Snap-On SSX22P157 User manual

Please read and save the user manual.
Warning and reminder:
•To reduce the risk of fire or electric shock, do
not expose this product to moisture or rain.
•Do not place the product near any open flame.
•Only use the supplied charger to charge.
•Do not leave charging for more than 3 hours.
•Do not use the product to hit something.
•Do not disassemble, repair, or modify by yourself.
•Please properly dispose of battery and old
electronic parts.
•This product uses a rechargeable internal
battery, the battery can not be disassembled.
•Please charge once a month to extend the
battery life, even if you do not use the product.

Designed and Engineered in U.S.A.
Made in China.
Snap-on and Wrench “S” are trademarks of
Snap-on Incorporated and used under license.
All other marks are trademarks of their
respective holders. ©2022 Snap-on
Incorporated. Printed in China.
Snap-on, 2801 80th St., Kenosha, WI 53143
www.snapon.com
The Bluetooth® word mark and logos are
registered trademarks owned by Bluetooth SIG, Inc.
and any use of such marks by Snap-on Incorporated
and Jonco Industries is under license. Other
trademarks and trade names are those of their
respective owners.

BT Karaoke Microphone
SSX22P157
USER MANUAL

Microphone Volume
Echo
Power ON/OFF
Mode Button: Short press to change between Modes (Bluetooth
or TransFlash (TF)) / Double press to pair to another Snap-on
Bluetooth Karaoke Microphone.
Short press to select the previous song / Long press the main
volume is reduced.
Short press play / pause / Long press to eliminate the original
singing voice.
Short press to select the next song / Long press the main
volume increase.
TransFlash (TF) card socket: Support for playing MP3 format tracks.
Micro 5V charging port.
Charging indicator: Red light when charging, when fully
charged red light goes out.
Function key introduction and interface function definition:
10
9
8
7
6
5
4
3
1
2

Mobile phone holder: Pull the phone holder out of the slide,
open the stand, and then insert the phone into the holder.
Microphone
Operating Manual
Bluetooth connection:
Long press on / off “ ” button, you will hear “Power On”, the
microphone is in Bluetooth mode. Turn on the Bluetooth device
(such as mobile phone) and select “SO BT Karaoke Microphone”,
when you hear “Bluetooth Connected”, the pairing is successful.
Bluetooth Pairing:
1. If you want to pair, you need two Snap-on®Bluetooth
Karaoke Microphones.
2. Make sure both microphones are disconnected from any
Bluetooth devices.
3. Turn on the two microphones, rapidly double-click the Mode
button “ ” of one microphone after entering the Bluetooth mode.
The microphone will sound a “Dong” tone to indicate that another
microphone is being connected, this can take up to 30 seconds.
They are now paired successfully.
4. Open the device’s Bluetooth settings, search the microphone’s
pairing name and connect, you can connect both the paired
microphones within your device’s Bluetooth settings.
5. To disconnect the pairing, turn off Bluetooth mode on device
then double-click mode button “ ” and you will hear a “DingDong”.
TransFlash (TF) Card Socket: To play your own MP3 recorded
music insert a TF Card with downloaded files into port. You can
switch between Bluetooth mode and TF mode by short pressing
the mode button “ ” on microphone.
11
12

Eliminate the Human Voice:
Long press the microphone “ ” button to directly remove the
human voice, and then long press the “ ” button to return voice.
Charging Operation:
Please use the supplied charging cable, insert the USB port
into the DC5V charger jack, connect the Micro USB port to the
microphone charging port for charging, and the charging indicator
light is steady red until the indicator light is fully charged.
Specifications:
Output Power : THD=1%, 5W×1
Bluetooth version : 5.3
Speaker unit : 50mm rubber side, 4Ω5W
Diaphragm Specifications : 50mm, 1.5mm thick iron sheet,
55 degrees rubber side
Frequency response : 100Hz-12KHz
Pickup : Capacitive
Echo : PT2399
Battery Specifications : Built-in 18650 / 1500mA.h 3C lithium-ion
Charging voltage : DC5V / 1A (Common with mobile phone
adapter)
Full charge time : About 3 hours
Product weight : 450g
Product Size : 85mm×(H)197mm
Accessories
Microphone : 1pcs
USB Cable : 1pcs
User Manual : 1pcs

FCC Statement
Changes or modifications not expressly approved by the party responsible for compliance could void the
user's authority to operate the equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant
to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference
to radio communications. However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or television reception, which can
be determined by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
-- Consult the dealer or an experienced radio/TV technician for help
This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions
(1)this device may not cause harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.