Smeg GN166130XB User manual

GN166130XB
58 6598 0000/AD EN-AR
Refrigerator
User Manual
EN/AR

Dear Customer,
Please read this manual before using the product.
Thank you for choosing this product. We would like you to achieve the optimal efficiency
from this high quality product which has been manufactured with state of the art tech-
nology. To do this, carefully read this manual and any other documentation provided
before using the product and keep it as a reference.
Heed all information and warnings in the user manual. This way, you will protect yourself
and your product against the dangers that may occur.
Keep the user manual. Include this guide with the unit if you hand it over to someone
else.
The following symbols are used in the user guide:
Hazard that may result in death or injury.
NOTICE A hazard that may cause material damage to the product or its
surroundings
Important information or useful tips on operation.
Read the user manual.

2 /33 EN Refrigerator / User Guide
1 Safety Instructions 3
1.1 Purpose of usage . . . . . . . . . . . . . . . . . . 3
1.2 Safety of children, vulnerable persons and
pets. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
1.3 Electrical safety. . . . . . . . . . . . . . . . . . . 3
1.4 Handling Safety. . . . . . . . . . . . . . . . . . . 4
1.5 Installation Safety . . . . . . . . . . . . . . . . . 4
1.6 Operational safety . . . . . . . . . . . . . . . . . 5
1.7 Maintenance and cleaning safety. . . . . . 7
1.8HomeWhiz . . . . . . . . . . . . . . . . . . . . . . . 7
1.9 Lighting . . . . . . . . . . . . . . . . . . . . . . . . 7
2 Environmental instructions 8
2.1 Compliance with the WEEE Directive and
Disposing of the Waste Product: . . . . . . . . 8
2.2 Compliance with RoHS Directive . . . . . . . . . . 8
2.3 Package information. . . . . . . . . . . . . . . . . . . 8
3 Your Refrigerator 9
4 Installation 10
4.1 The right place for installation . . . . . . . . . . . 10
4.2 Attaching the plastic wedges . . . . . . . . . . . 10
4.3 Adjustment of the feet. . . . . . . . . . . . . . . . . 11
4.4 Electrical connection. . . . . . . . . . . . . . . . . . 12
4.5 Water connection . . . . . . . . . . . . . . . . . . . 12
4.6 Connecting water hose to the product . . . . . 13
4.7 Connecting to water mains . . . . . . . . . . . . . 13
4.8. For products using water carboy . . . . . . . . 14
4.9 Water filter . . . . . . . . . . . . . . . . . . . . . . . . . 14
4.10 Fixing external filter on the wall (Optional) . 15
4.11.Internal filter. . . . . . . . . . . . . . . . . . . . . . . 16
5 Preparation 18
5.1 What to do for energy saving . . . . . . . . . . . 18
5.2 First operation . . . . . . . . . . . . . . . . . . . . . . 18
6 Operating the Product 19
6.1 Turning off the product . . . . . . . . . . . . . . . . 19
6 Operation of the Product 20
6.2 Indicator panel . . . . . . . . . . . . . . . . . . . . . . 20
6.3 Deodoriser Module . . . . . . . . . . . . . . . . . . 22
(FreshGuard) . . . . . . . . . . . . . . . . . . . . . . . . . . 22
6.4 Humidity controlled crisper (EverFresh+) . . . 23
6.5 Blue Light/HarvestFresh . . . . . . . . . . . . . . . 23
6.6 Dairy (cold storage) bin . . . . . . . . . . . . . . . . 24
6.7 Crisper . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
6.8Ionizer. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
6.9 Odour filter . . . . . . . . . . . . . . . . . . . . . . . . 24
6.10 Taking ice / water . . . . . . . . . . . . . . . . . . 25
6.11 Drip tray . . . . . . . . . . . . . . . . . . . . . . . . . 25
6.12 Ice Machine . . . . . . . . . . . . . . . . . . . . . . 26
6.13 Freezing fresh food. . . . . . . . . . . . . . . . . . 27
6.14 Recommendations for storing frozen foods 27
6.15 Deep freezer details . . . . . . . . . . . . . . . . . 27
6.16 Placing the food . . . . . . . . . . . . . . . . . . . . 28
6.17 Door open alert . . . . . . . . . . . . . . . . . . . . 28
6.18 Illumination lamp . . . . . . . . . . . . . . . . . . . 28
7 Maintenance and cleaning 29
7.1 Stainless Steel External Surfaces. . . . . . . . . 29
7 Maintenance and cleaning 30
7.2 Cleaning of the Products with Glass Doors. . 30
7.3 Preventing Odours. . . . . . . . . . . . . . . . . . . 30
7.4 Protecting Plastic Surfaces . . . . . . . . . . . . 30
8 Troubleshooting 31

3 / 33 EN
Refrigerator / User Guide
1 Safety Instructions
This section includes the safety
instructions necessary to prevent
the risk of personal injury or material
damage.
Our company shall not be held
responsible for damages that may
occur if these instructions are not
observed.
Installation and repair operations shall always
be performed by Authorized Service.
Always use genuine spare parts and
accessories.
Original spare parts will be provided for
10 years, following the product purchasing date.
Do not repair or replace any part of the
product unless specified expressly in the user
manual.
Do not perform any modifications on the
product.
1.1 Purpose of usage
This product is not intended for commercial
use and it shall not be used out of its intended
purpose.
This product is intended for operating interiors,
such as households or similar.
For example;
- In the staff kitchens of the stores, offices and
other working environments,
- In farm houses,
- In the units of hotels, motels or other resting
facilities that are used by the customers,
- In hostels, or similar environments,
- In catering services and similar non-retail
applications.
This product shall not be used in open or enclosed
external environments such as vessels, balconies
or terraces. Exposing the product to rain, snow,
sunlight and wind may cause risk of fire.
1.2 Safety of children,
vulnerable persons and pets
This product may be used by children
aged 8 years and older and persons
with underdeveloped physical,
sensory or mental capabilities or
lack of experience and knowledge
if they have been given supervision
or instruction concerning use of the
appliance in a the product safe way
and the hazards involved.
Children between 3 and 8 years are
allowed to put and take out food to/
from the cooler product.
Electrical products are dangerous for
children and pets. Children and pets
must not play with, climb on, or enter
the product.
Cleaning and user maintenance
should not be performed by children
unless there is someone overseeing
them.
Keep the packaging materials away
from children. Risk of injury and
suffocation.
Before disposing of old products that
shall not be used any more:
1.
Unplug the power cord from the mains socket.
2.
Cut the power cord and remove it from the
appliance together with the plug.
3.
Do not remove the racks and drawers from the
product to prevent children from getting inside the
appliance.
4.
Remove the doors.
5.
Store the product so that it shall not be tipped over.
6.
Do not allow children to play with the scrapped
product.
Do not dispose of the product by throwing it
into fire. Risk of explosion.
If there is a lock available in the product’s door,
keep the key out of children’s reach.
1.3 Electrical safety
The product shall not be plugged
into the outlet during installation,

4 /33 EN Refrigerator / User Guide
Safety instructions
maintenance, cleaning, repair, and
transportation operations.
If the power the cord is damaged,
it shall be replaced by authorized
service only to avoid any risk that
may occur.
Do not tuck the power cord under the
product or to the rear of the product.
Do not put heavy items on the power
cord. The power cord should not be
bent, crushed, and come into contact
with any heat source.
Do not use an extension cord, multi-
plug or adaptor to operate your
product.
Portable multisockets or portable
power supplies may overheat and
cause fire. Thus, do not have a multi-
plug behind or in the vicinity of the
product.
The plug shall be easily accessible.
If this is not possible, a mechanism
that meets the electrical legislation
and that disconnects all terminals
from the mains (fuse, switch, main
switch, etc.) shall be available on the
electrical installation.
Do not touch the plug with wet
hands.
When unplugging the appliance, don’t
hold the power cord, but the plug.
1.4 Handling Safety
This product is heavy, do not handle it
by yourself.
Do not hold the product from its door
while handling the product.
Be careful not to damage the cooling
system and the pipes while handling
the product. Do not operate the
product if the pipes are damaged, and
contact an authorized service.
1.5 Installation Safety
Contact the Authorized Service
for the product’s installation. To
prepare the product for installation,
see the information in the user
guide and make sure the electric
and water utilities are as required.
If the installation is not suitable, call
a qualified electrician and plumber
to have them make the necessary
arrangements. Otherwise, electric
shock, fire, issues with the product or
injuries may occur.
Check for any damage on the product
before installing it. Do not have the
product installed if it is damaged.
Place the product on a level and
hard surface and balance with the
adjustable legs. Otherwise, the
refrigerator may tip over and cause
injuries.
The product shall be installed in a
dry and ventilated environment.
Do not keep carpets, rugs or similar
floor covers under the product. This
may cause risk of fire as a result of
inadequate ventilation!
Do not block or cover ventilation
holes. Otherwise, power consumption
may be increased and damage to your
product may occur.
Do not connect the product to supply
systems such as solar power supplies.
Otherwise, damage to your product
may occur as a result of the abrupt
voltage fluctuations!
The more refrigerant a refrigerator
contains, the bigger its installation
room shall be. In very small rooms,
a flammable gas-air mixture may
occur in case of a gas leak in the
cooling system. At least 1 m3of
volume is required for each 8 grams

5 / 33 EN
Refrigerator / User Guide
Safety instructions
of refrigerant. The amount of the
refrigerant available in your product
is specified in the Type Label.
The installation place of the product
shall not be exposed to direct
sunlight and it shall not be in the
vicinity of a heat source such as
stoves, radiators, etc.
If you cannot prevent installation of the product
in the vicinity of a heat source, you shall use a
suitable insulation plate and the minimum distance
to the heat source shall be as specified below.
- At least 30 cm away from heat sources such
as stoves, heating units and heaters, etc.,
- And at least 5 cm away from electric ovens.
Your product has the protection
class of I. Plug the product in a
grounded socket that conforms with
the Voltage, Current and Frequency
values specified in the type label. The
socket outlet shall be equipped with a
fuse with a rating of 10 A – 16 A. Our
company shall not be responsible for
the damages that shall be incurred
as a result of operating the product
without ensuring ground and
electrical connections made as per
local or national regulations.
The product’s power cable must
be unplugged during installation.
Otherwise, risk of electric shock and
injury may occur!
Do not plug the product to loose, broken, dirty,
greasy sockets or sockets that has come out
their seats or sockets with a risk of water
contact.
Place the power cord and hoses (if available) of
the product so that they shall not cause a risk
of tripping over.
Penetration of humidity to live parts or to the
power cord may cause short circuit. Thus, do
not use the product in humid environments or
in areas where water may splash (e.g. garage,
laundry room, etc.) If the refrigerator is wet
by water, unplug it and contact an authorized
service.
Do not connect your refrigerator to power
saving devices. These systems are harmful for
the product.
1.6 Operational safety
Do not use chemical solvents on the product.
These materials contain an explosion risk.
In case of a failure of the product, unplug it
and do not operate until it is repaired by the
authorized service. There is a risk of electric
shock!
Do not place a source of flame (e.g. candles,
cigarettes, etc.) on the product or in the vicinity
of it.
Do not get on the product. Risk of falling and
injury!
Do not cause damage to the pipes of the
cooling system using sharp and piercing tools.
The refrigerant that sprays out in case of
puncturing the gas pipes, pipe extensions or
upper surface coatings may cause irritation of
skin and injuries of the eyes.
Do not place and operate electric appliances
inside the refrigerators/deep freezer unless it is
advised by the manufacturer.
Do not jam any parts of your hands or your
body to the moving parts inside the product.
Be careful to prevent jamming of your fingers
between the refrigerator and its door. Be
careful while opening or closing the door if
there are children around.
Do not put ice cream, ice cubes or frozen food
to your mouth as soon as you take them out of
the freezer. Risk of frostbite!
Do not touch the inner walls, metal
parts of the freezer or food kept
inside the refrigerator with wet
hands. Risk of frostbite!
Do not place soda cans or cans
and bottles that contain fluids
that may be frozen to the freezer
compartment. Cans or bottles may
explode. Risk of injury and material
damage!
Do not use or place materials
sensitive against temperature
such as flammable sprays,
flammable objects, dry ice or other

6 /33 EN Refrigerator / User Guide
Safety instructions
chemical agents in the vicinity of
the refrigerator. Risk of fire and
explosion!
Do not store explosive materials
such as aerosol cans with flammable
materials inside the product.
Do not place cans containing fluids
over the product. Splashing of water
on an electrical part may cause the
risk of an electric shock or a fire.
This product is not intended for
storage and cooling of medicines,
blood plasma, laboratory preparations
or similar materials and products that
are subject to the Medical Products
Directive.
If the product is used against its
intended purpose, it may cause
damage to or deterioration of the
products kept inside.
If your refrigerator is equipped with
blue light, do not look at this light
with optical devices. Do not stare
directly at UV LED light for a long
time. Ultraviolet rays may cause eye
strain.
Do not fill the product with more food
than its capacity. Injuries or damages
may occur if the contents of the
refrigerator falls when the door is
opened. Similar problems may occur
when an object is placed over the
product.
Ensure that you have removed any
ice or water that may have fallen to
the floor to prevent injuries.
Change the locations of the racks/
bottle racks on the door of your
refrigerator while the racks are
empty only. Danger of physical injury!
Do not place objects that may fall/
tipped over on the product. These
objects may fall while opening or
closing the door and cause injuries
and/or material damages.
Do not hit or exert excessive pressure
on glass surfaces. Broken glass
may cause injuries and/or material
damages.
The cooling system in your product
contains R600a refrigerant. The
refrigerant type used in the product
is specified in the the type label.
This gas is flammable. Therefore, be
careful not to damage the cooling
system and the pipes while operating
the product. In case of damage to the
pipes;
- do not touch the product or the power cord,
- Keep the product away from potential sources
of fire that may cause the product to catch fire.
- ventilation the area where the product is
placed. Do not use a fan.
- Contact authorized service.
If the product is damaged and you
observe gas leak, please stay away
from the gas. Gas may cause frostbite
if it contacts your skin.
For Products With Water Fountain / Ice Maker
Use only drinking water. Do not fill the water
tank with fruit juice, milk, fizzy beverages,
alcoholic beverages or any other liquids
incompatible for use in the water fountain. This
may cause risk to your health and safety.
Do not allow the children to play with the water
dispenser or Ice Maker to prevent accidents
and injuries.
Do not insert your fingers or other objects
inside the hole of the water dispenser, ice
channel or inside the container of the Ice
Maker. This may cause injuries or material
damages.

7 / 33 EN
Refrigerator / User Guide
Safety instructions
1.7 Maintenance and
cleaning safety
Do not pull by the door handle if you
shall move the product for cleaning
purposes. Handle may cause injuries
if it is pulled too hard.
Do not clean the product by spraying
or pouring water on the product and
inside the product. Risk of electric
shock and fire.
Do not use sharp or abrasive tools
to clean the product. Do not use
materials such as household cleaning
agents, detergents, gas, gasoline,
alcohol, wax, etc.
Use cleaning and maintenance
agents that are not harmful for food
only inside the product.
Do not use steam or steamed
cleaning materials for cleaning the
product and thawing the ice inside it.
Steam contacts the live areas in your
refrigerator and causes short circuit
or electric shock!
Take care to keep water away from
the electronic circuits or lighting of
the product.
Use a clean, dry cloth to wipe the dust
or foreign material on the tips of the
plugs. Do not use a wet or damp piece
of cloth to clean the plug. Otherwise,
risk of fire or electric shock may occur.
1.8HomeWhiz
(May not be applicable for all models)
Follow the safety warnings even if
you are away from the product while
operating the product via HomeWhiz
app. Also, pay attention to the
warnings in the app.
1.9 Lighting
(May not be applicable for all models)
Contact an authorized service when
you shall replace the LED / bulb using
for lighting.

8 /33 EN Refrigerator / User Guide
2 Environmental instructions
2.1 Compliance with the WEEE
Directive and Disposing
of the Waste Product:
This product complies with EU WEEE Directive
(2012/19/EU). This product bears a classification
symbol for waste electrical and electronic equip-
ment (WEEE).
This symbol indicates that this product
shall not be disposed with other house-
hold wastes at the end of its service life.
Used device must be returned to offical
collection point for recycling of electrical
and electronic devices. To find these collection sys-
tems please contact to your local authorities or re-
tailer where the product was puchased. Each
household performs important role in recovering
and recycling of old appliance. Appropriate disposal
of used appliance helps prevent potential negative
consequences for the environment and human
health.
2.2 Compliance with RoHS Directive
The product you have purchased complies with EU
RoHS Directive (2011/65/EU). It does not contain
harmful and prohibited materials specified in the
Directive.
2.3 Package information
Packaging materials of the product are
manufactured from recyclable materials
in accordance with our National
Environment Regulations. Do not dis-
pose of the packaging materials together with the
domestic or other wastes. Take them to the pack-
aging material collection points designated by the
local authorities.

9 / 33 EN
Refrigerator / User Guide
3 Your Refrigerator
C*Optional: Figures in this user guide are schematic and may not be exactly match your product. If your
product does not comprise the relevant parts, the information pertains to other models.
May not be available in all models
2
1
*3
*3
*3
*3
5
*4
6 6
7
7
*8
*10
*9*
11
12
12
13
14
15
15
15
1.
Freezer compartment
2.
Cooler compartment
3.
Cooler compartment door shelves
4.
Egg Holder
5.
Bottle shelf
6.
Adjustable stands
7.
Crispers
8.
Dairy (cold storage) bin
9.
Bottle shelf
10.
Glass shelves
11.
Fan
12.
Frozen food storing compartments
13.
Freezer compartment glass shelf
14.
Ice machine
15.
Freezer compartment door shelves
*Optional

10 /33 EN Refrigerator / User Guide
4 Installation
4.1 The right place for installation
ARead the “Safety Instructions” section first!
Your product requires adequate air circulation to
function efficiently. If the product will be placed in an
alcove, remember to leave at least 5 cm clearance
between the product and the ceiling, rear wall and
the side walls.
If the product will be placed in an alcove, remember
to leave at least 5 cm clearance between the
product and the ceiling, rear wall and the side
walls. Check if the rear wall clearance protection
component is present at its location (if provided with
the product). If the component is not available, or
if it is lost or fallen, position the product so that at
least 5 cm clearance shall be left between the rear
surface of the product and the wall of the room.
The clearance at the rear is important for efficient
operation of the product.
AWARNING: Do not use extension or multi
sockets in power connection.
BWARNING: The manufacturer assumes
no responsibility for any damage caused
by the work carried out by unauthorized
persons.
BWARNING: The product's power cable
must be unplugged during installation.
Failure to do so may result in death or
serious injuries!
A
WARNING: : If the door span is to
narrow for the product to pass, remove
the door and turn the product sideways; if
this does not work, contact the authorized
service.
vibration.
the heater, stove and similar sources of heat
and at least 5 cm away from electric ovens.
keep in damp environments.
function efficiently. If the product will be placed
in an alcove, remember to leave at least 5 cm
distance between the product and the ceiling
and the walls.
4.2 Attaching the plastic wedges
Use the plastic wedges in the provided with
the product to provide sufficient space for air
circulation between the product and the wall.
1.
To attach the wedges, remove the screws on
the product and use the screws provided with the
wedges.
2.
Attach 2 plastic wedges on the ventilation cover as
shown in the figure.

11 / 33 EN
Refrigerator / User Guide
Installation
4.3 Adjustment of the feet
If the product is not in balanced position, adjust the
front adjustable stands by rotating right or left.
In order to adjust the doors vertically,
position of the door
In order to adjust the doors horizontally,
Loosen the fixing screw at the bottom
Loosen the fixing bolt on the top
Screw the adjusting bolt (CW/CCW) on the side
according to the position of the door
Tighten the fixing bolt on the top for the final
position
Tighten the fixing screw at the bottom
Fixing nut
Fixing screw
Sabitleme somunu
Sabitleme vidası
fixing nut
adjusting nut
adjusting bolt
fixing bolt
ayar somunu
ayar civatası
sabitleme
civatası
sabitleme somunu

12 /33 EN Refrigerator / User Guide
Installation
4.4 Electrical connection
AWARNING: Do not use extension or
multi sockets in power connection.
BWARNING: Damaged power cable
must be replaced by Authorized
Service.
Our firm will not assume responsibility for any
damages due to usage without earthing and
power connection in compliance with national
regulations.
The power cable plug must be easily
accessible after installation.
C
Hot surface warning!
The side walls of your product are
equipped with cooler pipes to enhance
the cooling system. High pressure fluid
may flow through these surfaces, and
cause hot surfaces on the side walls.
This is normal and it does not require
servicing. Be careful when you contact
these areas.
4.5 Water connection
(Optional)
AWARNING: Unplug the product and
the water pump (if available) during
connection.
The product’s water mains, filter and carboy
connections must be rendered by authorizer
service. The product can be connected to a carboy
or directly to the water mains, depending on the
model. To establish the connection, the water hose
must first be connected to the product.
Check to see the following parts are supplied with
your product’s model:
3
1
4
2
*5
1. Connector (1 piece): Used to attach the water
hose to the rear of the product.
2. Hose clip (3 pieces): Used to fix the water
hose on the wall.
3. Water hose (1 piece, 5 meter diameter 1/4
inches): Used for the water connection.
4. Faucet adapter (1 piece): Comprises a porous
filter, used for connection to the cold water
mains.
5. Water filter (1 piece *Optional): Used to
connect the mains water to the product. Water
filter is not required if carboy connection is
available.

13 / 33 EN
Refrigerator / User Guide
Installation
1
23
4.6 Connecting water hose to the
product
To connect the water hose to the product,
follow the instructions below.
1. Remove the connector on the hose nozzle
adaptor in the back of the product and run the
hose through the connector.
2. Push the water hose down tightly and connect
to the hose nozzle adaptor.
3. Tighten the connector manually to fix on the
hose nozzle adaptor. You may also tighten the
connector using a pipe wrench or pliers.
4.7 Connecting to water mains
(Optional)
To use the product by connecting to the cold water
mains, a standard 1/2” valve connector must be
installed to the cold water mains in your home. If
the connector is not available or if you are unsure,
consult a qualified plumber.
1. Detach the connector (1) from the faucet
adaptor (2).
1
2
3
2. Connect the faucet adaptor to the water mains
valve.
3. Attach the connector around the water hose.
4. Connect the other end of the hose to the
water mains (See Section 4.7) or, to use
carboy, to the water pump (See Section 4.8).

14 /33 EN Refrigerator / User Guide
Installation
1. Attach the connector into the faucet adaptor
and tighten by hand / tool.
2. Connect the other end of the water hose to
the water pump by pushing the hose into the
pump’s hose inlet.
2. To avoid damaging, shifting or accidentally
disconnecting the hose, use the clips provided
to fix the water hose appropriately.
AWARNING: After turning the faucet
on, make sure there is no water leak on
either end of the water hose. In case of
leakage, turn the valve off and tighten
all connections using a pipe wrench or
pliers.
4.8. For products using water carboy
(Optional)
To use a carboy for the product’s water
connection, the water pump recommended by the
authorized service must be used.
1. Connect one end of the water hose provided
with the pump to the product (see 4.6) and
follow the instructions below.
3. Place and fasten the pump hose inside the
carboy.
4. Once the connection is established, plug in
and start the water pump.
CPlease wait 2-3 minutes after starting the
pump to achieve the desired efficiency.
CSee also the pump’s user guide for water
connection.
CWhen using carboy, water filter is not
required.
4.9 Water filter
(Optional)
The product may have internal or external filter,
depending on the model. To attach the water filter,
follow the instructions below.

15 / 33 EN
Refrigerator / User Guide
Installation
4.10 Fixing external filter on the wall
(Optional)
AWARNING: Do not fix the filter on the
product.
Check to see the following parts are supplied with
your product’s model:
1. Connector (1 piece): Used to attach the water
hose to the rear of the product.
2. Faucet adapter (1 piece): Used for connection
to the cold water mains.
3. Porous filter (1 piece)
4. Hose clip (3 pieces): Used to fix the water
hose on the wall.
5. Filter connecting apparatus (2 pieces): Used to
fix the filter on the wall.
6. Water filter (1 piece): Used to connect the
product to the water mains. Water filter is not
necessary when using carboy connection.
1. Connect the faucet adaptor to the water mains
valve.
2. Determine the location to fix the external filter.
Fix the filter’s connecting apparatus (5) on the
wall.
3. Attach the filter in upright position on the filter
connecting apparatus, as indicated on the
label. (6)
4. Attach the water hose extending from the top
of the filter to the product’s water connection
adaptor, (see 4.6.)
After the connection is established, it should look
like the figure below.
123
4
5
6

16 /33 EN Refrigerator / User Guide
Installation
4.11.Internal filter
The internal filter provided with the product is not
installed upon delivery; please follow the instructions
below to install the filter.
1. “Ice Off” indicator must be active while
installing the filter. Switch the ON-OFF
indicator using the “Ice” button on the screen.
Water line:
Carboy line:
2. Remove the vegetable bin to access the water
filter.
CDo not use the first 10 glasses of
water after connecting the filter.

17 / 33 EN
Refrigerator / User Guide
Installation
Remove the water filter by-pass cover by
pulling.
CA few drops of water may flow out
after removing the cover; this is
normal.
1. Place the water filter cover into the
mechanism and push to lock in place.
2. Push the “Ice” button on the screen again to
cancel the “Ice Off” mode.
CThe water filter will clear certain foreign
particles in the water. It will not clear the
microorganisms in the water.

18 /33 EN Refrigerator / User Guide
5 Preparation
5.1 What to do for energy saving
mehmet
AConnecting the product to electronic
energy-saving systems is harmful, as it
may damage the product.
For a freestanding appliance; ‘this refrigerating
appliance is not intended to be used as a built-
in appliance’ ;
Do not keep the refrigerator doors open for
long periods.
Do not place hot food or beverages into the
refrigerator.
Do not overfill the refrigerator; blocking the
internal air flow will reduce cooling capacity.
Depending on the product's features;
defrosting frozen foods in the cooler
compartment will ensure energy saving and
preserve food quality.
Food shall be stored using the drawers in the
cooler compartment in order to ensure energy
saving and protect food in better conditions.
Make sure the foods are not in contact with
the cooler compartment temperature sensor
described below.
energy while maintaining the freshness of your
foodstuff.
In case of multiple options are present glass
shelves must be placed so that the air outlets
at the backwall are not blocked, prefably air
outlets are remaining below the glass shelf.
This combination may help impoving air
distribution and energy efficiency.
ARead the “Safety Instructions” section first!
5.2 First operation
Before using your refrigerator, make sure the
necessary preparations are made in line with
the instructions in "Safety and environment
instructions" and "Installation" sections.
Keep the product running without placing any
food inside for 12 hours and do not open the
door, unless absolutely necessary.
CA sound will be heard when the
compressor is engaged. It is normal to
hear sound even when the compressor is
inactive, due to the compressed liquids
and gasses in the cooling system.
CIt is normal for the front edges of the
refrigerator to be warm. These areas are
designed to warm up in order to prevent
condensation.
CFor some models, indicator panel turns off
automatically 1,5 minutes after the door
closes. It will be reactivated when the door
is open or any button is pressed.
Since hot and humid air will not directly
penetrate into your product when the doors are
not opened, your product will optimize itself
in conditions sufficient to protect your food.
In this energy saving function, functions and
components such as compressor, fan, heater,
defrost, lighting, display and so on will operate
according to the needs to consume minimum

19 / 33 EN
Refrigerator / User Guide
6 Operating the Product
ARead the “Safety Instructions” section first!
Do not use any mechanical tools or any
other tools than the recommendations of the
manufacturer to speed up the thawing operation.
Do not use parts of your refrigerator such
as the door or drawers as a support or a step.
This may cause the product to trip over or its
components to be damaged.
The product shall be used for storing food
only.
Turn off the water valve if you will be away
from home (e.g. at vacation) and you will not be
using the Ice Maker or the water dispenser for a
long period of time. Otherwise, water leaks may
occur.
6.1 Turning off the product
period;
- unplug it,
- remove the food to prevent odours,
- wait until the ice is thawed,
- clean the inside and wait until it is dried.
- leave the doors open to prevent damage to internal
body plastics.
Table of contents
Languages:
Other Smeg Refrigerator manuals
Popular Refrigerator manuals by other brands

GE
GE cafe Owner's manual and installation instructions

Zanussi
Zanussi ZQS 6124 Instruction booklet

Tricity Bendix
Tricity Bendix FD970W Operating and installation instructions

Vestfrost
Vestfrost CW 278 W user manual

Fust NOVAMATIC
Fust NOVAMATIC EK617RE user manual

Frigidaire
Frigidaire FRT21IS6B Factory parts catalog