SKYNAV AT-206 User manual

User Manual
v1.1.3.2022-206
SKYNAV Technology, Inc.
ADD 6F., No105, Xicheng Rd., Banqiao Dist., New Taipei City 220, Taiwan (R.O.C)
Tel:[phone] / Fax:[phone]
www.skynav.com.tw / [e-mail]
Made in Taiwan
What do I need?
The tracker, Rubber, VHF antenna
RECYCLABLE
PACKAGING
Software setting
Download and install the software on PC.
Connect the supplied USB cable to the AIS tracker and PC.
Open the software and choose the right COM Port and required
model of the device.
Plug in the data cable.
1Turn on the AT-206.
2Connect to PC by USB. 3
Warning
AT-206 is a fully certified Type 1 AIS Aids to Navigation buoy tracker.
This device has some optional user activated functionality which may
not be permitted in some countries. If you are in any doubt, please
check with your local authorities.
Notifications
Stay away from fire.
Do not crash by Human negligence.
AT-206 Solar Powered AIS AtoN Buoy Tracker
The tracker
Rubber
Start the AT-206 setting software.
4
Enter the MMSI, Name (17chacators) and select Interval.
6
Enter the information of your vessel or buoy.
(The blue point is the position of our tracker.)
7
If yes, Click the “Exit”.
13
Select the Encryption function and enter the encrypt code if you need.
(The encrypt code should same with your AIS transponder.)
8
Choose the right COM Port and click the “Connect”.
5
Select AIS type. (Standard is for vessel ; AtoN is for buoy ;
Older AIS is for vessel with older chartplotter it can’t receive Name of vessel.)
10
Click the “Set”.
11
Click the “Query” to check is the information set up correctly done.
12
Select the ON/OFF of night lighter.
9
Flat holder
Rod holder
Accessories (choose one)
VHF antenna

Application
Specification
User Manual AT-206 Solar Powered AIS AtoN Buoy Tracker
v1.1.3.2022-206
Maintain
Please replace the battery per year to ensure the stability.
Please replace the waterproof rubber every 8~12 months to prolong
the product life.
Distributor
Sold Date: ___ / ___ / ______ (dd/mm/yyyy)
Warranty
Remark:
1.One-year warranty effects from the purchase date.
2.The warranty covers any manufacturing technical
defect excluding breakage.
3.The warranty does not cover faults resulting from
operation careless handing or not the following
instruction. Also, to electric shock cases.
Please keep this warranty card to retain
buyer’s legal rights. No replacement if lost.
Quad Band：161.975 MHz / 162.025 MHz
Output Power：2 W
Battery：12.6V 3200 mAh
Battery Type：Rechargeable Li-ion battery
Operating time：Over than 1 year (reporting interval: 3 min)
Size (Main Body)：19.7 cm x 21.2 cm
Weight (Main Body)：850g
Waterproof：IPX8
Operating Temperature：-10°C~60°C
Storage Temperature：-20°C~70°C
Fishing buoy, Marine observatory, Offshore platform, Weather buoy.
LED Flash Code
Installation
Notifications
If you need to continue to set another AT-206, you do not need to re-enter
your password and COM Port.
Just click connect and repeat step 6 to 12.
Please remember to restart the AT-206 before test and use it.
The SOS button is inside the fixing hole.
(Optional function for vessel user)
Flashing 1~9 times (red & green) to
show battery level 10~99% while
turning on the tracker
The red light continues lighting
Fast flashing red after showing
battery status
Flashing green per second
Green light stop flashing
Flashing red & green for 2 times
per second
Battery status
You didn’t set the MMSI and
vessel name correctly
Low power warning that the power
is less than 50%
GPS signal searching
GPS signal fixed
Transmitting AIS data
Fasten it properly while installing the antenna and the transparent cover.
Setting it on the target that you want to track. And make sure the
environment is outdoors without hindrance.
Please install AT-206 more than 1 meter above sea level to increase
transmission range.
Install at the highest position.
Check the Battery status:
Red and green light flashing 1~9 times shows battery capacity 10~99%.
For example:
Red light flashing 3 times → battery capacity 30%
Red light flashing 6 times → battery capacity 60%
Red light flashing quickly for 10 seconds shows the battery is less than 50%
GPS searching status:
Green light flashing is searching GPS.
Please put the Tracker outdoors or along the window in order to receive the
GPS signal.
After 40~70 seconds, the green light stops flashing while the GPS signal
is fixed.
AIS signal status:
Flashing red & green 3 times at the same time means the AIS data is
transmitting, once the signal transmitted the light will stop flashing.
Congratulations, you set the Trackers successfully.
Check the device is work
14