SMART Board SMARTKart 3 pro User manual

www.Smartboard.tech
HOVERKART MANUAL
PRO
 Compatible with 6.5 inch, 8 inch, and 10 inch two-wheeled self-balance hoverboards.
 The SmartKart3 Pro comes with dual shock absorber for better balance, controlled
performance and for a more enjoyable experience.
 6 inch inflatable front tire which makes it great for off-road fun.

SmartKart3 adds a third wheel to your hoverboard. A new fun and dierent
way of transportaon that everyone can drive without having a constant fear
of falling. It is easy for any age to steer and operate. The SmartKart3 is
comfortable, versale and has many praccal uses. No more falling o when
the hoverboard hits a crack or bump in the pavement. Sing is far safer than
standing.
STEP 1
Separately put Four M8*40mm inserted into the hole of the pedal frame (see
Figure 1), then install 6 inch inatable re, M8 at washer, M8 shrapnel in
sequences, (see Figure 2), last secure with M8 lock nuts and ghten nuts using a
wrench (see Figure 3).
STEP 2
Direcon control lever: Separately put the Direcon control levers (Le & Right)
inserted into Base stand (see Figure 4), make sure the hole is in the right place
and secure with M6*40mm screws as well as M6 shrapnel, (see Figure 5). Then
secure with M8 lock nuts and ghten nuts using wrench (see Figure 6). (Should
look like Figure 7).
Figure 1 Figure 2 Figure 3
Figure 4
Figure 7
Figure 5
Figure 6
How to Assemble SmartKart3 Pro

STEP 3
Place the seat on the frame (see
Figure 8) The seat is respecvely
locked with 4*M6 screws on the
boom seat support (Figure 9).
STEP 4
Unclasp the "Quick-Release clamp" on Base stand (Figure 10), insert
assembled pedal frame (as completed in Step 1) into it and adjust length as
desired, (see Figure 11). Tighten "Quick-Release clamp" rmly (Figure 12 & 13)
STEP 5
Take the strap and aach it to the slit at the boom of the handle, (Figure 14).
Secure the strap around the hoverboard, (Figure 15). Turn on the hoverboard
aer the straps are secured to the hoverboard (Figure 16). Now, Get Set Go!
Figure 8 Figure 9
Figure 12
Figure 10 Figure 11 Figure 13
Figure 14 Figure 15 Figure 16
Maximum Length 99 cm
Minimum Length 72 cm
Maximum Width 57 cm
Maximum Height 45 cm
Net Weight 8 kg
Gross Weight 10 kg
Package size 51*44*29.5 cm
SmartKart3 Pro Parameters
Telescoping Length
Height
Width

Riding Instructions
FORWARD: Push both hand levers DOWN (together)
REVERSE or BRAKE: Pull both hand levers UP (together)
TURN RIGHT: Push left lever DOWN or pull right lever up
TURN LEFT: Push right lever DOWN or pull left lever up
FORWARD REVERSE
LEFT RIGHT
Imported and distributed by ARK Trading Inc. o/a Kartechs for SMARTBOARD
1207 Appleby Line, Suite I1030, Burlington, ON L7L5H9
WARNING
 Make Sure the environment and surrounding are safe for riding. Please make
sure all bolts are properly tightened and there are no loose parts before using
SmartKart3. It must be secured with provided Velcro straps and adjust Velcro
clamps properly to the width of the hoverboard pads. Make sure appropriate
tire pressure.
 MUST WEAR A HELMET, knee, elbow pads, wrist guard, exercise full caution
when driving, be prepared to stop.
 SMARTKART3 IS NOT FOR CHILDREN AGED UNDER 3 YEARS. Children
between age 3-13 years should be supervised. Do not use SmartKart3 if you
under the influence of Alcohol or if physically or mentally no able to control the
ride.
 ATTENTION !!! DO NOT RIDE OVER MAXIMUM SPEED LIMIT OF THE
HOVERBOARD. MOST HOVERBOARDS BEEP WHEN MAXIMUM SPEED IS
REACHED TO LET YOU KNOW YOU ARE GOING TOO FAST. Refer to
Hoverboard Instruction Manual for maximum riding speed limit as it varies from
10km/hr to 15km/hr depending on type of hoverboard and wheel size.