Smartwares CMS-30100 User manual

CMS-30100

Table of Contents
English ..................................................................................................................... iii
Nederlands .............................................................................................................. xx
Deutsch.................................................................................................................... xxxvii
Français.................................................................................................................... liv
Italiano..................................................................................................................... lxxi
Polski ....................................................................................................................... lxxxviii

Table of Contents
CMS-30100_IM iii
Table of Contents
1 Safety ................................................................................................................................................................... 4
1.1 Installation Safety ................................................................................................................................................. 4
1.2 Operation Safety................................................................................................................................................... 4
2 Parts Description .................................................................................................................................................. 5
3 Installation ........................................................................................................................................................... 6
3.1 Install the monitor ................................................................................................................................................ 6
3.1.1 Mounting.................................................................................................................................................. 6
3.1.2 Wiring....................................................................................................................................................... 6
3.1.3 Insert the MicroSD card (not included).................................................................................................... 6
3.2 Install the camera ................................................................................................................................................. 6
3.2.1 Mounting.................................................................................................................................................. 6
3.2.2 Wiring....................................................................................................................................................... 7
4 On-screen menu ................................................................................................................................................... 8
5 Setting up your device .......................................................................................................................................... 9
5.1 Add a camera........................................................................................................................................................ 9
5.2 Select WIFI channel (if required) .......................................................................................................................... 9
6 System operation ................................................................................................................................................. 10
6.1 Video Playback...................................................................................................................................................... 10
6.2 System Setup ........................................................................................................................................................ 11
6.2.1 Language .................................................................................................................................................. 11
6.2.2 Time Setup ............................................................................................................................................... 11
6.2.3 Wireless Internet...................................................................................................................................... 12
6.2.4 Wireless Channel...................................................................................................................................... 12
6.2.5 Camera Audio Enable............................................................................................................................... 13
6.2.6 Volume setup ........................................................................................................................................... 13
6.2.7 Auto Close ................................................................................................................................................ 14
6.3 Add a camera........................................................................................................................................................ 14
6.4 Record setup......................................................................................................................................................... 15
6.4.1 Record Schedule....................................................................................................................................... 15
6.5 Alarm setup........................................................................................................................................................... 16
6.6 System manage..................................................................................................................................................... 16
6.6.1 System Info............................................................................................................................................... 16
6.6.2 Factory Setting ......................................................................................................................................... 17
6.6.3 Upgrade.................................................................................................................................................... 17
6.6.4 IPC Upgrade.............................................................................................................................................. 17
7 Setting up the mobile app..................................................................................................................................... 18
8 Declaration of Conformity .................................................................................................................................... 19

1 | Safety
4 CMS-30100_IM
1 Safety
1. Please read these instructions carefully before installing and using the product.
2. Do not cut the power supply cable to extend it; the device (transformer) will not
work with a longer cable. Do not plug in the device until all the wiring has been fin-
ished.
1.1 Installation Safety
1. Keep children and bystanders away while installing the products. Distractions can
cause you to lose control.
2. Do not overreach when installing this product. Keep proper footing and balance at
all times. This enables better control in unexpected situations.
3. This product is not a toy. Mount it out of reach of children.
1.2 Operation Safety
1. Do not operate electrically powered products in explosive atmospheres, such as in
the presence of flammable liquids , gases, or dust. Electrically powered products
create sparks which may ignite the dust or fumes.
2. The warnings, precautions, and instructions discussed in this instruction manual
cannot cover all possible conditions and situations that may occur. It must be un-
derstood by the operator that common sense and caution are factors which can-
not be built into this product, but must be supplied by the operator.
3. Do not expose the Power Adapter of this product to rain or wet conditions. Water
entering the Power Adapter will increase the risk of electric shock.
4. Do not abuse the Power Cord. Never use the cord for unplugging the plug from the
outlet. Keep cord away from heat, oil, sharp edges or moving parts. Damaged or
entangled cords increase the risk of electric shock.
5. The adapter must match the outlet. Never modify the plug in any way. Unmodified
plugs and matching outlets will reduce risk of electric shock.

Parts Description | 2
CMS-30100_IM 5
2 Parts Description
Camera
1. Antenna
2. LED light
3. Lens
4. Day/night sensor
5. Microphone
6. Speaker
Monitor
1. Antenna
2. Touch screen
3. Microphone
4. LED battery indicator
5. LED recording indicator
6. USB slot
7. MicroSD slot
8. On/Off switch for battery use
9. AC adaptor input
10. Stand
Frequency: 2.4GHz
Maximum transmission power: 17.63dBm

3 | Installation
6 CMS-30100_IM
3 Installation
Before doing the fixed installation, it is recommended that you consider the following:
Connect everything to familiarize yourself with the units.
Check the wireless coverage at the intended mounting locations by temporarily placing
the units.
3.1 Install the monitor
3.1.1 Mounting
The monitor is designed to stand on a table or any flat surface.
a) Pull out the stand leg on the back of the monitor.
b) Pull the two antennas on the back of the monitor to an upright position.
c) Place on any flat surface.
3.1.2 Wiring
The monitor is portable and can be used on battery power, AC power or both. When
the AC adapter is connected the battery charges until full and then operates directly
from the AC adapter.
Batteries must be purchased separately.
Battery type: 18650
3.1.3 Insert the MicroSD card (not included)
To record video, a MicroSD card is required.
a) Locate the MicroSD card slot on the right side of the monitor.
b) Insert the MicroSD card (It will only fit when in the correct position).
c) A class 10 MicroSD card with a maximum storage of 128gb is recommended.
3.2 Install the camera
3.2.1 Mounting
The camera can be mounted in any direction and on any surface that can hold its
weight. The camera must be mounted near access to mains power or an extension
may be needed.
To mount the camera, you will need the following tools:
üA suitable screwdriver for the included screws.
üA drill and suitable drill bit for the included screw plugs.
a) Position the camera where desired.
b) Mark the screw positions with a pen.
c) Drill the necessary holes.

Installation | 3
CMS-30100_IM 7
d) Insert the plugs.
e) Drill a sufficiently sized hole to pull the cables.
f) Pull the required cables through the hole.
g) Mount the included antenna onto the camera.
h) Fasten the camera with the screws.
In case that you wish to run the cable on the outside of the wall, a weatherproof con-
nection box is required.
3.2.2 Wiring
The camera is wireless and only requires an electrical connection.
Things to consider when wiring the camera:
– The cable connection must be done indoors or inside a weather proof connection
box, mounted on the outside.
– The hole should be sealed with filler to avoid water ingress.
– It is recommended to pull all cables through the hole. The re-set button can be left
outside but it is not recommended.

4 | On-screen menu
8 CMS-30100_IM
4 On-screen menu
Illustration1: On screen menu
The on screen menu appears when you tap in the video feed.
Button Description
Microphone Press and hold to enable communication with the currently
watched camera. (Make sure camera microphone is enabled, See
section “Camera Audio Enable”.)
Mute Select to mute/unmute the monitor speakers
Main menu Select to enter the main menu
Zoom Select to Zoom the video feed.
Tap once to select the zoom mode.
Tap again in the image to zoom.
Select the (-) icon to exit the zoom mode.
Playback Select to enter the Playback menu.
This will allow you to view recordings.

Setting up your device | 5
CMS-30100_IM 9
5 Setting up your device
5.1 Add a camera
Illustration2: Main menu - Add
Camera
Illustration3: Add Camera
The monitor can pair up to 4 cameras. To add a camera do the following procedure:
a) Turn the camera on by connecting it to the mains supply.
b) Wait for 30 seconds.
c) You will now hear “Start configuration mode”.
ðNOTE: If you do not hear the voice, press the re-set button on the camera for
6 seconds until you hear “Restore factory settings”.
d) On the monitor from the main menu: Select “Add Camera”.
e) Select “Add Camera”. (This must be done within x minutes from resetting the cam-
era.)
f) On the camera: If the above steps are done correctly, you will hear:
- “Wireless settings, please wait”
- “Wireless connection successful”
g) On the monitor: Wait for the pairing to complete.
5.2 Select WIFI channel (if required)
Illustration4: Wifi channel
Illustration5: Select wifi channel
If there are many Wi-Fi networks in your area and you are experiencing bad reception,
change the Wi-Fi channel by doing the procedure below:
a) From the main menu: Select “Add Camera”.
b) Select “Wifi Channel”
c) Select “Wifi Channel”
d) Select a channel from the list. (Try different channels if the reception problem per-
sists.)

6 | System operation
10 CMS-30100_IM
6 System operation
6.1 Video Playback
Illustration6: Video playback icon
Illustration7: Main directory
Illustration8: Date direcotory
Illustration9: Time directory
The monitor will start recording video depending on the settings in “Record Setup”. To
view the recordings do the procedure below:
a) From the main menu: Select “Video Playback”.
b) Select the camera folder (1-4) you wish to view recordings from. (Up to 4 cameras
are supported).
c) Select the folder with the desired date.
d) Select the folder with the desired time.
e) Select the desired file to view the recording.

System operation | 6
CMS-30100_IM 11
Illustration10: File directory
6.2 System Setup
6.2.1 Language
Illustration11: System setup lan-
guage
Illustration12: Language selection
The monitor supports a wide range of languages that you can select from the “System
Setup”.
a) From the main menu: Select “System Setup”.
b) Select “Language”.
c) Select the desired language from the list.
6.2.2 Time Setup
Illustration13: Select Time Setup
The date and time can be set manually or by syncing to the internet.
a) From the main menu: Select “System Setup”.
b) Select “Time Setup”.
c) Choose whether to sync time automatically or not. (Syncing automatically requires
the monitor to be connected to the internet. See section “Wireless Internet”.
d) Select time zone. (This must be done even if you choose to sync time automatic-
ally.)
e) Select “Time Setup” if you choose to manually set up your time and date. (This op-
tion is only available if “Sync Time” is set to off.

6 | System operation
12 CMS-30100_IM
Illustration14: Time Setup
Illustration15: Date Time Setup
(manual)
6.2.3 Wireless Internet
Do the procedure below to enable the wireless internet connection. This feature is op-
tional but it enables you to use the following features:
– App connectivity
– Time and date synchronization.
a) Make sure that you have an internet connected WIFI router, your password and
router name (SSID) available.
b) From the main menu: Select “System Setup”.
c) Select “Wireless Internet”.
d) Enable WLAN.
e) Select “Hotspot list”.
f) Find and select your wireless router.
g) Type your password.
ðNOTE: Only 2.4GHz networks are supported
h) Download the “SW360” app.
i) Open the app, register as a new user and follow the instructions given in the app.
6.2.4 Wireless Channel
Illustration16: Select Wireless
Channel
In some cases the range of the wireless signal can be obstructed by other wireless net-
works occupying the same channel. If you experience a lower range than expected,
changing the channel may provide a solution.
a) From the main menu: Select “System Setup”.
b) Select “Wireless Channel”.
c) Select “Wifi channel”.
d) Select a new channel. (The Wifi router is usually set to automatically detect the
channel. If not the channel must also be changed on the router manually).

System operation | 6
CMS-30100_IM 13
Illustration17: Wifi Channel
Illustration18: Channel List
6.2.5 Camera Audio Enable
Illustration19: Camera Audio En-
able
Illustration20: Enable - Disable
camera audio
The camera microphone can be enabled or disabled from this menu. It is important to
note that if the camera microphone is disabled, 2-way communication with the camera
is no longer possible.
a) From the main menu: Select “System Setup”.
b) Select “Camera Audio Enable”.
c) Select the relevant camera and pull the slider to the on or off position.
6.2.6 Volume setup
Illustration21: Volume setup
The volume setup allows the volume of the monitor to be increased or decreased.
a) From the main menu: Select “System Setup”.
b) Select “Volume Setup”.
c) Set the volume by selecting a numbered volume value (0-4). Setting the value to 0
will mute the monitor speakers completely.

6 | System operation
14 CMS-30100_IM
Illustration22: Altering the volume
6.2.7 Auto Close
Illustration23: Auto close
Illustration24: Auto close (time out)
duration
The auto close function enables/disables the screen time out. When the auto close
function is enabled, it turns off the monitor screen after a set time while the system is
running in normal operation.
a) From the main menu: Select “System Setup”.
b) Select “Auto Close”
c) Select a duration before time out (the duration starts after the last interaction
with the monitor).
Note: If the monitor is running on batteries, it is recommended to have a short time
out duration to save power.
6.3 Add a camera
Illustration25: Main menu - Add
Camera
Illustration26: Add Camera
The monitor can pair up to 4 cameras. To add a camera do the following procedure:
a) Turn the camera on by connecting it to the mains supply.
b) Wait for 30 seconds.
c) You will now hear “Start configuration mode”.
ðNOTE: If you do not hear the voice, press the re-set button on the camera for
6 seconds until you hear “Restore factory settings”.
d) On the monitor from the main menu: Select “Add Camera”.
e) Select “Add Camera”. (This must be done within x minutes from resetting the cam-
era.)
f) On the camera: If the above steps are done correctly, you will hear:
- “Wireless settings, please wait”
- “Wireless connection successful”
g) On the monitor: Wait for the pairing to complete.

System operation | 6
CMS-30100_IM 15
6.4 Record setup
The system can be set up to record video in different modes. It supports up to 4 separ-
ate schedules where each schedule can be set in different modes, using 1 or more in-
stalled cameras. See section “Record Schedule”.
To configure the record setup settings, do the procedure below.
a) From the main menu: Select “Record Setup”.
b) Select storage device. (This is only relevant if you have inserted a MicroSD card.)
c) Select “Storage Manage” to see the current memory use and format the MicroSD
card.
d) Select “Overwrite” to enable/disable the monitor to overwrite older recordings
when the memory runs out.
6.4.1 Record Schedule
Illustration27: Record Schedule
Illustration28: Schedule 1-4
Illustration29: Schedule settings
To make a recording schedule, do the procedure below.
a) From the main menu: Select “Record Setup”.
b) Select “Record Schedule”.
c) Select schedule 1-4.
d) Enable the selected schedule by moving the slider (it will turn green when en-
abled).
e) Select “channel” (cameras).
f) Select the “channel” (camera(s)) that you want to record from).
g) Select “Weekday”.
h) Select the days that you want to record on, from the list.
i) Select “Time” and insert the time frame of which you want to record.
Note: The “Type” only has one option (Enable motion alarm) and it is enabled by de-
fault.

6 | System operation
16 CMS-30100_IM
6.5 Alarm setup
Illustration30: Alarm setup chan-
nels
Illustration31: Alarm setup channel
settings
Illustration32: Area Edit
The monitor has an alarm function that can be set to trigger when motion is detected.
To set the alarm, do the procedure below.
a) From the main menu: Select “Alarm Setup”.
b) Select “Alarm volume setup”.
c) Set the desired alarm volume. (The alarm volume overrides any other sound set-
tings if triggered.)
d) Select the “Channel” (camera) that you want to use to trigger the alarm.
e) Enable the “Enable Motion Alarm” by moving the slider (it will turn green when
enabled).
f) Enable the “APP Alarm” by moving the slider (it will turn green when enabled) if
you wish to receive alarms on your mobile device. (See section “Setting up the mo-
bile app”)
g) Enable the “Monitor Sound Alarm” if you wish to get an audible alarm from the
monitor.
h) Select the “Sensitivity” to set the sensitivity of the motion detector.
i) Select “Area Edit” to mask areas that you do not want to trigger the alarm. (This is
useful if you have trees or traffic etc. that is always seen by the camera.)
Note: Areas marked in orange will not trigger the motion alarm.
6.6 System manage
6.6.1 System Info
Illustration33: System Info
The system info provides information about the monitor. This information is mainly
used when support is required. To view the system info, do the procedure below.
a) From the main menu: Select “System Manage”.
b) Select “System Info”.

System operation | 6
CMS-30100_IM 17
6.6.2 Factory Setting
Illustration34: Factory Setting
This menu allows the user to restore the factory settings at two levels.
– “Simple Restore” will reset all settings except your paired cameras and Wifi set-
tings.
– “Restore All” will reset all settings including your paired cameras and Wifi settings.
– To restore your system, do the procedure below.
a) From the main menu: Select “System Manage”.
b) Select “Factory Setting”.
c) Select “Simple Restore” or “Restore All”.
6.6.3 Upgrade
The “Upgrade” menu allows the user to update the monitor firmware using a MicroSD
card. This is not recommended and is mainly used when required by support.
6.6.4 IPC Upgrade
The “IPC Upgrade” menu allows the user to update the camera firmware using a Mi-
croSD card. This is not recommended and is mainly used when required by support.

7 | Setting up the mobile app
18 CMS-30100_IM
7 Setting up the mobile app
The system supports the mobile app “SW360”. The app can be used as an additional
monitor on your mobile device. To set up the mobile app, do the procedure below.
a) Connect the monitor to a wifi network. (See section “Wireless Internet”.)
b) Connect your mobile device to the same network.
c) Download the “SW360” app.
d) Open the app, register as a new user and follow the instructions given in the app.
e) Log in to the app.
f) Select the (+) icon to add a new device.
g) Select the monitor in the device list.
h) Select the device that appears in the list (normally a 10 digit number).
Note: Your device should now be added. To learn more about SW360, see the app
manual.

Declaration of Conformity | 8
CMS-30100_IM 19
8 Declaration of Conformity
Hereby, Smartwares Europe declares that the radio equipment type CMS-30100 is in
compliance with Directive 2014/53/EU
The full text of the EU declaration of conformity is available at the following internet
address: www.smartwares.eu/doc

Inhoudsopgave
xx CMS-30100_IM
Inhoudsopgave
1 Veiligheid ............................................................................................................................................................. 21
1.1 Veilige installatie................................................................................................................................................... 21
1.2 Veilig gebruik ........................................................................................................................................................ 21
2 Beschrijving van onderdelen................................................................................................................................. 22
3 Installatie ............................................................................................................................................................. 23
3.1 De monitor installeren.......................................................................................................................................... 23
3.1.1 Montage................................................................................................................................................... 23
3.1.2 Bedrading ................................................................................................................................................. 23
3.1.3 De MicroSD-kaart plaatsen (niet meegeleverd)....................................................................................... 23
3.2 De camera installeren........................................................................................................................................... 23
3.2.1 Montage................................................................................................................................................... 23
3.2.2 Bedrading ................................................................................................................................................. 24
4 On-screen menu ................................................................................................................................................... 25
5 Uw apparaat configureren.................................................................................................................................... 26
5.1 Een camera toevoegen ......................................................................................................................................... 26
5.2 Wifikanaal selecteren (indien vereist) .................................................................................................................. 26
6 Systeembediening ................................................................................................................................................ 27
6.1 Videoweergave ..................................................................................................................................................... 27
6.2 Systeeminstellingen.............................................................................................................................................. 28
6.2.1 Taal........................................................................................................................................................... 28
6.2.2 Tijdconfiguratie ........................................................................................................................................ 28
6.2.3 Draadloos internet ................................................................................................................................... 29
6.2.4 Draadloos kanaal...................................................................................................................................... 29
6.2.5 Camera-audio inschakelen....................................................................................................................... 30
6.2.6 Volumeconfiguratie.................................................................................................................................. 30
6.2.7 Automatisch sluiten ................................................................................................................................. 31
6.3 Een camera toevoegen ......................................................................................................................................... 31
6.4 Opnameconfiguratie............................................................................................................................................. 31
6.4.1 Opnameschema ....................................................................................................................................... 32
6.5 Alarmconfiguratie ................................................................................................................................................. 32
6.6 Systeem beheren .................................................................................................................................................. 33
6.6.1 Systeeminfo.............................................................................................................................................. 33
6.6.2 Fabrieksinstellingen ................................................................................................................................. 33
6.6.3 Upgrade.................................................................................................................................................... 33
6.6.4 IPC-upgrade.............................................................................................................................................. 34
7 De mobiele app configureren................................................................................................................................ 35
8 Conformiteitsverklaring........................................................................................................................................ 36