Smart view DS-2012F User manual

HDTV
SPLITTER
(DS-2012F)
1 In 2 Out
(DS-2014F)
1 In 4Out
USER MANUAL
DS-2012F / DS-2014F
Package Contents-
§1 Smart View DS-2012F or DS-2014F HDTV Splitter
§1 user manual
§1 power adapter DC 7.5V 1.5A
§2 rack rails, 8 screws for DS-2014F only
Any thing missed, please contact with your vendor.
Introduction
Through the HDTV (High Definition Television) splitter
DS-2012F, DS-2014F, you can use one PC/DVD player to
display identical image on 2,4 LCD monitors or projectors
or HDTV.
HDTV splitter is ideal for:
§Test bench facilities
§Data Center
§Help desks
Features
§Use PanelLink digital technology.
§Compliant with the specification of DVI 1.0.
§Support high-resolution display up to UXGA
(25-165MHz), 480p, 480i, 720p, 1080i.
§Support HDCP.
§Can be cascaded.
§1U rack design for DS-2014F.
Specifications
Function DS-2012F DS-2014F
Video Input Connector
(DVI Female) 11
Video Output Connector
(DVI Female) 24
Max. Resolution 1600x1200 60Hz
Cable Distance
(Device to Monitor) 10 m (Max.)
Signal Type Standard DVI Signal
Power Adapter (Min.) DC 7.5V 1.5A
Housing Metal
Weight 475 g 975 g
Dimensions (LxWxH) mm 153x75x42 269x104x42
-1-
Technical Specifications
Input/Output Signal
Pin # Signal Pin # Signal
1T.M.D.S Data 2-16 Hot Plug Detect
2T.M.D.S Data 2+ 17 T.M.D.S Data 0-
3T.M.D.S Data 2/4 Shield 18 T.M.D.S Data 0+
4T.M.D.S Data 4-19 T.M.D.S Data 0/5 Shield
5T.M.D.S Data 4+ 20 T.M.D.S Data 5-
6DDC Clock 21 T.M.D.S Data 5+
7DDC Data 22 T.M.D.S Clock Shield
8Analog Vert. Sync 23 T.M.D.S Clock+
9T.M.D.S Data 1-24 T.M.D.S Clock-
10 T.M.D.S Data 1+
11 T.M.D.S Data 1/3 Shield C1
Analog Red
12 T.M.D.S Data 3-C2
Analog Green
13 T.M.D.S Data 3+ C3
Analog Blue
14 +5V Power C4
Analog Horz Sync
15 GND C5
Analog Ground
FRONT VIEW
1. Power LED
-2-

REAR VIEW
1.Input Power Jack
2.“DVIIn” Port
3.“DVI Out” Port
*There are 2/4 out ports for DS-2012F / DS-2014F.
Installation
1.Turn off the PC/DVD player and monitors.
2.Connect the DVI male extension cable between the PC
and the “DVIIn” port of splitter.
3.Connect the DVI male/female extension cables between
the monitors and the “DVI Out” ports of splitter.
4.Connect the power cord and turn on the splitter.
5.Turn on the PC/DVD player and monitors.
Note:
§If you install the DDC monitor for the splitter, the rest of
monitors must be the same resolution as the DDC
monitor.
§When use this product, we suggest user connect monitor
from “DVI out 1”first. For protection HDCP purpose, it
does not work if user connect from “DVI out 2 or 3 or 4”
first.
Operation for cascade:
1.The function to display identical image on more
monitors, you have to attach another splitter.
2.Connect the DVI male/female extension cable
between the former splitter of the “DVI Out 1” port and
the latter splitter of the “DVI In” port.
Note:
Even though you are allowed to cascade the splitter with
varied ports, the image might become unstable if cascade
too many tiers of splitters.
-3-
P.S.: The example cascades the 2 and 4 ports splitters;
however, you can cascade the HDTV splitter with
demanded port.
Trademarks:
All the companies, brand names, and product names
referred to this manual are the trademarks or
registered trademarks belonging to their respective
companies.
-4-