Skypecam CVABP-I355 User manual

iG
.\
..r
* =€*=:r--
Internel
Fl::'i]:":1.t1i]li:::.=..:.::.:::..::..:.:.::.:.....:::::.:-*.Es;ji$*BE..Effi
Network Phone Camera
-Skypecam
User Manual
B+-:iBls..?$iij lS::.lt'=:j:-.:::.:::-:..,.,::,r:,:.=:..:i=::i==++,W:.F* -i;Fj={i,*
I

Re.d and undentand thoroEghly this safety awaretrBs & instructiotr before using .Dd keep it
for future refereoce,the dwice is @[ed Sk]?ecam in this tert
Safety Precaution:
Do not place heavy obj@t on the Sk,?ecm.
Do not let uy solid or liquid fall into or infiltate the Skypecm.
Do not disassemble, repair or replace the parts ofthe Slq?ecm by youself
Using environment:
Please place ud use tho Slq.pecam between 0.C md 40 t.Avoid direct sulight or stay away
from heat.
Do not install the Skypecm in damp mvironment.
Do not expose the Skypecm in smoky or dusty environment.
Do not drcp the Skypecam md avoid strongly collision.
Please insw the Skypecam level installation in a stable workplace ad prevent the Skypecam to be
dropped
Please install in well-ventilated place. Do not block the vents.
The Skypecam only cm be ued within the range ofrated input ad output.

m
ffi
j
Netuo* Phone Canera Use,
Gontents ' 1 Product Introduction
l.l Product Overuiew
The Skypecam series is a type of excellent intelligflt hore prcduo specially designed for
ability and remote control ability. It introduces wireless leming cods tehmlogr md wirels
It cm realire the video call not only between two Slq?ecam, but also among smart phone,
After inserting U disk or Micrc SD to Skypecam, it can realize simultaneou stonge ad
' You cm seach video files intelligent on the device and playback video on the screen directly.
Remote monitor
It cm achieve remote monitor by using mobile APP to dial 3C number
Wireless alam
It infoduces wireless leming code md wireless detectorto construct alm system, @d also
email alm function is supported.
2.2 The froDt pmel md retr pmel ......................... .............................................-........4
t Product lntroduction .
4.1 Main menu navigation...--. .-----. -......,.- ............... 10
5 Remoteaccess&videoca||s................,... ......................18

2 Openaackage inspection and cable connection
2.l Opef, package check
Firt, pleme check whether there is any visible damage to the package appeilance. The
pru{tive material used for the package ofthe Skypecam cm sustain most accidental cJashes during
the msponation.
Then, please open the box and get fid ofthe plastic protective coating. Check whether there is
any visible damage to the Skypecam appearance.
2.2 The front panel and rear panel
The key flmction specification in the front panel and the interlbce specification in the red pmel
ue described in details in the manual,
Please check carefully the product model in the bottom plate or in the rea panel film whether
is accordmt with the model you ordered.
The label in the bottom plate or in the real pmel is very important for after-sales service, please
protect it carcfully.
Please provide the product model and serial number in
the label before you contact our after-sales.
2.3 The front and rear panel key function
Piolot lamp:From left to right ffe:
Alm)
Key area
d* ff *a ft {N"t*o.t, Defence,Recording,

The front button opeEtion function
\u Buttoo
name Mark Fuoction
1!{umber button 0-9 * Input the nmber key duing user input shte
2i:*;4*i
+ Short press to decrese the volume during video call or
playing state
+ Shofr ple$ to delete text duing edit shte
+ Long press to record/stop recording duing mmual record
3Ctrl shifr/
defense L#;
+ Short press to increase the volume duing video call or
playing state
+ Short press to switch input method during edit state
+ Long piess to do defense/cmcel operation
4 Dial/preview *** Short press to dial video call dwing stmdby state
Long press to enter real-time prcview during stmdby
mode
+
+
5Hang up/Exit ffi * Hmg up call duing video call
+ Back to above level menu and exit cment state
6Di16ction bufron
ffi*E$t
^,
+ Remove dle cwsor by up md doM buttons when the
main menu or submenu is popped
+ Add or decrease trMber duing edit state
4 Changethe setinginthemenu
+ Play last or next video file by up md doM bufions
durins the Dlavback state
sffi
sffi
+ Move the cusor by left md right buttons when the main
menu or submenu is popped
4 Play in the multilow or multi-fast video dudng the
playback shte
7Main
menu/confim
key trffi +
+
Confim
Enter main menu
Neilo* Phone Canera tlser Mnhual
2.4 The rearnnnel
@ Network interface @ WIFI mt interface @ Learning code indicator @ Leming button
@ Power switch @ Power interface @ USB interface @ 3C smart cad interface
@Micro SD card interface @Earphone interface

\.r'.rk Phane Cuntetd l,tst Mdnutl
Nilark Phoke Canen User .rldnu.;
3 Basic operation
3-l Tum on
P.us rhe po$er supply and tum on the power supply swilch to "ON,', the Skypecam enters the
ii i:3m.
Suggest using the stable input voltage and power input ilpple with less interference to make
sure the Skypecam power supply.
Suggest using the LIPS to protect the power supply under allowable condirjons
3.2 Turn off
Check and confim the recording is stopped before turn off the Skypecam, tum off the power
supply switch to "OFF", or pull the rear panel pou,er switch that caD switch power.
Auto resume after power failure
If thc Skypecam is shut dou,n abnormally, it cm automatically backup video md resume
previous working status after power failure.
lnsert the U disk or Micro SD card
Please make sure the Skypecam is not in recording state before inserting the U disk or Micro
SD card, otherwise infbrmation will loss or storage equipment will be damaged.
Replace the battery
Please save the setting infomation and tm off the power supply switch before replacing the
banery. The Skypecam uses button battery. Please check the system time regularly, ifthe time is not
corect, you need replace the baftery Suggest replacing the battery every year and using the same
Ilpe battery.
\ote: The setting infonnation must be saved beforo rcplacing the battery otheNise inlbmation will
lose.
3.3 Standby state
Tum on the Skypecam and enter standby state, the system standby is shown as below:
Picture 3. I Login interf'ace
lcons meaning under standby state:

Net||ark Pha"e Cdilera User )!onm- \?trork l'hane (:a"lerd lher Mdhral
4 Main menu
P_ss :unon u , the system main menu is shoun as belotr. You can operatc and set each flmction
i: rhi: menu.
4.2 General setup
Set the basic parameters of the system, please click lmain menul> [general] to enter the
general setup inte.face,
(Time setupl Ser rhe.)srent dare and lirne.
(Language setup) Set the system language.
(Video format) According to PAL or NTSC used in different areas, set the video fomat ofthe
system.
(Access password) Set the password of network remote monitoa, the password only can bc
numbers; You must set access password for the system in the first time, otheNise the remote
monitor can not be used.
4.3 System setup
Update and maintain the system, please click [main menu]> lsystem] to enter the general setup
inter{ace
Picture 4.1 Main menu interlace
4.1 Main menu navigation
Main menu Function Overuiew
General Set the basic pararneters ofthe system
Update and mairrtain system and show rclated inlbrmation
System ofthe system
Play Scarch and play video liles
Network Set the basic parameters ofthe network
Alarm Set the basic parameters ofthe almm
Record Set dili'ercnt record modes
Picture 4.2 Cencral setup interface

Picture 4.i System seup iilerface
(Restore factory) Re.lore.).ren ro laulor) .ctrir s.
ISystem update)You can update and maintain the system when there is system software need to be
updated. There are two ways: local update and cloud update. Local update: Copy the update file to
U disk or Micro SD card, then inscft U disk or Micro SD card, Press update buttonffiand then
press butlon*5..to updatc after systen delect rhe update file,the system will reboot up ailer tinish
updating. Could update: Under net\\,ork siate, press the update buttonffil,then the system will
aLL'rnrli(dll) derecl uhether thcrr i. filc ileed to be Lpdct(d. Pr<.. hglq- -q. .he .1.ren urll
automatically upbad and updaie al'ter detect the new veNion .'I'he system will reboot up a11er firiish
updating.
[3c IDI The 3C lD number will be shown here alier insefr 3C srnart card to the dcvice.
(Version information I 'fhe cuflent system version iDtbrmation is shown.
4.4 Play
Search and play vidco files, you can click lrnain menu]> fplay] to enter the video playback
interf'ace.
Pt.n. l)lil?tu ltv LL,1tt]
Picture 4.4 Video retrieval
I Fast retrieval ) Enrer the video playback interl'ace, you can search system r ideo tilc ofrhe dar
afterpresssearchbutton$Sl directly.Ifthereisnovideo,it*illshow"novideofilelbund"-
Picture 4.5 Video retrieval
[Accurate retrieval) Move the cursor ro adjusr the stating and ending lime, the \\indo* \\ill
pop-up the video Iile list which conforms to searching condition alier press search buron $1,
press up-down md left-right buttons to move the cursor to select the larget 1ile, then press
button q toplay.
1

\.iork Ph.nr anln.n Ii{.-Mnnrnl
Pictuie 4.6 Video retrieval
(Playl During play s1ate, press left-right buftons to futish l'as1 lbrward and rewind operation
and press up dou,n buttons to switch different video files. Press the button.Jato \t()f Jila) ing.
Press ilght key for single-frame playing during stop-playing state. Press bufton.*1._or #n.can
adjust the volume.
4.5 Network setup
Set netsork parameters, you can click lmain menu]> [network] to enter the network setup interface.
( lP ) Set system IP address. ) ou can automalicali) r.: rsDll] s.r rhe I P address.
Through automalicalil :et the IP address. i)sl!-r \:1 3::.rnrli. f,cc.is ro IP by DHCP;
I hrough manuall) set the IP address. vou can manuall\ s: ia IP 3.]jia:! !\ irem \\ ill automatically
detemine the net\\ork seqment of IP address. rou .r:ir ::tc =::;..\ !e: rhe last one of lP
address. )
I lnternet) According to access way to net\\ ork to chtrrse \ r::i o: \\ ]Fl :--:re:rirrn lLr lnremet.
Equipped u,ith wire, system will connect intemet firough the \\ irri ..ai.i.i: L :::-: \\ IFI. sysrem
uill search WlFl and set the connection accordingly, the connacred i::a-3: ::.3 ii s ::{\\n
after successful access, md WIFI connection icon will be sho\n in srmJtr i:::::-:
4.6 Alarm setup
Set alann parameterc, you can click lmain menu]> [alarm] to enter the alam setup interf'acc.
You need pre-staft the defence system before using alarm lunction, system enter defence saate after
long press button JUL in 15 seconds, defence indicator will constanl light.
Picture ,1.8 WIFI setup
Picture 4.7 Network setup

Picture 4.9 Alarm sctup
(Send e-mailI When thcre is alarm or alam linkage ofcapture images, you can sencl spccific
alm inlbrmation or capture images to given eflail address.
E-Mail Alarm
Picture 4. i 0 Email alarm
IMotion detectionl This option is turned on and when the system dctects the mobile signal thar
rcached a preset sensitivity by anal),zing the video image, motion delection alarnr
rviil be bootcd.
(Screen capturel You can choose the quetity ofsystem autonutic screen capture when alann
appears, the images will be saved in U disk or Micro SD card.
( Buzer) You can set the alarm durat jon of system speake r when alarrr appears_
::.tr..:: Pibne CnDwa L'\er Mdilu.l
4.7 Recording setup
Set different record modes. \'ou can
intert'ace. You can set three record modest
blink during record state.
click lme:: :::: > :-:!_:i- :.- er!3r lhe record setup
manual-air L:;:::::. .-::.i-'aa! LED indicator will
i1
Picture 4.1 I Record setup ( 1 )
(Alarml When motion detection or outsido alam triggers, system *ill autturr:ic:.i l:
record stale; Record timirrg indicates lhat record duralion alier lrigger lhe alarm.
Pictue 4.1 1 Record setup (2 )
(Timed) You can set the record time, syslem will automatically enter record state during this

Neh"a)k Phone Qtkru tiso Mdnudl '..:. - P)ait ti,"a! t !1 vd"udl
\ ou can make remote monilor lo lhis Skypecail ali.'r a::i: Ja-:a: :r:i::. ::s:r ords: ]f the remote
moritor fai1s. please check \\ helher lhe nel\\'ork oi r::r!: : ::r ::: :: : - :::
l:Ncw Uscr lD Reeiste r and Losin :
HffiH
2:Steps of the Rcmote Monitor: ForExample: Sklpec:: iC
E-I
E--'Il'I#
ffi
.f \: il
I
\i++ L --'__-
Install the Skypecam App Softu.are(sricctv02)
( I ): Smad Phone with the"Barcode scanner",Please Scan QR code b ger tlte App(sricctvo2)for
runinu our Skypecam, then do*,nload and install it.
(2): Smaft Phone *,ithout rhe "Barcode scanner":For Android system: please search ..sricctvO2,'i.
i r,ur soosle search engine. Find out the APP "sriccrv02", then doq,nload and install it.For iOS system:
rrch as:iPhone. iPad. Please search"sricctvO2"in the App Store, then dounload and install it.
Boot up the application alier normally installing Skypecam client soliwarc to cell phone or
::t,ler conrputer ctc. click on thc dial screen and enter the 3C lD as required, then olick rcrnoie
:ir.iror bulton arld rhe dialog box will be popped Ltp to rcrnind you ol entering acccss password.
Stepl:Iq)ut Pa5s$ord
Step5 :Coiurect Succeed
Steps of the Remote Monitor
5.2 Video call
Video call between two devices
Dial among WAN netlvork: Alter Skypecam connecting to intemcr nomallr. th.'icon ol standby
abnormal network connection will disappear. the Skypecam is online stale. lhen I ou can makc r ideo
cdlls aner dial the lC lD ol th( uther d<\ rc(.
Picturc 4.12 Record setup (3 )
5 Remote monitor and video call
5.1 Remote monitor
You need cofect1y connect to tl]e net\\'ork bclbrc remote monitor For network setup, pleasc sec
-1.5 [Main menu) > (nctwork selup)
Remote monitor between two devices
The intcmet abnormal connection icon of standby interface \vill disappear alier norrnal access
lo fie intemet, and the systetn is online statc. Example: u,hen using dcvice A to nlake relnotc
rronito. to device B(the 3C lD is 1001), you need set rernote monitor passlvord fbr devicc B(see
[\,lain menu) > [generall ).And sel de!ice A as follorvs: press ,,1001#,,and dial it, the clialog box
\ill be poppcd up to remind you of entering acccss passrvord, press confirnt button aller enter
passu ord, then device A can makc rctnote monitor to device B.
Using cell phone or tablet computer to make remote monitor to the Skypecam
ffi
ffi

r:::gL\\nen\ork.lirsodcr.icesinsameLA\-\.oucanlnakevideocallsatterdialthelast
::.1:,lJress.F.rrmplc:thelpaddressofde\iccAordcviceBinLANis:192_l6g.l.l0
- -. ..iL'\r.c.\caDdial..ll k)makc\idcocall$ithdericeR
- s r g mobile devices such as cell phone or tablet computer to make video calls with
i-e device
3.,1 up the application after nornrally installing Sricctr02 or Skypccam clicnt soiitarc to cell
:: ::i rrr tablel computer etc. click on the dial screen and enterthe JC ID as required. ciick rideo
::.- tufton to make vidco call qirh the Skypecam; Ifrhe rideo call fails, please check \\heiher the
1al\\ork of mobilc device is nomrl
Step i :liput Sk!?san
]C ID NO- Step:: Chck \ids Call Buftotr
Step4:Connect Succeed
Steps of the Cideo call
r)
Stal:ComeMg

\ztu-otk Phore Canerd Uset Mah"al
6 Wireless learning code
6.1 Wireless detector leam code to match the Stypecam
In order to trigger the alm, all the wireles det{tfrs EN l@r @d. b ffih the Skypecam.
The specific operation d follows: FiNt press device lming brnm, *lE 6e red lamp of s'Holor
LED lights up, then trigger the wireless detector that need b bc Er{ied b ErMir a signat, if the
red lamp of two-color LED fl4hes which indicatd lming is s6, afta rE laning wceed-
when the wireles detector is triggercd thm the red lmp of eoola LED ritt bc lidred up.
Analogouly, the device cu lem 4 different-code wirels detc-tqs
6.2 Remote controller learn code to match the Skypecam
In order to control the device nomally md make or cmcel the defqce, all thc m molla
must leiln code to match the Sk)?ecam. The specific opemtion c follms Frl qdffy gs
device leming button twice, when the blue lmp of two-color LED lights l4L tha F6 rI brffi
of remote contoller to transmit a signal, if the blue lamp of twmolor LED flads rtich irrli:
leaming is success, after the leaming succeed, when press any buttoN of ffi ffillsrba lb
blue lmp of two-color LED will be lighted up. Analogously, the Skypw o lc-n ,l
differcnt-code remote controlleN.
7 FAQ and Maintenance
7,1 FAQ
Ifthe problems ae not listed, please contact local service or call the HQ seruie, we will ry the
best to serye you.
The Skypecam cantrot boot up normally.
Possible reasons re as follows:
l.The power supply is wong.
2.Switch power supply line is not in good comectio n.
3.Switch power supply is damaged.
4.The progrm updating is wrong.
5.The front pmel is damag€d.
The Skypecam reboots automatically or stops workitrg after b@t up r ffr Eitrlt6
Possible reasons ae as follows:

Netuolt Phote Cailqa Uset tund
l-Ib ipr voltage is not stable or too low
lfb pwq of sitch power supply is low.
3fMtal Yid@ signal is not stable
43ad lst ndiator or too much dust or bad ming circmstmce of the Slqpecam.
S-The hrewae of the Skypecam is damaged.
System catr not detect USB or Micro SD csrd
Possible remons ae as follows:
l The USB or Micro SD card line is not in good connection
2.The crd slot is damaged
3.The storage equipment is damaged
4.The USB port of main bord is dmaged
I can not fitrd the video lile in local playback mode.
Possible reasons ae as follows:
l.The storage equipment is dmaged.
2.The query condition is mong.
3.The video files to look up arc covered.
4.The recording is not on.
The local video is not clear.
' Possible remons ae as follows:
1.The image quality is too bad.
2.The reading progm is mong, bit rute is low md firll screen mosaic during playback.
Nomally the problem will be solved after reboot up the Sklpecm.
3.The stomg€ equipment is damaged.
4.The hard disk is dmaged.
There is no audio signal itr the suneillatrce window.
Possible reoons ae as follows:
W PbE CMra Usq M@ual
l.It is no&m active ttr am.
2.lt is not m active umd box.
3.The audio lins rc damged.
4.The hadwrc ofrhe Skypecm is dmagpd
The tiEc is wmtrg,
Po$ible re6o6 e as follows:
l.Sefting is wong.
2.The battery is in bad connection or the voltage is t@ low-
3.The oscillation is damaged.
The motion detect is trot wrong.
Possible recons tre as follows:
l The motion detect dsa setting is not corect.
2.The sensitivity is too low.
3 .Limited by some hedwile edition.
The image is not clear or there is no image itr tretwork preYifl or vilco ft PL!,L..I
state,
Possible reasons ae as follows:
l.Network is not stable.
2.The user mchine is resouce limited.
3.The user has no suneillmce puniew.
Network contrection is not stable.
Possible reasons ee as follows:
1.Net'ilork is not stable.
2.lP address is conflicted.
3.MAC address is conflicted.
4.The network cad of the computer or the computer is bad.

Cdnen Usel Mahtal
T2hnane
Plc e the Skypcam in dry environment so that the Sklpecam can work long-tem and stably.
fh. danp dut in the circuit botrd will cause short-circuit which will interfoes the Sk,?ecam
umal ming or dmages the Sk)?ecam.
Plee keep the grounding well done to prevent the video or audio signal interfered and the
Skypecm liom static or inductive electicity.
Please keep the Skypecm away from the heat resource.
Please keep the Skfpecm ventilated for better heat radiator
Please check md maintain th€ system rcgulaly.
This mmual only for the basic operation, please refer to the electonic mmual CD-ROM for
detailed opemtion.
Equipment updated in real time, there is no notice ifupgraded.
If you have doubt or dispute for product description, all will be subjected to the ultimate
interpretation of the company.
The manual is for the number ofproducts for reference, the specific operation ofeach product is not
e exhaustive; if you have my difiicult pioblems, plede contact the compmy customer setrice
department.
Factory Name:
Factory Add:
Sales Service Point:
Product Name Product ID
Product Model Product Color
Purchase Date
Customer Name Customer Phont
Customer Add
Fault Phenomenon:
Processing Method:
Customer Sign Date
Maintenance Man sigl Date