Smad TS-03 User manual

User Manual
TRAVEL HANDHELD GARMENT STEAMER
Model:TS-03

1
Dear Valued Customers
Thank you for purchasing this product. Please read this manual before using your
appliance. For more product information, FAQ and customer support please visit
our website.
Important Safety Instructions
1.This appliance has a self-adjusting dual-voltage (100V-240V). A switch is not needed to
convert the voltage. Simply attach a plug converter and the appliance will work once
plugged in.
2.Do not share the power supply with other high-powered electric appliances.
3.To reduce the risk of electric shock, do not immerse the appliance, the plug, or the power
cord in water or other liquids.
4.Do not leave the appliance unattended while it is in operation. Turn off the appliance when
children are close to it. Do not let elderly people use the appliance alone. Use the
appliance only for its intended purpose. For indoor use only.
5.Fill water to "MAX" level before using and observe the water level during use.
6.Do not operate the appliance if the power cord is damaged.
7.Do not insert any object into the steam openings.
8.Do not place the nozzle directly on the power cord while it is hot or plugged in.
9.Be careful about the steam spraying out from the nozzle. Do not direct steam at people or
animals, or use steamer on garments while they are being worn.
10..Steam only in a vertical motion. Do not use the steamer in a horizontal position or tilt
backwards, doing so may result in hot water discharge.
11.Turn off, unplug and allow the appliance to cool completely for at least 30 minutes
before draining the water tank.
12.Always turn off and unplug the unit before refilling, draining, moving, or when not in use.
13.Keep the appliance away from flammable materials and chemicals.
14. Do not fill the water tank with hot water or corrosive cleaning agents which could cause
damage. Distilled or filtered water is strongly recommended.
15.When in use, this appliance will spray hot steam from its steam nozzle. To avoid injuries,
do not aim the steam nozzle at people or pets.
16.This appliance is not intended to be used by children or other people whose physical or
mental capabilities prevents them from using the appliance safely.
17.Do not try to repair the appliance when is damaged. Contact the appliance manufacturer
or local service center for help.

2
Table of Contents
STRUCTURE........................................................................................................................................... 3
ADDING WATER TO THE STEAMER................................................................................................3
IRONING GUIDE.....................................................................................................................................4
CLEANING AND MAINTENANCE...................................................................................................... 6
TROUBLESHOOTING........................................................................................................................... 6

3
STRUCTURE
1.Steam Nozzle Upper Cover Capacity: 60ml
2.Steam Nozzle Lower Cover Power Consumption: 250W-265W
3.Indicating Light Voltage/Current: 100V-240V
4.Right Shell 50Hz/60Hz
5.Right Shell Gauge Steam Ready:≤ 150secs
6.Left Shell Continuous Usage: 10 minutes
7.Left Shell Gauge
8.Hardware Handle
9.Fabric Brush
ADDING WATER TO THE STEAMER
1.Please make sure the appliance is not plugged in. Pull out the plug before adding water
and cleaning the steamer.
2.Rotate the steam nozzle 90 degrees counterclockwise, take the steam nozzle out.(See
Fig.2)
3.Fill in water to the water tank until the water level reaches the mark "Maximum" on the
water gauge.(See Fig.3)
4.Then insert the steam nozzle into the main body, rotate it 90 degree clockwise to lock
the steam nozzle.(See Fig.4)

4
Caution
Using tap water in your garment steamer may cause build up in the water tank. We
recommend distilled water in order to prevent build up and prolong the life of your
steamer.
IRONING GUIDE
1.Add water into the tank before using the appliance.
2.Rotate the steam nozzle until is locked.
3.When using the steamer for the first time, it is recommended to let it operate for about 5
minutes before steaming clothes, then pull out the plug. When the steamer has
gradually cooled down, clean the container and re-add water to steam clothes.
4.Place the steamer up-right on a flat surface, plug it in, and the indicator light will light up.
5.Within 150 seconds, the streamer will be ready for use.
6.For best results, hold clothes taut and steam lightly in a vertical motion. Do not move the
steamer too quickly and do not lean or tilt the steamer over 85。, doing so may results in
spillage of hot water.(See Fig 5)
7.To prolong its lifespan, do not use your steamer without water. When there is little steam,
please pull out the plug and re-add water to the maximum water level.

5
Caution
1.When using the steamer make sure the water level does not exceed the maximum level.
Excess water may result in water leakage and water spraying.
2.Before disassembling the appliance, make sure the steamer has completely cooled
down (approximately 30 minutes).
INSTRUCTION FOR FABRIC BRUSH INSTALLATION AND USAGE
Caution
Do not install the Fabric Brush while steam is coming out from the steam nozzle. Install it
before operation or wait till the appliance cool down completely before installation.
CLEANING AND MAINTENANCE
1.The appliance has no maintenance costs. If the power cord is damaged or it does not
work normally, please return it to the service station for maintenance. Do not try to
disassemble or repair by yourself.
2.Please pull out the plug and wait until the appliance has totally cooled down before

6
cleaning it.
3.Remove the steam nozzle according to the above methods, and pour out the water
therein.
4.Do not place the appliance in water. Use a dry cloth to dry the steamer. No special
detergent is needed for cleaning.
5.Make sure the appliance is dry before storing or packaging.
6.This appliance is not intended to be used by children or other people whose physical
or mental capabilities prevents them from using the appliance safely.
7.The Fabric Brush can be cleaned with warm water.
TROUBLESHOOTING
FAQ
Reasons
Solutions
The appliance does not
spray out steam.
The indicator light does
not work.
The appliance is not plugged in
Connect the plug to the power
supply.
The household power fuse is off
or fused.
Check the power supply or ask
qualified electricians for help.
The steamer does not
spray out steam. But
the indicator light works.
The water in the tank has been
used up.
Add water.
Temperature controller works
for protection.
Add water to cool temperature
controller down before it works
The steam nozzle panel
has droplets.
Condensate water is produced
when working,
Disconnect the power supply and
turn on the steamer according to
the operation instructions to
remove condensed water.
Water spraying when
operating.
The water exceeds the tank's
maximum water level.
Pay attention to the amount
when adding water.
Wrong ironing operations.
Use it according to the operation
instructions.