SMART FSE-300 User manual

2
B
A
SBID-6065/6075
SBID-7075/7086
SBID-8065/8075
SBID-MX065/MX075/MX086
SPNL-6065-V2
SPNL-6075
a (×8)
35 in-lb
τ
Congratulations on your new SMART product!
smarttech.com/downloads - Download software
smarttech.com/support - Information on support, compliance,
warranty, and product registration
Willkommen in Ihrem neuen SMART-Produkt!
smarttech.com/downloads - Laden Sie Ihre Software herunter
smarttech.com/support - Informationen über Support, Compliance,
Garantie und Produktregistrierung
Félicitations pour votre nouveau produit SMART !
smarttech.com/downloads - Télécharger votre logiciel
smarttech.com/support - Informations sur l'assistance, la conformité,
la garantie et l'enregistrement du produit
SMART Technologies
3636 Research Road NW
Calgary, AB, T2L 1Y1
CANADA
Toll free (U.S./CA): 1.888.42.SMART
Tel: [phone]
P/N: 1029266 Rev: 02
A
B
C
1
a (×8) b (×2) c (×2) d (×4) e (×10) f (×1) g (×4) h (×4) j (×4) k (×4) m (×4) n (×4)
FSE-300 stand assembly kit FSE-300 LCD panel kit
FSE-300 STAND

A
A
B
1031338 Rev 03 3
4
7
5
4 ×
× 2
3
6
SBID-7075/7086 × 2
g (×4) j (×4)
2×
f
B

3 1031338 Rev 03
×2
SBID-8065/8075
SBID-MX075/MX086
SBID-6065/6075
SPNL-6065-V2
SPNL-6075 g (×4) j (×4) n (×4)
10 11
8 9
SBID-MX065
×2
h (×4) k (×4) m (×4)
7
17 in-lb
τ
4×
b (×2)
Max 86"
Max
e (×8)
d (×4)
4 ×

1514
1312
12 in-lb
τ
e (×2)
c (×2)
FCC CAUTION
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable pro-
tection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment o and on, the user is encouraged to try to correct the interference by one or more
of the following measures: • Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit dierent from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Innovation, Science and Economic Development Canada:
This device complies with ICES-003 of the ISED rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
Cet appareil est conforme à la norme ISED NBM-003 pour les appareils radio agréés. Son fonctionnement est sujet aux deux conditions suivantes:
(1) le dispositif ne doit pas produire de brouillage préjudiciable, et
(2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable.
support.smarttech.com
support.smarttech.com/contact-support
1031338 Rev 04
smarttech.com/kb/171275
*1031338*
Hardware environmental compliance
SMART Technologies supports global eorts to ensure that electronic equipment is manufactured, sold and disposed of in a safe and environmentally friendly manner.
Waste Electrical and Electronic Equipment regulations (WEEE Directives)
Electrical and electronic equipment contain substances that can be harmful to the environment and to human health. The crossed-out wheeled bin symbol indicates that products should
be disposed of in the appropriate recycling stream and not as regular waste.
See smarttech.com/compliance for more information.
© 2018 SMART Technologies ULC. All rights reserved. SMART Board, smarttech, the SMART logo and all SMART taglines are trademarks or
registered trademarks of SMART Technologies ULC in the U.S. and/or other countries. All third-party products and company names may be
trademarks of their respective owners. Contents are subject to change without notice. This product and/or use thereof covered by one or more of
the following U.S. patents: smarttech.com/patents. Other patents pending. 05/2018.