you do not already have an account, select the “Create Account” opon to create a
SkyTrak online account.
Next, select “Register” to register your SkyTrak. Your SkyTrak’s unique serial number
will display and it will be registered with SkyTrak
2
Seng up your SkyTrak for the rst me is a simple 3-step process:
Let’s Get Started!
1
SkyTrak contains a Lithium-polymer rechargeable baery that can operate up to 5
hours on a full charge.
IMPORTANT: The SkyTrak must be charged for a minimum of 6 hours before use.
NOTE: It is advisable to ensure your SkyTrak unit always has a good charge. If the
SkyTrak baery is completely drained it can reduce the life of the baery. When a
low baery indicator shows in the SkyTrak App - charge the unit.
NOTE: The SkyTrak may be connected to PC via full USB to Micro USB cable
supplied. This allows the PC to run a constant charge to the unit, for all day use.
Charging Your SkyTrak
* Your SkyTrak must be registered within 30 days of purchase. SkyTrak comes with basic funconality in-the-
box and may come with some trial features, enabling you to start playing immediately. Advanced features are
available with a SkyTrak annual subscripon plan, which can be purchased at www.skytrakgolf.com.

6
a. Pair Skytrak With Your iPad
You can pair SkyTrak with your iPad in two ways:
• Via a direct Wi-Fi connecon OR
• Through your home network
Direct Wi-Fi Connecon
Follow the instrucons in the SkyTrak soware applicaon to pair your iPad directly
to SkyTrak via its Wi-Fi signal. Your iPad will NOT have an internet connecon when
connected in this manner.
Network Connecon (recommended)
SkyTrak can use your wireless (Wi-Fi)
home network to pair with your iPad by
connecng to your wireless network router,
just like your computer and mobile devices
do. SkyTrak will communicate with the
soware on your iPad through your router.
Plus, you will retain access to the internet
on your iPad. (See Network Connecon
Guide, pg. 18)
3
SETUP TIP: Once SkyTrak has been successfully congured and connected with the
soware on your iPad, all three LEDs will turn green and you will see a
red laser dot projected onto your hing surface.

7
b. Pair SkyTrak with your PC
You can pair SkyTrak with your PC in the following ways
Via a direct Wi-Fi connecon OR Via a direct USB cable connecon OR Through your home
network
Direct Wi-Fi Connecon on PC
Click on the Wi-Fi signal icon on your PC and select SkyTrak from the drop down menu, click
Connect.
USB Cable Connecon
Connect the micro USB cable to the SkyTrak device and a USB port on your PC
Network Connecon – SkyTrak can use your wireless (Wi-Fi) home network to pair with your
PC by connecng to your wireless network router, just like your computer and mobile devices
do. SkyTrak will communicate with the soware on your PC through your router. Plus, you
will retain access to the internet on your PC. (See Network Connecon Guide, pg. 19) If you
are using the USB cable connecon, remain
connected to your wireless home network.

8
SETUP TIP: Follow the Wi-Fi conguraon steps in the SkyTrak soware to select your
desired connecon mode. To make changes to your connecon, access the
Connecon Wizard near the boom of the main dashboard of the SkyTrak
soware at any me.
1. To turn on SkyTrak, press the POWER buon.
2. The Power LED (boom) will turn GREEN and you can start connecng SkyTrak to
your iPad or PC.
3. To turn o SkyTrak, press the Power buon again.
SETUP TIP: For opmum performance, it is recommended that you use a hing mat
for both indoor and outdoor use.
To reduce the risk of injury or property damage, it is recommended that the SkyTrak sys-
tem be set up using the guidelines below. Please ensure that you have created enough
space around you to safely play with SkyTrak and that you heed all applicable safety
precauons at all mes.
Powering On/Off
Setting Up Your Space for SkyTrak

9
Ceiling height: Safe ceiling height varies and depends on your physical height and the
length of your club.
Length: 10 feet (3,35m)
Width: 10 feet (3,35m)
Minimum Unobstructed Area Dimensions
CAUTION: Always use a safety net and a hing mat specically designed for golf if
the hing area or the ball ight area is restricted such as indoors or in the
back yard of a residence.

10
Make sure SkyTrak is raised level
with the hing surface.
Place SkyTrak parallel to your intended line
of play. Depending on your set up, this may
mean your target is not the center of the
net.
Once SkyTrak is properly connected to
the app on your mobile device, it will
display a red laser dot on your hing
surface. Place a clean, white golf ball
on the red dot.
Placement of Your Golf Ball
The intended target line should be parallel
to the SkyTrak for accurate shot simulaon.
Recommend using alignment scks to check
the target line. We suggest marking a line of
the target in the ground or the net to ensure
you are aligned to the target correctly.
Use of
alignment
scks/
golf clubs
increases the
accuracy of
intended line
of play.
TIP Being too far above or below the hing surface can aect consistent shot
capture and ball ight data. Recommended laser distance 11 ½” to 12 ½”
Place ball on red dot
- or -
Place base of tee on
red dot

11
• SkyTrak uses advanced opcs that are located behind its lens. Scratches and dust or
other issues that impact the lens quality may interfere with SkyTrak’s operaon.
Keeping the lens clean and scratch-free will ensure the measurement accuracy and
longevity of your SkyTrak system.
• Use a clean, damp coon cloth to clean the lens in a single wipe. Do not use any
chemicals to clean the lens.
• Carrying cases to keep your SkyTrak protected and other accessories are available
for purchase at www.skytrakgolf.com
• Never disconnect or turn o your SkyTrak while it is syncing. Wait unl it is nished
communicang before you disconnect it, power it o, or power o your mobile
device.
• Don’t expose your SkyTrak to extreme temperatures. Hot or cold condions may
aect performance.
• Don’t allow your SkyTrak to get wet.
• Don’t drop your SkyTrak, or hit your SkyTrak with your golf club or golf ball.
• Compability of your SkyTrak device with mobile devices, like tablet computers, varies by
mobile device and its operang system and display capabilies, which change oen and
are outside the control of SkyTrak. Not all mobile devices are compable with your
SkyTrak device. To view a list of currently compable devices, go to www.skytrakgolf.com
• Fully charge the baery prior to playing with your SkyTrak.
SETUP TIP: For opmum spin results, place the ball on the laser dot with some kind
of marking on the golf ball, such as its brand logo, facing toward SkyTrak’s
lens prior to hing.
Helpful Tips & Care Instructions

12
Power
LED
Wi-Fi
LED
Ready
LED Descripon
Baery is low and SkyTrak is about to turn itself
o. Please charge your SkyTrak as soon as possible.
SkyTrak is in Direct Connect Mode, waing for a
connecon with the SkyTrak Applicaon on your
tablet.
SkyTrak is in Network Mode and it is aempng to
locate and connect to a known Wi-Fi network.
SkyTrak is in Network Mode and it has located a known
Wi-Fi network. It is aempng to connect to that
network.
SkyTrak is in Network Mode and it is connected to a
known network. It is waing for a connecon with the
soware on your tablet.
SkyTrak is connected to the Applicaon. If the Ready
LED is not turning green quickly, please check to see if
SkyTrak is lted instead of being level.
SkyTrak is ready for your next shot.
SkyTrak is charging.
SkyTrak is charging, but the power of the charger is not
adequate, it may take a long me for your SkyTrak to
charge.
Use this chart to idenfy or troubleshoot SkyTrak’s various operaonal modes.
LED Color Code Chart

13
Problem Soluon
When charging, ‘Power’
LED does not come on
(AMBER)
Press and hold the Power buon for 5 seconds. Make
sure the USB cable has power. Try other ports on your
computer or use a compable USB wall charger. SkyTrak
should be turned OFF to charge.
All 3 LED’s turn red and
unit turns o aer 15
seconds
Baery is low. Connect the USB cable and charge the unit.
The Power LED will turn o when SkyTrak is fully charged
and ready to go.
‘Wi-Fi’ LED is not turning
green
First, ensure that your SkyTrak is connected to the Wi-Fi
network. Then start the SkyTrak soware on your iPad and
allow it to load. When the applicaon is open, SkyTrak’s
LEDs will show whether it successfully connected.
Wi-Fi and Power LEDs
are green, but ‘Ready’
(top) LED is red
Your SkyTrak may have been triggered by a waggle
or other club movement. If you’ll wait a few seconds,
it should turn green again. If it sll doesn’t turn green,
you should check your Wi-Fi connecon and restart the
applicaon on your iPad.
Results seem inaccurate Be sure to posion the ball correctly on the red dot and
make sure the unit sits level with the hing surface. If
using a tee, make sure the base of the tee is on the red
dot.
Should this Trouble Shoong Guide not answer your queson, please refer to the
Frequently Asked Quesons at www.skytrakgolf.com .
Troubleshooting

14
Top Tips for Use
1. We recommend hing o a mat designed specically for golf. Place the ball or the
base of the tee on the red dot projected by the laser. If a mat is not available, we
suggest hing o a tee from the grass. Irons and wedges hit directly o the grass
create dirt and grass parcles from the divots that can make for inconsistent shot
capture.
2. SkyTrak performs well in overhead sun. Avoid direct sunlight into the system during
use. Direct sun into the opc lens of SkyTrak can create problems for consistent
shot capture. If available, please hit from a covered area .
3. Use a clean, white ball with a logo or a marked line. Set the ball up with the logo or
line facing SkyTrak for beer spin readings, whether indoors or outside.
4. Prior to an outdoor demo, pick out a target on the range and align SkyTrak so that
it sits parallel to the intended target line.

15
Your new SkyTrak includes a 30-day trial in order to play with your SkyTrak right out
of the box. The complimentary trial period gives access to pracce sessions and basic
sengs. Aer the trial period you will need to complete the registraon process and
sign up for a SkyTrak membership plan that best suits your needs.
Registration Process
1. To register a new SkyTrak, you will rst need to download the SkyTrak app to your
iPad by searching for “SkyTrak” in the Apple App Store or download the SkyTrak PC
applicaon from www.skytrakgolf.com.
2. Open the SkyTrak app and sign in with your SkyGolf account username and
password. If you do not already have a SkyGolf account, choose the “Create
Account” opon.
3. Your SkyTrak will need to be in Network Mode in order to complete the registraon.
For instrucons, please see the network connecon guide.
4. Select the prole menu from the top right corner.

16
5. Select “About.”
6. Select “Register Device” buon.

17
7. Select “Yes,
Register My Device.”
8. Aer receiving the
message that your
device is successfully
registered, select
done.
9. Your SkyTrak is now
registered to your
SkyGolf account and
will receive basic
features.

18
To access premium features such as challenges and full course play with our simulator
partners, you have the opon to upgrade your membership level. For a full overview of
membership opons, please see hps://shop.skygolf.com/c-208-skytrak-plans.aspx
1. Aer purchasing an upgraded membership, you will receive an email from SkyGolf
to acvate your membership.
2. Select the “Acvate” buon in the email to nalize your membership upgrade.
To begin using you the SkyTrak with upgrade plans such as Game Improvement or Play &
Improve
1. Connect your SkyTrak via network mode and login to the SkyTrak App with your
username and password.
OR
2. Connect the iPad to your WIFI network, login to the SkyTrak app with your username
and password, and wait unl they see the “Data Synced” message at the top. Note
this does not require the SkyTrak to be paired to the iPad or PC.
Upgrading SkyTrak Membership Level
IMPROTANT: Your SkyTrak must be updated with membership informaon so that you
can begin playing with your new soware.

19
SkyTrak can be connected to your iPad or PC several ways:
Via a direct Wi-Fi Connecon, through your home network/wireless router or USB
connecon (PC Only).
The Direct Wi-Fi Connecon should be used if
you do not have access to a reliable Wi-Fi
network (such as on the driving range). When
using a Direct Connecon, your iPad or PC
connects directly to the SkyTrak’s Wi-Fi, and
thus, does not have access to the internet.
The Network Connecon via network/wireless router should be used when you have
access to a reliable Wi-Fi network. This connecon mode is required for certain features/
simulator opons where an internet
connecon is needed. When using
a Network Connecon, your iPad or
PC uses the wireless router as a
bridge to connect the SkyTrak unit
to your iPad or PC so the iPad or
PC an maintain a connecon to the
internet.
USB Cable Connecon
Connect the micro USB cable to the SkyTrak device and a USB port on your PC. If using
SkyTrak on the PC via a USB connecon, your PC can remain connected to the internet
via LAN or wireless.
Network Connection Guide

20
1. To connect in Network Mode, Click the ‘Device Connecons’ icon at the boom of
the SkyTrak app dashboard.
2. Please follow our detailed instrucons in the soware to connect SkyTrak in
Network Mode