Panasonic AJ-YDX30G User manual

Video Encoder Board/ビデオエンコーダーボード
Operating Instructions/取扱説明書
SS0211AT1042 -FJ
Printed in Japan VQT3L98-1
Model No. AJ-YDX30G
Before operating this product, please read the instructions carefully and
save this manual for future use.
このたびは、“パナソニック製品”をお買い上げいただき、まことにありがとうご
ざいました。
_取扱説明書をよくお読みの上、正しく安全にお使いください。
_保証書は、｢お買い上げ日・販売店名｣などの記入を確かめ、取扱説明書とともに
大切に保管してください。
ENGLISH
日
本
語
GPL/LPGL
AJ-YDX30G(VQT3L98)_EJ.book 1 ページ ２０１２年４月１２日 木曜日 午後５時３７分

E-1
C-Tick mark for Australia and New Zealand
N52
zQuickTime and the QuickTime logo are
trademarks or registered trademarks of Apple
Inc. and are used in accordance with the
license.
Note concerning illustrations in these
instructions
zIllustrations (camera-recorder, menu screens,
etc.) in these operating instructions differ
slightly from the actual camera-recorder.
Terminology
zBoth SD Memory Cards and SDHC Memory
Cards as referred to as ìSD Memory Cardsî in
these operating instructions.
zMemory cards with the “P2” logo (optional AJ-
P2C064X, etc.) are referred to as “P2 cards” in
these operating instructions.
zVideo that is created during a single recording
operation is referred to as a ìclipî in these
operating instructions.
This product is licensed under the AVC patent
portfolio license for the personal and non-
commercial use of a consumer to (i) encode
video in compliance with the AVC Standard
(“AVC Video”) and/or (ii) decode AVC Video that
was encoded by a consumer engaged in a
personal and non-commercial activity and/or was
obtained from a video provider licensed to
provide AVC Video. No license is granted or shall
be implied for any other use. Additional
information may be obtained from MPEG LA,
LLC. See http://www.mpegla.com.
Software information
1. This product includes GNU General Public License
(GPL) and GNU Lesser General Public License
(LGPL) software. Customers are granted permission
to acquire, modify, and redistribute the source code
of these software
Details on the GPL/LGPL can be found on the
supplied CD-ROM under the LDOC folder
(original English text only). For details on
acquiring the source code, visit the following
website.
http://panasonic.biz/sav/
Do not contact Panasonic with questions
regarding the content of the acquired source
code.
CAUTION:
These servicing instructions are for use by qualified service personnel only. To reduce the risk of fire or
electric shock do not perform any servicing other than that contained in the operating instructions
unless you are qualified to do so.
z
To avoid fire, electric shock, damage or malfunction to your equipment, do not disassemble or remodel.
zImmediately stop using the card if you notice smoke, strange smells or sounds, or if liquid gets into
the card.
EEE Yönetmeliğine Uygundur.
EEE Complies with Directive of Turkey.
ENGLISH
AJ-YDX30G(VQT3L98)_EJ.book 1 ページ ２０１２年４月１２日 木曜日 午後５時３７分

E-2
ENGLISH
Contents
Caution..................................................................................................... E-3
Overview .................................................................................................. E-3
Features ................................................................................................... E-3
Supported models .................................................................................... E-3
Bundled items .......................................................................................... E-3
Installation in AJ-HPX3100G.................................................................... E-4
Proxy configuration .................................................................................. E-6
Recording proxy data ............................................................................... E-7
Recording on SD memory cards.............................................................. E-8
Checking proxy data .............................................................................. E-10
Error displays regarding recording of proxy data ................................... E-12
Specifications ......................................................................................... E-14
AJ-YDX30G(VQT3L98)_EJ.book 2 ページ ２０１２年４月１２日 木曜日 午後５時３７分

E-3
Caution
zDo not touch this product with wet hands.
zDo not drop this product or subject it to strong shock.
zAvoid touching the product components and board pattern. (Follow these precautions to protect
against damage from electrostatic shock.)
Overview
The AJ-YDX30G (hereafter “this board”) is a video encoder board for a memory card camera recorder
(hereafter “P2 cam”).
If proxy data cannot be recorded even when this board is installed correctly, then firmware update on
the main unit may be necessary.
English: http://pro-av.panasonic.net/
Features
Installation of this board enables recording of high resolution proxy video.
Material filmed with the P2 cam can be made into compressed data files and recorded in an area
separate from the material.
Supported formats for video recording include MPEG4 as well as the high resolution H.264/AVC, and
for audio recording, AAC as well as uncompressed audio (LPCM) are supported.
For file formats, selection of the traditional MP4 format is also possible in addition to the MOV format
that allows non-linear editing. An audiovisual file and a real-time metadata file (time code, user’s bit and
UMID information) can be recorded simultaneously in a P2 card and an SD memory card.
Filmed material can be recorded as data files of a smaller size than the original materials, allowing
checking of clips or editing to be done effectively.
Supported models
Memory card camera recorder: AJ-HPX3100G
Bundled items
2.6 mm screws a4
AJ-YDX30G(VQT3L98)_EJ.book 3 ページ ２０１２年４月１２日 木曜日 午後５時３７分

E-4
ENGLISH
Installation in AJ-HPX3100G
1Make sure that the power of AJ-HPX3100G
is turned OFF. Confirm that there is no
battery, or no input to the DC IN terminal.
2 Remove the two screws (A: 3.0 mm diameter black
screws) from the bottom of the AJ-HPX3100G.
3Remove six screws (A) on the left side
viewed from the front of the AJ-HPX3100G,
and remove the L side panel. Be careful not
to put load on the wires or connectors when
you remove the L side panel.
4Remove one screw (B: 2.6 mm diameter
silver screw) from the inside of the left side.
5Remove five screws (A) and four screws (C:
2.6 mm diameter black screws) on the right
side viewed from the front of the AJ-
HPX3100G, and then remove the R side
panel. Be careful not to put load on the wires
and FFC when you remove the R side panel.
6Remove the four screws (B) mounted on the
PB COVER.
CAUTION:
These servicing instructions are for use by qualified service personnel only. To reduce the risk of fire
or electric shock do not perform any servicing other than as directed in the operating instructions
unless you are qualified to do so.
Screws (A)
Screws
(A)
Screws (B)
Wire bundle
Connectors
Screws (C)
Screws (A)
PB
COVER
Screws
(B)
FFC
Wire bundle
FFC
AJ-YDX30G(VQT3L98)_EJ.book 4 ページ ２０１２年４月１２日 木曜日 午後５時３７分

E-5
7Remove one screw (B), and first remove the
INT CONNECT board, then remove the
BACKEND board. At this time, be careful not
to touch the side contacts.
8Insert the connector of this board into the
connector of the BACKEND board removed
in 7.
9Fasten the BACKEND board and this board
with four screws (supplied).
10 Insert the BACKEND board into the original
position, and fasten with the screw (B) at
the position removed in step 4.
11 Insert the INT CONNECT board into the
original position, and fasten with the screw
(B) at the position removed in step 7.
When inserting these boards, do so slowly
so that they are inserted straight without
tilting. Also be careful not to pinch cables.
12 Return the PB COVER to the original
position, and fasten with the screws (B) at
the positions removed in step 6.
13 Return the side panel to the original
position, and fasten with the screws (A and
C) at the positions removed in steps 2, 3,
and 5.
<Notes>
zBe careful not to put load on the wires or
connectors when you attach the L side
panel.
zWhen you attach the R side panel,
handle the cords as shown below.
<Note>
Use the +No.2 screwdriver for removing and
attaching of the screws (A), and +No.1
screwdriver for the screws (B) and (C).
INT CONNECT board
BACKEND board
Screws (B)
Side contacts
Connectors Side contacts
BACKEND board
This board
Screws (supplied)
If the boards are inserted tilted, then the
camera recorder may have recording problems
etc.
AJ-YDX30G(VQT3L98)_EJ.book 5 ページ ２０１２年４月１２日 木曜日 午後５時３７分

E-6
ENGLISH
Proxy configuration
Configuration menu
To record proxy data with the P2 cam, perform
configuration on the <PROXY SETTING> screen
in the SYSTEM SETTING page of the
configuration menu.
When this board is installed in the P2 cam, the
following configuration menu items are enabled.
PROXY SETTING screen
is the factory setting mode.
zProxy data cannot be recorded in the following
modes even if the REC MEDIA item is set to
“P2” or “P2&SD”.

INTERVAL REC (including ONE SHOT REC)
LOOP REC
z
In ONE CLIP REC mode, when a clip can be
recorded combined with the previous clip (when
“1
¢ CLIP” is displayed), the proxy function
cannot be set. Close the menu once, hold down
the STOP button for about 2 seconds to end
clip consolidation, and try again.
zChanges may occur to the PROXY SETTING
menu when using a P2 camera with this board
loaded to read SD memory card data written
from the <SD CARD READ/WRITE> screen of
the FILE page in the SETTING MENU of a P2
camera that does not have this board loaded.
Item/
Data
storage
Variable
range Remarks
REC MEDIA OFF
P2
P2&SD
Select media for proxy data
recording.
OFF: No proxy data is
recorded.
P2: Proxy data is
recorded on the P2
card.
P2&SD :Proxy data is
recorded on both the
P2 card and the SD
memory card.
-CUF-
REC MODE
(HD)
STD 2CH MP4
LOW 2CH MOV
HQ 2CH MOV
HQ 4CH MOV
SHQ 2CH MOV
Specify the recording mode
of proxy data recording. (HD
mode only)
For details of each mode,
see "Recording modes and
recording signals (video
and audio)" (page 7).
-CUF-
REC MODE
(SD)
STD 2CH MP4
LOW 2CH MOV
Specify the recording mode
of proxy data recording. (SD
mode only)
For details of each mode,
see "Recording modes and
recording signals (video
and audio)" (page 7).
-CUF-
TC SUPER OFF
UPPER
LOWER
Specify an option for
superimposing the time
code display on the video
recorded as proxy data.
OFF: Time code display is
not superimposed on
the recorded video.
UPPER:
Time code display is
superimposed on the
upper area of the
recorded video.
LOWER:
Time code display is
superimposed on the
lower area of the
recorded video.
-CUF-
Item/
Data
storage
Variable
range Remarks
PROXY DISP OFF
ON
Select whether to display a
message on the Viewfinder
and the LCD monitor when
starting proxy data
recording.
OFF: No message is
displayed.
ON: A message is
displayed.
<Notes>
zIt is also displayed on VF
INDICATOR screen.
z
Write/read cannot be done
on the SD Memory Cards
unless VF MENU R/W item
is set to ON in the <SD
CARD R/W SELECT>
screen of FILE page.
-CUFR
STREAMING
MODE
OFF
RTP
HTTP
Selects the mode for the
streaming function.
OFF: Stops the streaming
function.
RTP: Selects RTP mode.
HTTP: Selects HTTP live
streaming mode.
<Note>
This is displayed only when
the wireless LAN function is
enabled. For further details,
refer to the User Guide of
the Wireless LAN Upgrade
Software Key
(AJ-SFU3100G, optional).
-CUF-
AJ-YDX30G(VQT3L98)_EJ.book 6 ページ ２０１２年４月１２日 木曜日 午後５時３７分

E-7
Checking settings
You can confirm the menu values of REC
MEDIA, REC MODE, and TC SUPER on the
FUNCTION screen of MODE CHECK by pulling
MARKER SEL or MODE CHK/MENU CANCEL
switch of the P2 cam toward you 3 times.
Checking version information
The following versions are displayed on the
<DIAGNOSTIC> screen in the MAINTENANCE
page of the configuration menu.
Recording modes and recording signals (video and audio)
Recording proxy data
Set the REC MEDIA item to “P2” or “P2&SD” and
then press the REC button to start proxy data
recording together with material recording.
To display the recording information of proxy
data on the Viewfinder of the P2 cam, select the
PROXY DISP item from the P2 cam menu, the
<PROXY SETTING> screen of the SYSTEM
SETTING page, or the <VF INDICATOR> screen
of the VF page, and set it to “ON”.
When recording is started, “PROXY REC P2” or
“PROXY REC P2&SD” is displayed.
Item/
Data
storage
Variable
range Remarks
PROXY FPGA Displays the FPGA version
of the proxy board.
-----
PROXY SOFT Displays the software
version of the proxy board.
-----
Recording
modes
Video Audio
Resolution Codec Bit rate Codec Number of
channels
Bit rate per
channel
STD 2CH MP4 320
a 240
(QVGA)
MPEG-4
Simple Profile 1500 kbps AAC-LC 2CH 64 kbps
LOW 2CH MOV
1080i mode
480
a 270
480-59.94i mode
352 a 240
(SIF_NTSC)
576-50i mode
352 a 288
(SIF_PAL)
H.264
Baseline
Profile
800 kbps AAC-LC 2CH 64 kbps
HQ 2CH MOV 640
a 360 H.264
High Profile 1500 kbps AAC-LC 2CH 64 kbps
HQ 4CH MOV 640
a 360 H.264
High Profile 1500 kbps AAC-LC 4CH 64 kbps
SHQ 2CH MOV 960
a 540 H.264
High Profile 3500 kbps Linear PCM 2CH 768 kbps
AJ-YDX30G(VQT3L98)_EJ.book 7 ページ ２０１２年４月１２日 木曜日 午後５時３７分

E-8
ENGLISH
Recording on SD memory cards
To record proxy data, use Panasonic SD Memory
Cards or SDHC Memory Cards with a class
specification of class 2 or higher.
For the latest information not available in the
Operating Instructions, visit the support desk at
the following website.
Make sure to format the SD memory card on the
P2 cam when recording the proxy data on to the
SD memory card.
zFor more information about handling of SD
memory cards, see the P2 cam’s instruction
manual.
Checking an SD Memory Card
1. Insert an SD memory card into the P2 cam.
2. Press the THUMBNAIL button to display the
thumbnail screen.
3. Press the THUMBNAIL MENU button.
4. Select PROPERTY >DEVICES >SD
CARD, using the cursor buttons and the SET
button.
zFormat status is displayed under “SD
STANDARD” item.
If “NOT SUPPORTED” is displayed, format the
card using the P2 cam.
zCheck the remaining recording time of proxy
data with the PROXY REM item.
Remaining of the SD memory card (PROXY
REM) that is displayed can be a guideline to
the recording remainder of the proxy, but it
may be different from the actual available
space. Recordable time may be greatly small
compared to the available space when short
recording is repeated.
Also, it will display “999min” if the remainder is
exceeding 999 min.
When proxy data is not recorded on the SD
memory card, the remaining recording time is
not displayed.
zCheck the number of clips recorded on the SD
memory card by selecting the NUMBER OF
CLIPS item.
If the recorded number of clips exceeds 1,000,
proxy data recording will not be performed,
even if the SD memory card still has free space.
zShot mark and text memo cannot be added to
the clips on the SD memory card.
zProxy data recorded on the SD memory card
will not be deleted by deletion of the clips
recorded on the P2 card from the thumbnail
screen of the P2 cam.
zThe proxy data cannot be recorded onto the
SD memory card with version upgrade data for
the P2 cam.
<Notes>
zYou can also check the remaining recording
time on the MODE CHECK screen of the
Viewfinder or the LCD monitor while recording
on the SD memory card.
zWhen proxy data cannot be recorded on the
SD memory card even when the REC MEDIA
item on the <PROXY SETTING> screen of the
configuration menu is set to P2&SD, “SD
CARD WRITE ERR” is displayed when
recording is started. At this time, check the SD
memory card. See "Error displays regarding
recording of proxy data" (page 12) for details.
zData erased by formatting cannot be restored,
so be sure to perform the format after first
checking the data.
English: http://pro-av.panasonic.net/
AJ-YDX30G(VQT3L98)_EJ.book 8 ページ ２０１２年４月１２日 木曜日 午後５時３７分

E-9
Formatting an SD memory card
1. Insert an SD memory card into the camera
recorder.
2. Press the THUMBNAIL button to display the
thumbnail screen.
3. Press the THUMBNAIL MENU button.
4. Select OPERATION >FORMAT >SD
CARD >YES, using the cursor buttons and
the SET button.
This completes formatting of the SD memory
card.
Approximate recording time for
proxy data recording
（Reference values when Panasonic bland SD memory
cards or SDHC memory cards are used for continuous
recording. Actual recording time depends on the kind of
scenes and the number of clips.)
PROXY Recording in ONE CLIP REC
mode
PROXY recording is also possible in ONE CLIP
REC mode. As PROXY data is also similarly
compiled into a combined clip, the P2 viewer can
also handle this data as a single clip. However,
note the following points when recording PROXY
data to a SD memory card.
zIf the SD memory card is removed and
replaced while combining to the clip, the
PROXY is not recorded to the next SD
memory card until the clip stops being
combined. Check that there is sufficient space
and also the number of files (recordable up to
a maximum of 1000 clips) before use. In the
event that the SD memory card is replaced
while combining, continue recording the
PROXY by pressing and holding the STOP
button for about 2 seconds to stop combining
and to start recording to a new clip.
zIf the SD memory card is stopped while
recording, the PROXY data will not match the
clip data recorded to the P2 card and will be
incomplete.
zThe parts of PROXY setting menu are
restricted when combining to the clip. Press
and hold the STOP button for about 2 seconds
to stop combining to the clip when switching
this menu.
Recording
modes
Total
recording
rate
Recording
time
(for 1GB)
STD 2CH MP4 Approx.
1650 kbps
Approx.
78 minutes
LOW 2CH MOV Approx.
950 kbps
Approx.
135 minutes
HQ 2CH MOV Approx.
1650 kbps
Approx.
78 minutes
HQ 4CH MOV Approx.
1780 kbps
Approx.
72 minutes
SHQ 2CH MOV Approx.
5060 kbps
Approx.
25 minutes
AJ-YDX30G(VQT3L98)_EJ.book 9 ページ ２０１２年４月１２日 木曜日 午後５時３７分

E-10
ENGLISH
Checking proxy data
_indicator is displayed for a clip of material
that incorporates proxy data.
_The details of recorded proxy data can be
checked from the properties of the clip.
For operation methods, see "Checking
detailed information of proxy data" (page 11).
_Proxy data is recorded on a P2 card and/or to
an SD memory card as an audiovisual file and
a real-time metadata file.
Audiovisual file:
XXXXXXXX.MP4
or,
XXXXXXXX.MOV
Real-time metadata file:
XXXXXXXX.BIN
Time code, user’s bit and UMID
information are recorded for each frame.
Check the proxy data using the P2 viewer.
You may not be able to check depending on
the version of the P2 viewer.
For information on the P2 viewer, please visit:
English http://pro-av.panasonic.net/
<Note>
Some P2 devices handle clips with proxy data
recorded by installing this board as unknown
clips. Therefore (unknown clip indicator) is
displayed on thumbnails and the following
operations are disabled. (Excluding STD, 2CH,
and MP4 modes.)
zDELETE
zREPAIR CLIP
zRE-CONNECTION
zCOPY
zEXCH.THUMBNAIL
zAddition or deletion of TEXT MEMO and
SHOT MARK
Nevertheless, playback is possible.
Also, these devices display a clip with proxy
data, which is made of multiple clips
consolidated, and is displayed as individual
incomplete clips (with mark). (Excluding
STD, 2CH, and MP4 modes.)
AJ-YDX30G(VQT3L98)_EJ.book 10 ページ ２０１２年４月１２日 木曜日 午後５時３７分

E-11
Checking detailed information of
proxy data
Operation methods and panels may be different
depending on the model or version of the P2
cam.
1. Press the THUMBNAIL button.
The thumbnail screen is displayed on the
LCD monitor.
2. Press the THUMBNAIL MENU button, and
from the thumbnail menu, select PROPERTY
>CLIP PROPERTY.
A screen like the following will be displayed,
then place the pointer on “PROXY” using the
cursor buttons.
3. Press the SET button.
Details of proxy data like the following will be
displayed.
Format:
Displays the file format of recorded data.
Video codec:
Displays the video codec information of
recorded data.
Video frame rate:
Displays the video frame rate information
of recorded data.
Video bit rate:
Displays the video bit rate information of
recorded data.
Video resolution:
Displays the video resolution of recorded
data.
Aspect ratio:
Displays the aspect ratio of recorded data.
TC super:
Displays whether TC (time code) display is
superimposed on recorded video.
Audio codec:
Displays the audio codec information of
recorded data.
Audio bit rate:
Displays the audio bit rate information of
recorded data.
Audio sampling:
Displays the audio sampling rate
information of recorded data.
Number of audio channels:
Displays the number of audio channels of
recorded data.
AJ-YDX30G(VQT3L98)_EJ.book 11 ページ ２０１２年４月１２日 木曜日 午後５時３７分

E-12
ENGLISH
Error displays regarding recording of proxy data
If an error occurs during proxy data recording, refer to the following for the appropriate action.
Error display
(Viewfinder and LCD monitor) Operation and causes Action
PROXY BOARD ERROR
or,
PROXY REC WARNING
Recording of the proxy data will stop, but
recording of the material will continue.
zProblem in this board
(PROXY BOARD ERROR)
zProblem in proxy data
(PROXY REC WARNING)
zIf an error occurs in recording the proxy
data, proxy data in the recording are
processed as follows.
P2 data recorded on the P2 card is
deleted.
Proxy data recorded on the SD
memory card cannot be restored.
The proxy data is not recorded correctly.
Check the playback of the record after
turning off the power of the P2 cam once
and turning it on again.
NEAR END（SD）Recording of the material and proxy
data continues.
zRemaining recording space of the SD
memory card is low. (As a guide, less
than about 1 minute)
Insert a new SD memory card after
recording ends.
EOM（SD）Recording of the proxy data to the SD
memory card stops, but the recording to
the P2 card continues.
zSD memory card is full.
Insert new SD memory card after the
recording is completed.
zThe proxy data recording to the SD
memory card will be deleted.
To restore the deleted proxy data, select
the clip on P2 card, and copy it onto the SD
memory card (see page 13).
SD CARD WRITE ERR Recording of the proxy data will stop,
but recording of the material will
continue.
Displayed when the REC MEDIA item on
the <PROXY SETTING> screen of the
configuration menu is set to P2&SD, but
proxy data cannot be recorded on the SD
memory card.
_
Message is displayed at the start of recording
SD memory card formatted in an
unsupported format.
SD memory card contains more than
1,000 recorded clips.
Proxy data is not recorded on the SD
memory card, but it is recorded on the
P2 card.
_Message is displayed during recording
SD memory card removed during
recording.
Error occurs during recording on the
SD memory card.
Check the status of the SD memory card,
and insert another recordable card (see
page 8).
NO SD CARD
or,
SD CARD PROTECTED
Proxy data is not recorded on the SD
memory card, but it is recorded on the
P2 card.
zNo SD memory card is inserted.
(NO SD CARD)
zThe SD memory card is protected.
(SD CARD PROTECTED)
Check the status of the SD memory card.
AJ-YDX30G(VQT3L98)_EJ.book 12 ページ ２０１２年４月１２日 木曜日 午後５時３７分

E-13
About copying proxy data to SD Memory Cards
Copying clips to an SD memory card
1. Press the THUMBNAIL button to display the thumbnail
screen.
2. Position the pointer over the clips to be copied using the
cursor buttons, and press the SET button.
3. Press the THUMBNAIL MENU button.
4. Select OPERATION >COPY >SD CARD >YES,
using the cursor buttons and the SET button.
<Notes>
zWhen “EOM (SD)” is displayed and the proxy data being
recorded onto the SD Memory Cards is deleted, you can
restore the deleted proxy data by copying the proxy data
from the P2 Cards by performing this operation.
zThe material is not copied.
AJ-YDX30G(VQT3L98)_EJ.book 13 ページ ２０１２年４月１２日 木曜日 午後５時３７分

E-14
ENGLISH
Specifications
Video encoder board
Dimensions (W a H a D)
Approx. 135 mm
a 18 mm a 52 mm
(Approx. 5-5/16 inches a
11/16 inches
a 2-1/16 inches)
(excluding fittings)
Mass: Approx. 52 g (0.11 lb)
File format:
MP4 (ISO/IEC14496 standard)
MOV (QuickTime format)
Video compression format:
MPEG4 Simple Profile
H.264/AVC Baseline Profile
H.264/AVC High Profile
Audio compression format:
AAC-LC
Linear PCM
Number of channels:
Weight and dimentions when shown are
approximately. Specifications are subject to
change without notice.
Recording
modes File format
VIDEO
Resolution Codec Framerate Bit rate
STD 2CH MP4 MP4 320
a 240
(QVGA)
MPEG-4
Simple Profile
30 fps/
24 fps/
25 fps
1500 kbps
LOW 2CH MOV MOV
1080i mode
480
a 270
480-59.94i mode
352 a 240
(SIF_NTSC)
576-50i mode
352 a 288
(SIF_PAL)
H.264
Baseline Profile 800 kbps
HQ 2CH MOV MOV 640
a 360 H.264
High Profile 1500 kbps
HQ 4CH MOV MOV 640
a 360 H.264
High Profile 1500 kbps
SHQ 2CH MOV MOV 960
a 540 H.264
High Profile 3500 kbps
Recording
modes
AUDIO
Codec Number of
channels
Bit rate per
channel
Sampling
frequency
STD 2CH MP4 AAC-LC 2CH 64 kbps 24 kHz
LOW 2CH MOV AAC-LC 2CH 64 kbps 48 kHz
HQ 2CH MOV AAC-LC 2CH 64 kbps 48 kHz
HQ 4CH MOV AAC-LC 4CH 64 kbps 48 kHz
SHQ 2CH MOV Linear PCM 2CH 768 kbps 48 kHz
AJ-YDX30G(VQT3L98)_EJ.book 14 ページ ２０１２年４月１２日 木曜日 午後５時３７分

J-1
zQuickTimeおよびQuickTimeロゴはライセン
スに基づいて使用されるApple Inc.の商標ま
たは登録商標です。
本書内のイラストについて
zカメラ本体、メニュー画面などのイラストは、
実際とは異なることがあります。
用語について
zSDメモリーカード、SDHCメモリーカード、
どちらもSDメモリーカードと記載していま
す。
z「P2」ロゴがついたメモリーカード（別売の
AJ-P2C064XGなど）を「P2カード」と記載
しています。
z1回の記録動作により作成された映像を「ク
リップ」と呼び、そのように記載しています。
本製品は、AVC Patent Portfolio Licenseに基
づきライセンスされており、お客様が個人的か
つ非営利目的において以下に記載する行為に係
る個人使用を除いてはライセンスされておりま
せん。
zAVC 規格に準拠する動画（以下、AVC ビデ
オ）を記録する場合
z個人的かつ非営利的活動に従事する消費者に
よって記録されたAVC ビデオを再生する場合
zライセンスをうけた提供者から入手された
AVC ビデオを再生する場合
詳細については米国法人MPEG LA, LLC（http:/
/www.mpegla.com）をご参照ください。
本製品に関するソフトウェア情報
1. 本製品には、GNU General Public License
（GPL）ならびに GNU Lesser General Public
License（LGPL）に基づきライセンスされる
ソフトウェアが含まれており、お客様は、こ
れらのソフトウェアのソースコードの入手・
改変・再配布の権利があることをお知らせい
たします。
ソースコードの入手については、下記のホー
ムページをご覧ください。
http://panasonic.biz/sav/
なお、お客様が入手されたソースコードの内
容等についてのお問い合わせは、ご遠慮くだ
さい。
AJ-YDX30G を取り付ける際は、必ず販売店に
ご相談ください。
日本語
AJ-YDX30G(VQT3L98)_EJ.book 1 ページ ２０１２年４月１２日 木曜日 午後５時３７分

J-2
日
本
語
目 次
ご注意 ...................................................................................................... J-3
概 要 ...................................................................................................... J-3
特 長 ...................................................................................................... J-3
対応モデル ............................................................................................... J-3
同梱品 ...................................................................................................... J-3
AJ-HPX3100Gへの取り付け.................................................................... J-4
プロキシの設定 ........................................................................................ J-6
プロキシデータの記録 ............................................................................. J-7
SDメモリーカードへの記録 .................................................................... J-8
プロキシデータの確認 ........................................................................... J-10
プロキシデータの記録に関するエラー表示........................................... J-12
保証とアフターサービス........................................................................ J-14
定 格 .................................................................................................... J-15
AJ-YDX30G(VQT3L98)_EJ.book 2 ページ ２０１２年４月１２日 木曜日 午後５時３７分

J-3
ご注意
z本製品をぬれた手で触れないでください。
z本製品を落としたり、強い衝撃を加えないでください。
z本製品の部品や基板のパターンには手をふれないようにしてください。（静電気による破壊を防止
するためにお守りください）
概 要
AJ-YDX30G（以下、本ボードと記載）は、メモリーカードカメラレコーダー （以下、P2カム
と記載）用のビデオエンコーダーボードです。
本ボードを正しく装着したにもかかわらず、プロキシデータの記録ができない場合、本体側ファーム
ウェアのアップデートが必要となる場合があります。ファームウェアに関する最新情報は、下記ウェ
ブサイトよりP2のサポートページをご覧ください。
日本語：http://panasonic.biz/sav/
英語 ：http://pro-av.panasonic.net/
特 長
本ボードを装着することにより、高解像度プロキシ映像の記録に対応します。
P2カムで撮影した素材を圧縮データファイルにして、素材とは別の領域に記録することができます。
映像はMPEG4型式のフォーマットに加え、高解像度のH.264/AVC型式のフォーマットでの映像記
録、また、音声についてはAAC のほか、非圧縮音声（LPCM）に対応しています。
ファイル形式は従来からのMP4形式に加え、ノンリニア編集により適したMOV形式も選択可能で
す。映像音声ファイルとリアルタイムメタデータファイル（タイムコード・ユーザーズビット・
UMID情報）を、P2カードおよびSDメモリーカードに同時に記録することができます。
撮影した素材を元の素材よりも容量の少ないデータファイルとして記録することができ、クリップ確
認や編集作業を効果的に行えます。
対応モデル
メモリーカードカメラレコーダー ：AJ-HPX3100G
同梱品
2.6mm 径ねじ a 4
AJ-YDX30G(VQT3L98)_EJ.book 3 ページ ２０１２年４月１２日 木曜日 午後５時３７分

J-4
日
本
語
AJ-HPX3100G への取り付け
1AJ-HPX3100G の電源がOFFになっている
ことを確認してください。バッテリー、あ
るいはDC IN 端子に入力がないことを確認
してください。
2AJ-HPX3100G 底面のねじ（A：3.0 mm径
黒色ねじ）を2本外します。
3AJ-HPX3100G の正面から見て左側のねじ
（A）を6本外し、Lサイドパネルを外しま
す。Lサイドパネルを外したときに線材に
負荷がかからないよう、またコネクターに
負荷がかからないないように注意してくだ
さい。
4左側内部のねじ（B：2.6 mm径銀色ねじ）
を1本外します。
5AJ-HPX3100G の正面から見て右側のねじ
（A）5本、およびねじ（C：2.6 mm径黒色
ねじ）4本を外し、Rサイドパネルを外し
ます。Rサイドパネルをはずしたときに束
線、FFCに負荷がかからないように注意し
てください。
6PB COVERについているねじ（B)を4本外
し、PB COVERを外します。
AJ-YDX30Gを取り付ける際は、必ず販売店にご相談ください。
ねじ（A）
ねじ（A）
ねじ（B）
束線
コネクター
ねじ（C）
ねじ（A）
PB
COVER
ねじ
（B）
FFC
束線
FFC
AJ-YDX30G(VQT3L98)_EJ.book 4 ページ ２０１２年４月１２日 木曜日 午後５時３７分

J-5
7ねじ（B）を1本外し、INT CONNECT基
板を外してから、BACKEND基板を外しま
す。このとき、サイドコンタクトに手を触
れないよう、注意してください。
87で外したBACKEND基板のコネクターに
本ボードのコネクターをはめ込みます。
9BACKEND基板と本ボードを、ねじ（同梱
品）4本を使って固定します。
10 BACKEND基板を元の位置に差し、4で外
した箇所をねじ（B）で止めます。
11 INT CONNECT基板を元の位置に差し、7
で外した箇所をねじ（B）で止めます。基
板を挿す際は、斜め差しにならないよう、
まっすぐ、ゆっくりと行ってください。ま
た、ケーブルを挟み込まないよう、気をつ
けてください。
12 PB COVERを元の位置に戻し、6で外し
た箇所をねじ（B）で止めます。
13 サイドパネルを元の位置に戻し、 2、3、
5で外した箇所をねじ（A、C）で止めま
す。
<ノート>
zLサイドパネルを取り付ける際、線材に
負荷がかからないよう、またコネクター
に負荷がかからないないように注意して
ください。
zRサイドパネルを取り付ける際、下記に
示すようにコードの処理をしてくださ
い。
<ノート>
ねじの取り外し、取り付けには、ねじ（A）は
＋No.2、ねじ（B）、（C）は＋No.1のドライ
バーをご使用ください。
INT CONNECT基板
BACKEND 基板
ねじ（B）
サイドコンタクト
コネクター サイドコンタクト
本ボード BACKEND基板
ねじ（同梱品）
基板が斜め差しになっている場合、カメラレ
コーダーが記録障害などを起こす場合があり
ます。
AJ-YDX30G(VQT3L98)_EJ.book 5 ページ ２０１２年４月１２日 木曜日 午後５時３７分