SMART HUSK MR-2752 User manual

ASSEMBLY INSTRUCTIONS
HUSK LOUNGE
MODEL: MR-2752
www.synargy.com SynargyFurniture
Visit us online for product care, information and warranty details:
Husk 3 Seater Lounge
The components are heavy, assembly should be performed by two people.
Safety Instructions
• This product is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the product by a person responsible
for their safety.
• Ensure there is no person, animal or item obstructing the area under
the footrest before operating this product.
• Improper use or installation may result in the risk of fire, electric shock
and/or injury. We assume no liability for any eventual damages caused
by improper use or inappropriate handling, or by any other non-com-
pliance with the instructions in this manual.
• Children should be supervised to ensure that they do not play with
the product.
• This product contains moving parts. Keep fingers, hair and body
parts well clear from moving parts. To reduce the risk of injury, keep
children and pets clear of the product when in use.
Electrical Instructions
• Never force the back or footrest to close faster than the electric motor.
• Before commencing cleaning or maintenance, ensure this product is
disconnected from the power outlet and the back is in the full upright
position.
• Disconnect this product from the power outlet before moving.
• Cease operation and disconnect from the power outlet if you ever
detect a burning odour or smoke coming from the product.
• Do not operate this product if liquid spillage occurs on or around it.
Disconnect from the power outlet and allow product to completely dry
before reconnecting.
• Do not sit or place additional weight on the arms, back or open
footrest.
• This product is very heavy. Only move this product by lifting the main
body. Never drag by the footrest, back or arm rest.
• Return this product to the full upright position to stand safely and
prevent a tripping hazard.
• Do not operate this product if damage is visible in any form.
• Do not modify or use unauthorised substitute parts.
• This product has been designed and intended for indoor residential
use only. It is not suitable for commercial or outdoor use.
• This product is not intended to be used as part of a health care plan.
Consult your medical professional before operating if you are taking
medication or have physical limitations.
• Do not operate the power functions or charge station with wet
hands.
• Check the condition of the power cord, electrical cords, transformer,
plug and connector on a monthly basis. Do not operate if wear is
visible.
• Ensure the power cord, electrical cords and transformer are clear of
moving parts and not trapped underneath the base.
• Position the power cord to minimise a tripping hazard.
• Never attempt to open or disassemble electrical components.
• We recommend the use of a surge protector (not included).
Synargy is a registered responsible supplier on ERAC. Electrical components within our products have been tested to comply with legal
requirements imposed for electrical safety and EMC.
If you have any diculty with assembly or operation, please contact the store of purchase in the first instance.
Please read the below safety & electrical instructions before operating
3 SEATER Included Components
A1 x Seat Base B1 x LAF Armrest C1 x RAF Armrest
D1 x LAF Back E1 x Center Back F1 x RAF Back
G1 x LAF Wing H1 x RAF Wing I 1 x Power Supply
J
1 x USB
Power
Supply
Step 1
Remove all packaging and set aside in a safe location before disposal or recycling of applicable materials.
On the underside of the sofa there is a package containing the power supply - cut the ties to remove the
packaging and set the power supply aside.Remove the timber support rails from the seat base using the
provided tool.
Identify the armrests for the LAF side (B) and the RAF side (C) Connect these to the ends of the seat base
(A) by the attached zippers
B
A
C

ASSEMBLY INSTRUCTIONS
HUSK LOUNGE
MODEL: MR-2752
www.synargy.com SynargyFurniture
Visit us online for product care, information and warranty details:
Step 4
Make the electrical connections in the back of the lounge suite, per below diagram.
Step 3
Connect the LAF wing (G) and RAF wing (H) at either end of the lounge suite. These slide into place with
the attached brackets.
Step 2
Identify the back rests for left-facing side (D), center (E) and right-facing side (F), and place them facing
down on the seat base (A).
Step 5
Connect the power supply to the back of the suite and plug into a wall outlet.Also plug the center
dropdown table to a wall outlet.
3 SEATER
Lift each back rest individually to align the metal receivers with the metal posts of the
chair base. Allow the posts to slide into the receivers and press down firmly on the
top of the backrest until a click is heard on each side.
Scan QR code for a
video of this step
G
F
A
ED
H
Make sure all plugs are connected on the product before plugging the power cords into a wall outlet
- otherwise product damage may occur. The USB ports (where applicable) are designed with working
voltage of 5V and can NOT be used to supply power for laptop computers (neither PC or Mac).
Plugging a laptop computer to the USB port may end up damaging either the computer or the USB port
due to unmatched working voltage.

ASSEMBLY INSTRUCTIONS
HUSK LOUNGE
MODEL: MR-2752
www.synargy.com SynargyFurniture
Visit us online for product care, information and warranty details:
Husk 2 Seater Lounge
The components are heavy, assembly should be performed by two people.
Safety Instructions
• This product is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the product by a person responsible
for their safety.
• Ensure there is no person, animal or item obstructing the area under
the footrest before operating this product.
• Improper use or installation may result in the risk of fire, electric shock
and/or injury. We assume no liability for any eventual damages caused
by improper use or inappropriate handling, or by any other non-com-
pliance with the instructions in this manual.
• Children should be supervised to ensure that they do not play with
the product.
• This product contains moving parts. Keep fingers, hair and body
parts well clear from moving parts. To reduce the risk of injury, keep
children and pets clear of the product when in use.
Electrical Instructions
• Never force the back or footrest to close faster than the electric motor.
• Before commencing cleaning or maintenance, ensure this product is
disconnected from the power outlet and the back is in the full upright
position.
• Disconnect this product from the power outlet before moving.
• Cease operation and disconnect from the power outlet if you ever
detect a burning odour or smoke coming from the product.
• Do not operate this product if liquid spillage occurs on or around it.
Disconnect from the power outlet and allow product to completely dry
before reconnecting.
• Do not sit or place additional weight on the arms, back or open
footrest.
• This product is very heavy. Only move this product by lifting the main
body. Never drag by the footrest, back or arm rest.
• Return this product to the full upright position to stand safely and
prevent a tripping hazard.
• Do not operate this product if damage is visible in any form.
• Do not modify or use unauthorised substitute parts.
• This product has been designed and intended for indoor residential
use only. It is not suitable for commercial or outdoor use.
• This product is not intended to be used as part of a health care plan.
Consult your medical professional before operating if you are taking
medication or have physical limitations.
• Do not operate the power functions or charge station with wet
hands.
• Check the condition of the power cord, electrical cords, transformer,
plug and connector on a monthly basis. Do not operate if wear is
visible.
• Ensure the power cord, electrical cords and transformer are clear of
moving parts and not trapped underneath the base.
• Position the power cord to minimise a tripping hazard.
• Never attempt to open or disassemble electrical components.
• We recommend the use of a surge protector (not included).
Synargy is a registered responsible supplier on ERAC. Electrical components within our products have been tested to comply with legal
requirements imposed for electrical safety and EMC.
If you have any diculty with assembly or operation, please contact the store of purchase in the first instance.
Please read the below safety & electrical instructions before operating
2 SEATER Included Components
A1 x Seat Base B1 x LAF Armrest C1 x RAF Armrest
D1 x LAF Back E1 x Console Back F1 x RAF Back
G1 x LAF Wing H1 x RAF Wing I 1 x Power Supply
Step 1
Remove all packaging and set aside in a safe location before disposal or recycling of applicable materials.
On the underside of the sofa there is a package containing the power supply - cut the ties to remove the
packaging and set the power supply aside.
Identify the armrests for the LAF side (B) and the RAF side (C) Connect these to the ends of the seat base
(A) by the attached zippers
B
A
C

ASSEMBLY INSTRUCTIONS
HUSK LOUNGE
MODEL: MR-2752
www.synargy.com SynargyFurniture
Visit us online for product care, information and warranty details:
For care and maintenance tips & tricks, videos, and other
products please visit our website: www.synargy.com
2 SEATER
Step 2
Identify the back rests for left-facing side (D), console back (E) and right-facing side (F), and place them
facing down on the seat base (A).
Lift each back rest individually to align the metal receivers with the metal posts of the
chair base. Allow the posts to slide into the receivers and press down firmly on the
top of the backrest until a click is heard on each side.
Scan QR code for a
video of this step
F
A
E
D
Step 3
Connect the LAF wing (G) and RAF wing (H) at either end of the lounge suite. These slide into place with
the attached brackets.
G H
Step 4
Make the electrical connections in the back of the lounge suite, per below diagram.
Make sure all plugs are connected on the product before plugging the power cords into a wall outlet
- otherwise product damage may occur. The USB ports (where applicable) are designed with working
voltage of 5V and can NOT be used to supply power for laptop computers (neither PC or Mac).
Plugging a laptop computer to the USB port may end up damaging either the computer or the USB port
due to unmatched working voltage.
Step 5
Connect the power supply to the back of the suite and plug into a wall outlet.

ASSEMBLY INSTRUCTIONS
HUSK LOUNGE
MODEL: MR-2752
www.synargy.com SynargyFurniture
Visit us online for product care, information and warranty details:
Husk Recliner Chair
The components are heavy, assembly should be performed by two people.
Safety Instructions
• This product is not intended for use by persons (including children)
with reduced physical, sensory or mental capabilities, or lack of
experience and knowledge, unless they have been given supervision
or instruction concerning use of the product by a person responsible
for their safety.
• Ensure there is no person, animal or item obstructing the area under
the footrest before operating this product.
• Improper use or installation may result in the risk of fire, electric shock
and/or injury. We assume no liability for any eventual damages caused
by improper use or inappropriate handling, or by any other non-com-
pliance with the instructions in this manual.
• Children should be supervised to ensure that they do not play with
the product.
• This product contains moving parts. Keep fingers, hair and body
parts well clear from moving parts. To reduce the risk of injury, keep
children and pets clear of the product when in use.
Electrical Instructions
• Never force the back or footrest to close faster than the electric motor.
• Before commencing cleaning or maintenance, ensure this product is
disconnected from the power outlet and the back is in the full upright
position.
• Disconnect this product from the power outlet before moving.
• Cease operation and disconnect from the power outlet if you ever
detect a burning odour or smoke coming from the product.
• Do not operate this product if liquid spillage occurs on or around it.
Disconnect from the power outlet and allow product to completely dry
before reconnecting.
• Do not sit or place additional weight on the arms, back or open
footrest.
• This product is very heavy. Only move this product by lifting the main
body. Never drag by the footrest, back or arm rest.
• Return this product to the full upright position to stand safely and
prevent a tripping hazard.
• Do not operate this product if damage is visible in any form.
• Do not modify or use unauthorised substitute parts.
• This product has been designed and intended for indoor residential
use only. It is not suitable for commercial or outdoor use.
• This product is not intended to be used as part of a health care plan.
Consult your medical professional before operating if you are taking
medication or have physical limitations.
• Do not operate the power functions or charge station with wet
hands.
• Check the condition of the power cord, electrical cords, transformer,
plug and connector on a monthly basis. Do not operate if wear is
visible.
• Ensure the power cord, electrical cords and transformer are clear of
moving parts and not trapped underneath the base.
• Position the power cord to minimise a tripping hazard.
• Never attempt to open or disassemble electrical components.
• We recommend the use of a surge protector (not included).
Synargy is a registered responsible supplier on ERAC. Electrical components within our products have been tested to comply with legal
requirements imposed for electrical safety and EMC.
If you have any diculty with assembly or operation, please contact the store of purchase in the first instance.
Please read the below safety & electrical instructions before operating
RECLINER Included Components
A1 x Seat Base B1 x LAF Armrest C1 x RAF Armrest
D1 x Seat Back E1 x LAF Wing F1 x RAF Wing
G1 x Power Supply
Step 1
Remove all packaging and set aside in a safe location before disposal or recycling of applicable materials.
On the underside of the sofa there is a package containing the power supply - cut the ties to remove the
packaging and set the power supply aside.
Identify the armrests for the LAF side (B) and the RAF side (C) Connect these to the ends of the seat base
(A) by the attached zippers
B
A
C

ASSEMBLY INSTRUCTIONS
HUSK LOUNGE
MODEL: MR-2752
www.synargy.com SynargyFurniture
Visit us online for product care, information and warranty details:
Make sure all plugs are connected on the product before plugging the power cords into a wall outlet
- otherwise product damage may occur. The USB ports (where applicable) are designed with working
voltage of 5V and can NOT be used to supply power for laptop computers (neither PC or Mac). Plugging
a laptop computer to the USB port may end up damaging either the computer or the USB port due to
unmatched working voltage.
Step 4
Make the electrical connection in the back of the lounge suite, per below diagram, and connect the power
supply together.
RECLINER
Step 2
Identify the seat back (D), and place it facing down on the seat base (A).
Lift the back rest to align the metal receivers with the metal posts of the chair base.
Allow the posts to slide into the receivers and press down firmly on the top of the
backrest until a click is heard on each side.
Scan QR code for a
video of this step
A
D
Step 3
Connect the LAF wing (E) and RAF wing (F) at either end of the lounge suite. These slide into place with
the attached brackets.
E F
For care and maintenance tips & tricks, videos, and other
products please visit our website: www.synargy.com
Step 5
Connect the power supply plug into a wall outlet.The recliner chair is now ready for use.