Smart Living Sani-T SAN-385 User manual

PLEASE READ INSTRUCTIONS BEFORE USING
AND SAVE FOR FUTURE REFERENCE
SAN-385
Sani-T Compact
Air Purifier

2
Model No. SAN-385
Power Rating 30 W
Voltage Rating 24 V DC
Noise (Max) 53 dB(A)
CADR (Clean Air Delivery Rate) 114 CFM (Cubic Feet/Minute)
Room Size 230-260 Sq. Ft.
Sensors 1 x Infrared Sensor
Display Indicators
5 x Touch Buttons for Functions
(Fan Speed, On/Off/Auto, Light
Mode, Filter, Timer), 1 x Air Quality
Indicator Color Ring
Features Touch Glass Control Panel
Product Size 8.66" Dia x 13.78" H
Net Weight 4.51 lbs. (6.38 lbs with Adapter)
PRODUCT SPECIFICATIONS

3
TO REDUCE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:
• Inspect the unit prior to use. Check power cord to ensure there is no
damage to insulation. If the unit shows any signs of being dropped or
damaged, do not plug in and contact the manufacturer.
• Always disconnect the power cord from electrical outlet before performing
any maintenance or replacing the filter.
• Never operate the unit without the filter installed.
• Designed for indoor use only. Do not attempt to use outdoors.
• Do not use the unit near water, on wet surfaces or in high humidity
environment. It should not be placed in/near a bathroom, shower, sauna,
or swimming pool
• Do not use the unit near heated surfaces. Keep power cord away from
heated surfaces.
• Place on flat stable surface. Keep unit upright at all times. Do not attempt to
use if the unit is not in upright position.
• Never touch any part of the appliance or plug/unplug the power cord with
wet hands.
• Never carry the unit by the power cord. Pick the unit up and carry by the
base to move it.
• Plug the power cord directly into electrical outlet. Do not use extension cord
as a power overload may cause over heating and risk of fire.
•Do not place the power cord under other appliances.
• This appliance is not intended for use by persons (including children) with
reduced physical, sensory or mental capabilities, or lack of experience and
knowledge, unless they have been given supervision or instruction
concerning use of the appliance by a person responsible for their
safety. Children should be supervised to ensure that they do not play
with the appliance
• To avoid overheating, do not cover the appliance.
• If the power cord is damaged, it must be replaced or repaired by the
manufacturer. Do not attempt to replace or repair the power cord.
• To reduce the risk of fire, keep textiles, curtains, or any other flammable
material a minimum distance of 3 feet from the air outlet.
• Keep the appliance away from flammable liquids and vapors.
• If there is a loose fit between the power cord plug and the electrical outlet
or the plug becomes very hot, the electrical outlet may need to be replaced.
Check with a qualified electrician to replace the electrical outlet.
WARNING !!!

4
PRODUCT OVERVIEW
Air outlet
Light Ring
Control Panel Interface
The SAN-385 Compact Air Purifier uses and infrared sensor to monitor
the air quality in the surrounding area.
Based on the reading by the infrared sensor, the SAN-385 will illuminate
the Air Quality Indicator Light to the color specific to the air quality.
The below chart shows the range of values for each color shown in the
Air Quality Ring:
RING COLOR: GREEN YELLOW RED
Air Quality = GOOD
< 50 AQI
ACCEPTABLE
50 – 100 AQI
POOR
> 100 AQI
Air Inlet
Power Inlet
Power Adapter Base/Filter Cover

5
LOCATION & SET UP
Place the unit upright on a dry, flat surface indoors. Do not place
too close to walls as this may affect the sensors and reduce the
performance of the unit. We recommend keeping the unit a minimum
of 8" away from walls.
Do not use in high humidity areas of the home such as bathrooms etc.
Do not cover or block the vents. The Air Intake holes on the base pull
air into the unit. The vent blades on top of the unit expel purified air.
Blocking the air flow in any direction will cause performance issues
and/or over heating.
Connect the Power Adapter into the power outlet on the bottom of the
unit. Plug power cord into electrical outlet.
8"
from
wall
8"
from
wall

6
FIRST USE
When you plug the unit into the electrical outlet, it will beep once to alert
you that it is receiving power.
Press the Power button and the unit will beep again confirming it is
now turned on; the Control Panel will illuminate.
Once turned on the infrared sensor will analyze the surrounding air.
When analyzing, the display may cycle through the colors on the Air
Quality Ring. Within approx. 20 seconds, the unit will complete the
analysis and display the air quality sensed on the Air Quality Ring.
If you do not press any buttons after turning the unit on,
it will begin operating in AUTO mode.
In most instances, leaving the unit in AUTO mode will be sufficient for
daily use. Our goal is to make it simple for you set it and forget it so you
can enjoy life and let the SAN-385 run in the background as needed.
In AUTO Mode, the fan speed will adjust itself based on the air quality:
• If the air quality is good, the Air Quality Ring will be GREEN and the fan
will run intermittently on low speeds as required.
• If the air quality is acceptable with a low amount of pollutant, the
Air Quality Ring will be YELLOW and the fan will run continuously
on medium speeds until the air improves.
• If the air quality is poor with a high amount of pollutants, the Air Quality
Ring will be RED and the fan will run continuously on high speeds until
the air improves.
• As the Air Quality improves, the color of the display ring will change
from RED to YELLOW to GREEN and adjust the fan speed accordingly.

7
THE CONTROL PANEL
AIR QUALITY RING
display
Illuminates GREEN,
YELLOW or RED
depending on
quality of the air
TIMER
button
Press to set Timer to the
desired number of hours after
which the unit will shut off
OR
Hold for 3 seconds to
turn off Timer
POWER
button
Press to turn the unit
ON OR Hold for 3 seconds
to turn the unit off
AUTO
display
Illuminates when unit
is in AUTO mode. If you cycle
through FAN SPEED, the Auto
will illuminate to let you know
you are back in AUTO mode
FAN SPEED
display
Indicates
current speed
of fan
LIGHT MODE
button
Allows you to turn off the day
time control panel display and
enter night mode. Each time you
press the button it will change
between these modes: low night
light, medium light night, bright
night light, day time display
FILTER LIFE
button
Illuminates in RED
when it is time to
change the filter
OR
Hold for 3
seconds to reset
the Filter Life
indicator after
installing new
filter.
TIMER
display
Indicates current
timer selected

8
CLEANING & MAINTENANCE
IMPORTANT! Always unplug the purifier from the
electrical outlet before cleaning and/or changing the filter.
Cleaning the Air Intake
We recommend you clean this regularly for optimal performance. If not
cleaned regularly, it may reduce the performance of the air purifier.
Remove the Base/Filter cover from bottom of purifier and take out the
filter. Use a handheld vacuum attachment or a dry, soft cloth to remove
any dust/dirt particles from the air intake holes.
Filter Maintenance
The filter life is 3,000 hours. If used in AUTO mode the filter will last
approx. 4 months. When the remaining filter life reach 10%, the Filter Life
button will display RED to alert that it needs to be replaced.
For optimal performance, we recommend replacing the filter within 2
weeks of the Filter Life button turning RED.
TROUBLESHOOTING
The unit is plugged in but not running:
•Make certain that the electrical outlet is operational.
• Press the power button to turn the unit on.
The unit is plugged in AND turned on but not running:
• Is the filter installed? The unit will not run without a filter.
The fan is running on high in AUTO mode for extended period:
• Ensure you have cleaned the Air Intakes from the inside
(See Cleaning section).
• Ensure the windows and doors to outside are closed. Turn unit off while
the windows and doors are open. Once closed, resume use of unit.
•Check if there are unsealed chemical containers nearby. Example:
materials like paints, disinfectants, nail polish remover and other similar
items with strong odors (VOCs) will cause the unit to run high.
FILTER LIFE BUTTON
STATUS COLOR:

9
REPLACING THE FILTER
LOCKED UNLOCKED
We recommend ordering a new filter when there is approx. 25% life left
in the current filter. When the filter needs to be replaced, the Filter Life
button will illuminate in RED to indicate a replacement filter is needed.
Unplug the unit from the electrical outlet and gently place it upside
down to access the filter cover on the bottom of the unit.
When the filter cover is locked, the arrow will be pointing to the FULL
CIRCLE. Turn the filter cover to the left to unlock it. The arrow will point
to the OPEN CIRCLE when unlocked.
Once the filter cover is unlocked. Lift off of the cover. Reach in and
remove the filter. Insert new filter in the same direction (opening of
filter should be in the middle of purifier and handle of the filter should
be at the bottom where the filter cover is).
Replace the filter cover and turn to the right to lock. Ensure the cover
is locked before turning the filter back over to its feet. Plug the unit
back into the electrical outlet and turn the power on.
IMPORTANT! Press and hold the Filter button for 3 seconds to
reset the status for the new filter.
FILTER LIFE BUTTON
STATUS COLOR:
WHITE Filter is OK
RED Change the
filter

10
REPLACING THE FILTERFREQUENTLY ASKED QUESTIONS
Does this unit emit ozone?
No, Sani-T air purifiers do not emit any ozone.
How often do I need to change the filter?
The filter life is 3,000 hours. If used in Auto Mode, the filter will last
approx. 4 months
How do I know when I have to change the filter?
The Filter Life button will turn RED to alert you that it needs to be replaced.
Can I wash the filter?
No. The filter cannot be washed. It must be replaced with a new filter.
Where can I buy replacement filters?
We have a subscription service available to ensure you never run out.
You can subscribe for automatic shipments at 3, 6 or 12 month intervals
depending on how often you need additional filters. Contact our customer
service team for information or visit: www.smartlivinghg.com/parts
You can also purchase replacement filters through the same retailer as the
purifier or buy single replacements via our customer service.
How often should the unit be cleaned?
This will depend on the environment but we recommend checking it month-
ly and cleaning as needed.
What the number for the AQI Color mean?
The numbers in this display are Air Quality Index levels as determined by
the EPA (Environmental Protection Agency). Below is a simple summary.
AQI Air Status
0 - 50 Air quality is good for everyone
51 - 100 Acceptable for most but may cause minor irritation for
highly sensitive individuals
101 - 150 Acceptable for most but unhealthy for sensitive individuals
151 - 200 Unhealthy for everyone
201 - 300 Very unhealthy for everyone
300+ Hazardous for everyone

11
In order to register your warranty with us, please list out the information in
the warranty box below and email the completed information to
[e-mail]
Or you can register online at:
smartlivinghg.com/registration
Smart Living Home & Garden offers a 1 Year Limited Manufacturer’s
Warranty from the original date of purchase on products shipped from
authorized distributors and retailers. The warranty covers products
which are properly used and regularly maintained as required. If the
product fails due to a defect in material or workmanship, we will replace
the defective parts or unit free of charge. Please unpack and inspect the
entire product upon receipt. Report any broken or missing pieces within
five (5) business days of receipt to our customer service department and
we will provide replacement parts free of charge. Please do not discard
any damaged parts until instructed to do so by our customer service
department. Warranty does not cover filters which need to be replaced
on a regular basis.
Name
Email
Model No. SAN-385
Product Name Sani-T Compact Air Purifier
Purchase Date
Order Number
Retailer Purcased From
CLEANING & MAINTENANCEWARRANTY INFORMATION

Smart Living Home & Garden
Sani-T is a Smart Living Home & Garden brand ©2021 V21.0
Telephone: [phone]
Email: customerser[email protected]om
Web: www.smartlivinghg.com
For assistance with this product,
please reach out to our customer service team.
Most issues can be easily resolved over the phone or via email.
Tel: [phone] (Mon-Fri 9am – 5pm EST)
Email: [e-mail]
You can also visit our website to view the FAQs,
video walk throughs or to order replacement filters.
Website: https://smartlivinghg.com
FAQs: https://smartlivinghg.com/faq
Parts: https://smartlivinghg.com/parts