SMSL SH-6 User manual

本说明书的内容可能会随版本更改, 如有变动, 恕不另行通知,
如需最新说明, 请到https://www.smsl-audio.com/
下载最新版本的说明书。
Ver 1.0
使用说明书

请将本音响系统安装在通风良好、阴凉、干燥、干净的位置,远离直射阳光热源
、振 动 、灰 尘 、 潮湿或寒冷。
只能使用本机指定的电压。使用高于指定数值的电压很危险,而且可能导致火
灾,损坏本机或造成人身伤害。对于使用高于指定电压造成的任何损害,
我司
将不负任何责任。
不要试图自行改造或修理本机。如果需要任何服务,请与销售或者我司客服人
员联系。不管有任何理由,都没有打开机壳的必要。
如果打算长时间不使用本机(比如度假时),请从墙壁交流电源插座上断开电
源线的连接。
一、服务期限
佛山双木三林科技有限公司承诺产品的良好品质,产品自售出之后7天内
正常使用情况下出现故障,客户可以选择退货或者保修(不影响二次销售
才可退货)。正常使用一年内出现故障可以免费保修。
二、购买日期以销售商开出的购机发票或收据日期为准,网购可以交易截图为准。
三、有以下情况都不能享受“三包”服务
1.一切人为因素损坏,包括非正常工作环境下使用或不按照说明书使用。
2.用户私自拆机、改装、维修。
3.使用非指定或许可的配件造成损坏的。
4.机身的QC或保修贴损毁。
5.不能出示有效购机凭证。
6.不属于本公司产品。
四、保修方式为送修
此条款只适于中国大陆,其它地区请参考当地销售代理商的规定和国家法规。
重要提示:
本说明书内容如有更新,恕不另行通知.若您使用的产品功能与说明书不一致
时,请以产品为准!
安全注意事项
保修条款

产品特点
超低失真精密反馈电路, 失真度低至0.00006%!
超低噪声电源设计, 使输出噪声低到1.3uV(APX555B实测值, 不是等效值!)
经典复古拨动开关操作 ;
超紧凑设计,非常适合桌面耳机系统 ;
高精度低温漂电阻,性能不受温度影响 ;
高品质继电器和无冲击声设计 ;
16欧姆输出功率达2.6W,32欧时达到1.3W ;
20Hz至500kHz频率响应 ;
高低两档可切换增益控制 ;
耳机放大器具有直流,过 压 等全面保护 ;
使用高效低噪声的电源系统 。
超低失真精密反馈电路, 失真度低至0.00006%!
超低噪声电源设计, 使输出噪声低到1.3uV(APX555B实测值, 不是等效值!)
经典复古拨动开关操作 ;
超紧凑设计,非常适合桌面耳机系统 ;
高精度低温漂电阻,性能不受温度影响 ;
高品质继电器和无冲击声设计 ;
16欧姆输出功率达3W,32欧时达到1.5W ;
20Hz至500kHz频率响应 ;
高低两档可切换增益控制 ;
耳机放大器具有直流,过 压 等全面保护 ;
使用高效低噪声的电源系统 。

技术参数
输入方式 ...............................................................................................非平衡x1
耳放输出方式 ..........
...............................................
..................6.35mm单端x1
前级输出方式 ..........
...............................................
...........................非平衡x1
输出功率 ...................................................................................2.6W x 2 (16 Ω)
.........................................
.................................
..........1.3W x 2 (32 Ω)
信噪比 ......................................................................................................134dB
剩余噪音 ...................................................................................................1.3uV
THD+N .......................................................... -123dB, 0.00006% (1kHz , 32 Ω)
THD+N ...........................................-118dB, 0.00012% (20-20kHz , 32 Ω, 0dB)
THD ................................................................................... <-125dB,0.00006%
输入阻抗 ....................................................................................................47kΩ
耳放输出阻抗 .......................................................................................接近 0 Ω
前级输出阻抗 .............................................................................................22 Ω
频率响应 ...........................................................................20Hz - 500kHz(-3dB)
增益 ......................................................................................低(0dB),高(15.5dB)
能量功耗(EN60065) ..................................................................................<30W
待机功耗 .................................................................................................<0.1W
体积 ..........................................................................140X28X115mm(WxHxD)
重量 ......................................................................................... 0.38kg / 0.84Ibs
规格时有变更,恕不另行通知。

部件介绍
2
34
5
旋钮
6.35mm耳机插座
增益选择
输出选择
指示灯注
RCA输入
RCA前级输出
接地端子
AC电源输入接口
电源开关
5
6
7
1
2
3
4
8
9
注:
1.连接耳机前请调小音量, 以免音量过大损坏耳机;
2.根据健康专家的建议,请勿长时间聆听耳机以免影响听力;
3.使用本产品时,请用带屏蔽的RCA线材。
4.指示灯状态:
a.红色表示待机状态,红色闪烁表示系统触发保护;
b.白色表示耳放输出;
c.绿色表示前级输出。
5.指示灯亮度调节:
a.将输出选择开关切换到前级模式,增益选择开关切换到高增益,然后
再给机器通电;
b.通电后操作增益开关,由高增益→低增益→高增益→低增益此时指示
灯变成蓝色;
c.然后控制增益选择开关在高增益→低增益间切换调整指示灯亮度;
d.当调整完成后,指示灯变为绿色后,表示退出亮度调节。
10
678 9 10
1

The contents of this manual may change with the version,
if there is any change without notice, please go to
https://www.smsl-audio.com/
Download the latest version of the manual.
Ver 1.0
USER MANUAL

Install this unit in a well ventilated, cool, dry, clean place-away from direct sunlight, heat
sources, vibration, dust, moisture, or cold..
Use the voltage specified on this unit Only. Using this unit with a higher voltage than
specified is dangerous and may cause fire , damage to this unit, or personal injury. Our
company will not be held responsible for any damage resulting from the use of this unit
with a voltage other than that specified.
Do not attempt to modify or fix this unit by yourself. Contact alesperson or customer
service when any service is needed. The cabinet should never be opened for any reason.
When not planning to use this unit for long periods of time (i.e. when going on vacation),
disconnect the power cable from the AC wall outlet.
Important note:
The product specifications and information mentioned in this manual are for reference
only. The content of this manual is subject to change without notice.
1.The Term of Service
Foshan Shuangmusanlin Technology Co., Ltd promises to offer good-quality products. If the
product is broken in 7 days after purchasing when you use it normally, you can choose to
send it back for return, replacement or repairing (only the product does not affect the
second sales can be returned ). Repairing for free in one year if you use it normally.
2.Date of purchase is in accordance with the date on invoice or receipt uesd by seller, and if
you buy it on line, you can show the screenshot of trade.
3.If an inappropriate usage causes the unit damaged, the warranty will be void. As below.
4.Sending it back to our company for repairing.
5.Contact your S.M.S.L Audio reseller for a return or replacement.
All damages by inappropriate use, including using it under non-normal working
environment or without following the instructions.
Dismantling, refitting, repairing by user in private.
Causing damage by using some fittings instead of the designative or accredited ones.
Cannot provide credible proof of purchase.
Safety Notes
Warranty Terms

Features
Ultra-low distortion precision feedback circuit, distortion as low as
0.00006%!
Ultra-low noise power supply design, so that the output noise is as low as
1.3uV (APX555B measured value, not equivalent);
Classic Toggle Switch for Operation;
Ultra-compact design, suitable for desktop headphone system;
High precision low temperature drift resistance, its performance is not
affected by temperature;
High quality relays and popless sound design;
2.6 Watts into 16 Ohm,1.3 Watts into 32 Ohm;
20 Hz to 500 kHz Frequency Response;
High and low two gears can switch gain control;
The headphone amplifier has DC,comprehensive protection such as
overvoltage and thermal protection;
Use high-efficiency and ultra-low noise power system.

Specifications
Input.............................................................................................Unbalanced x1
Headphone output..........................................................6.35mm unbalanced x 1
Pre-output.................................................................................... unbalanced x 1
Output Power...............................................................................2.6W x 2 (16 Ω)
...............................................................................1.3W x 2 (32 Ω)
SNR............................................................................................................134dB
Output Noise..............................................................................................1.3uV
THD+N............................................................. -123dB, 0.00006% (1kHz, 32 Ω)
THD+N.............................................-118dB, 0.00012% (20-20kHz , 32 Ω, 0dB)
THD.......................................................................................<-125dB,0.00006%
Input Impedance......................................................................................... 47kΩ
Amp output Impedance..........................................................................Near 0 Ω
Pre-out Impedance...................................................................................... 22kΩ
Frequency Response........................................................... 20Hz - 500kHz(-3dB)
Gain............................................................................... Low(0dB) ,High(15.5dB)
Power consumption(EN60065).................................................................. <30 W
Power consumption in standby mode........................................................ <0.1W
Size............................................................................ 140X28X115mm(WxHxD)
Weight.........................................................................................0.38kg / 0.84Ibs
Specifications are subject to change without notice.

Display Interface and Instructions
6.35mm headphone jack
RCA input
56
Ground terminal 9
7RCA-pre out 8
Knob
Output switch
Gain switch
Indicator light
NOTE
1 2 3
4
Power AC input
2
34
51
678 9 10
10 Power switch
Note:
1. Please turn down the volume before connecting the headphones to avoid
excessive volume damage to the headset.
2. According to the advice of health experts, do not listen to the headphones
for a long time so as not affect your hearing.
3. Please use RCA cables with shielded to connect with this device.
4. Indicator status:
a. Red lights for standby, red flashing means system trigger protection;
b. White lights is amp output indicator;
c. Green lights for pre-amp output.
5. Indicator light brightness adjustment:
a.switch the output switch to the PRE mode, the gain selection switch to
HIGH.
b.Then power on the machine, and operate the gain switch, from high gain
→low gain →high gain →low gain. The light turns blue.
c.Then control the gain selector switch to switch between high gain →low
gain to adjust the brightness of the indicator light.
d. When the adjustment is completed, the indicator light turns green,
indicating that the brightness adjustment is finished.
Table of contents
Other SMSL Amplifier manuals