SMC Networks 526-20 User manual

Sawyer Manufacturing Company
7799 S. Regency Dr., Tulsa, OK 74131 USA
F918.834.0318
[e-mail]
P918.834.2550
sawyermfg.com
V1.2
FOOT PUMP
Warranty
All products manufactured by or for Sawyer Manufacturing Company are
guaranteed against defects due to faulty workmanship or materials for twelve
months from the date of purchase.
This guarantee is limited to the repair or replacement of any parts found to be
defecve, and no other liability, expressed, implied or conngent is assumed.
We appreciate your business!
Congratulaons on your new SAWYER product. We are proud to have
you as our customer and will strive to provide you with the best service
and reliability in the industry. This product is backed by our extensive
warranty and world-wide service network. To locate your nearest
distributor or service agency, please contact us at the phone number
and address listed on the boom of each page.
You are in good company!
Sawyer Manufacturing Company is the world leader in the design and
manufacture of pipeline and welding equipment since 1948. Sawyer
equipment has become a standard in the industry and connues to set
the benchmark for quality and durability.
This user operaon manual has been made to instruct you for the best
use and operaon of your Sawyer product. Your sasfacon with our
products is our main goal. Please read this enre manual carefully
nong all ps, notes and warnings. Safety always comes rst.
About Us
A. Hydraulic Hose Fing
B. Pneumac Air Fing
C. Pressure Relief Valve
D. Hydraulic Cylinder Foot Release
E. 10,000 PSI Hydraulic Hose
F. Hydraulic Foot Pump
WARNING: Moving parts can snag
and pull. Keep loose items clear.
! !
WARNING
WARNING: Refer to manufactures
sengs for safety sengs.
! !
WARNING
Refer to ENERPAC manual for maintenance of ENERPAC pump.
Tools Needed for Assembly*
Air HoseAir Compressor
*Not Included
A
B
C
F
D
E
Pneumatic
Foot Pump
Manual
Model 526-20
For Models 273-15, 273-25 &
273-55
Parts Diagram

Sawyer Manufacturing Company
7799 S. Regency Dr., Tulsa, OK 74131 USA
F918.834.0318
[e-mail]
P918.834.2550
sawyermfg.com
V1.2
FOOT PUMP
1. Install Hydraulic hose ng (A, Fig. 1) from foot pump to
strap and/or tensile machine.
2. Install air hose (Fig. 3) to pneumac air ng. (B, Fig. 2)
Note: Refer to the 15, 25 & 50 Ton Guided Bend and Tensile Tester manual
for installaon procedures.
Installaon
Operaon
CAUTION: Moving parts.
! !
CAUTION
CAUTION: Refer to air compressor
safety guidelines.
! !
CAUTION
1. Before Operaon, Release the Pressure Release Valve
(C, Fig. 4) by pulling up.
2. Press foot down on the foot pump (F, Fig. 5) to depress
traveling head.
3. Press foot down on the foot release (D, Fig. 6) to relieve
pressure from traveling head.
Note: Refer to the 15, 25 & 50 Ton Guided Bend and Tensile Tester manual
for operaon procedures.
A
B
Fig. 2
Fig. 1
Fig. 2
Fig. 4
Fig. 5
C
F
D