Socket CompactFlash Connection Kit User manual

CompactFlash Connection Kit
with Bluetooth®Wireless Technology
Featuring the Cordless Card and software for adding Bluetooth
capability to Pocket PCs and other Windows Mobile-based
devices with CompactFlash slots
User’s Guide
®

1/2007 Document # 6410-00171 O
Copyright Notice
Copyright © 2006-2007 Socket Communications, Inc. All rights reserved.
Socket, the Socket logo and Battery Friendly are registered trademarks of
Socket Communications, Inc. Mobility Friendly is a trademark of Socket
Communications, Inc. Bluetooth and the Bluetooth logos are trademarks
owned by Bluetooth SIG, Inc., U.S.A. and licensed to Socket
Communications, Inc. All other brand and product names are trademarks of
their respective holders.
The Cordless Card includes technology licensed under United States Patent
Nos. 7,003,627.
Reproduction of the contents of this manual without the permission of
Socket Communications is expressly prohibited. Please be aware that the
products described in this manual may change without notice.
Feel free to contact SOCKET COMMUNICATIONS at:
Socket Communications, Inc.
37400 Central Court
Newark, CA 94560
USA
Other than the above, Socket Communications can assume no responsibility
for anything resulting from the application of information contained in this
manual.
Socket Communications requests that you refrain from any applications of
the Socket Connection Kit with Bluetooth Wireless Technology that are not
described in this manual. Socket Communications also requests that you
refrain from disassembling the CF card. Disassembly will void the product
warranty.
You can track new product releases, software updates and technical
bulletins by visiting Socket’s website at: www.socketcom.com.
2

Table of Contents
COPYRIGHT NOTICE 2
1 | INTRODUCTION 5
About the Software 5
System Requirements 6
Package Contents 6
Product Registration 7
Other Packages Available 7
2 | INSTALLATION 8
STEP 1: Install the Software 9
STEP 2: Complete the Bluetooth Setup Wizard 12
STEP 3: Insert the Card 14
Turning the Radio Transmitter ON/OFF 15
Enabling/Disabling IrDA Ports 16
3 | MY BLUETOOTH DEVICE MANAGER 17
Opening the Device Manager 17
General Device Settings 18
Assign COM Ports 19
Configure Object Sharing 20
4 | BLUETOOTH DEVICES FOLDER 21
Access the Bluetooth Devices Folder 21
Discover Bluetooth Device(s) 22
Bond with Discovered Device(s) 24
View Device Properties 26
Set up Your Favorite Device 27
Change Views 28
Delete a Device from the Folder 28
5 | SERIAL PORT 29
STEP 1: Enable Bluetooth Serial COM Port 30
STEP 2: Prepare Bluetooth Serial Device 30
STEP 3: Discover Bluetooth Serial Device 31
STEP 4: Bond with Bluetooth Serial Device 31
STEP 5: Configure Application for Connection 32
6 | OBJECT EXCHANGE 33
Exchange Business Cards 34
Send a Contact 36
Send a File 38
Browse Remote Device 39
3

Receive Contact or File 44
Enable File Sharing 44
7 | ACTIVESYNC AND LAN ACCESS 45
8 | DIAL-UP NETWORKING 48
STEP 1: Prepare Network Information 48
STEP 2: Get Connected! to Bluetooth Phone 49
STEP 3: Create a Dial-up Connection Profile 52
STEP 3: Dial-up to Your Network 56
Automatic Phone Connections 61
9 | SOCKET DIALER 62
10 | FAXING AND PRINTING 65
APPENDICES:
A | SPECIFICATIONS 70
B | SAFETY AND USAGE TIPS 71
C | GLOSSARY 73
D | TROUBLESHOOTING 76
E | TECHNICAL SUPPORT 78
LIMITED WARRANTY 80
REGULATORY COMPLIANCE 82
4

1 | INTRODUCTION
The Socket Connection Kit with Bluetooth Wireless Technology makes it
easy to add Bluetooth capability to a Pocket PC or other Windows Mobile-
based device. Available with the CompactFlash Cordless Card, the
Connection Kit is perfect for connecting Pocket PCs wirelessly to a variety
of Bluetooth enabled devices.
With the kit, you can connect your Windows Mobile-based device to
Bluetooth enabled devices such as:
•Bar code scanners
•GPS receivers
•Desktop, laptop and tablet PCs
•LAN access points
•Mobile phones and modems
•Printers
•PDAs
•Faxes
Socket’s cards are the only plug-in cards to incorporate all Bluetooth
components, including the antenna, within the CompactFlash Type I form
factor. Compact card design means increased portability and less chance of
damage during usage. The CompactFlash Socket Cordless Card fits entirely
within a CompactFlash slot.
About the Software
The Windows Mobile versions of the Connection Kit with Bluetooth
Wireless Technology feature a complete suite of intuitive and easy-to-use
software that make it easy to create, configure, and manage your Bluetooth
connections.
•Bluetooth Setup Wizard — Immediately after software installation, this
wizard launches to help you prepare your device name and COM ports
for Bluetooth connectivity, so you’ll be ready to connect.
•Bluetooth Devices folder — This utility makes it easy to manage your
Bluetooth connections with intuitive graphics and handy wizards,
including the Device Discovery Wizard and Device Bonding Wizard.
CHAPTER 1: INTRODUCTION 5

•Socket OBEX — This allows you to exchange business cards, transfer
files, and browse the contents of another mobile computer.
•Bluetooth ActiveSync — This feature helps you synchronize data with
another Bluetooth enabled computer.
•Bluetooth LAN Access — This feature helps you connect to a Bluetooth
enabled access point for wireless Internet and network access.
•Get Connected! Wizard — This handy wizard guides you through the
process of connecting to a phone for dial-up networking.
•Socket Dialer — With this program, all it takes is a tap on a name in
your contact list, and your mobile computer will have your phone start
dialing the number. (for Windows Mobile 2003/2003SE only)
•PrintPocketCE — This third-party software allows you to print directly
from your mobile computer to any Bluetooth enabled printer. A trial
version is provided on the installation CD.
System Requirements
Minimum device requirements:
•Windows Mobile 2003, 2003SE or 5.0
•Available CF or PC Card (PCMCIA) slot
•CF-to-PC Card adapter required for use in PC Card slot
Software installation requires ActiveSync 4.0 or greater. Download it free
from: www.socketcom.com/activesync
Get software updates at:
www.socketcom.com/support/support_bluetooth.asp
PC Card adapters are available separately at www.socketcom.com/shop
Package Contents
The Socket Connection Kit includes these items:
•Socket Cordless Card (CompactFlash Type I)
•Software installation CD
•Booklets with copyright, warranty, and regulatory compliance information
6

Product Registration
Socket highly recommends that all customers register their Socket products.
Registered users receive the following benefits:
•Priority for technical support
•Special offers for future products and product updates
•The latest new product information
Register online at: www.socketcom.com/prodreg.
Other Packages Available
Besides the Connection Kits for Windows Mobile, Socket offers these
Bluetooth packages:
•Connection Kit with Adapter — This product includes hardware and
software for Windows Mobile, 2000, and XP. Package includes the
Socket Cordless Card, a CF-to-PC Card adapter, and a software
installation disc. Purchase online at: www.socketcom.com/shop
•Windows Upgrade Kit — This kit is designed for customers who already
own a CF Connection Kit for Windows Mobile and want to add support for
Windows 2000 and XP. Package includes a CF-to-PC Card adapter and a
software installation disc. Purchase online at:
www.socketstore.com/product.asp?sku=2014297
•Class 1 USB Adapter— This adapter plugs into the USB port of a Windows
2000 or XP computer to provide Class 1 Bluetooth wireless technology,
with a range of up to 100 meters (300 feet). Package includes the USB
adapter and a software installation disc. Purchase online at:
www.socketstore.com/product.asp?sku=2565223
CHAPTER 1: INTRODUCTION 7

2 | INSTALLATION
This chapter covers installation instructions for the Connection Kit with
Bluetooth Wireless Technology. After completing the installation
instructions in this chapter, proceed to the appropriate chapter for your
device and application.
Installation Summary
STEP 1: Install the software
STEP 2: Complete the Bluetooth Setup Wizard
STEP 3: Insert the card into your mobile computer
Turn transmitter on/off
Enable/disable IrDA port
8

STEP 1: Install the Software
Note: The OBEX and Socket Dialer software are optional to install. Do not
install them until you have already installed the main Bluetooth software.
ADVANCED USERS: Refer to the README file for CAB installation instructions.
Follow these steps to install the software BEFORE inserting the Socket card.
1. Use ActiveSync and a serial/USB cable or cradle to make an active
connection between the mobile computer and a host PC.
IMPORTANT! ActiveSync 4.0 or greater is required.
ActiveSync should report “Connected,” and the ActiveSync icon should
turn green.
2. Insert the Socket installation CD into the host PC.
3. Use My Computer or Windows Explorer to access your CD drive. In the
CD contents, click on Setup.exe
4. A screen will appear for you to choose which language to install the
software in. Click on the appropriate choice.
CHAPTER 2: INSTALLATION 9

5. The Setup Center will launch in your browser. Follow the instructions
on your screen to begin the software installation.
•Read the information in the first screen, then click next.
•In the Main Page, click Install Software.
•In the Installation screen, scroll down to read the instructions for
Windows CE, then click on the Windows CE link.
6. A File Download screen will appear from your web browser. Select the
option that lets you RUN or OPEN the file. Some web browsers may
require you to save the file before you can open it.
Note: If your web browser warns that you are opening an EXE file,
continue opening the file anyways.
10

7. The Socket Bluetooth Software Setup program will begin. Follow the
wizard to install the software on your Windows Mobile-based device.
8. If desired, install the software for Socket OBEX and/or the Socket
Dialer. In the Socket Connection Kit Setup Center, in the Installation
Page scroll down and click Socket OBEX or Socket Dialer.
Note: The Socket Dialer works only with Windows Mobile 2003/2003SE
and is not compatible with all Bluetooth enabled phones. Socket has
verified compatibiltity with Nokia and Ericsson phones and incompatibility
with the Motorola 270c, NTT DoCoMo Paldio 633S, and Sony au C413S
phones. Results may vary with other phones that are not officially
supported by the Socket Connection Kit.
CHAPTER 2: INSTALLATION 11

STEP 2: Complete the Bluetooth Setup Wizard
1. After you install the software, the Socket Bluetooth Setup Wizard will
automatically launch on your device. Tap Next.
2. In the next screen, give your device a friendly name that other devices
will see when they search for other Bluetooth enabled devices. Tap
Next.
12

3. If your device has fewer than 6 COM ports available, the Disable
IrDA? Screen will appear so you can free more ports. Tap Next.
4. In the next screen, choose the four ports and services that you plan to
use most often. After making your selections, tap Next.
Note: You cannot disable
the Bluetooth Phone
(DUN) port.
5. In the last screen, read the instructions and tap Finish.
6. Windows Mobile 5.0: A screen will report that the CAB file was
successfully installed. Tap ok.
7. IMPORTANT!!! Remove your device from the cable/cradle and soft
reset the device by pressing the reset button.
CHAPTER 2: INSTALLATION 13

STEP 3: Insert the Card
IMPORTANT! Do NOT insert the card upside down or shove the card in
too hard. Damage may occur!
1. Insert the card into your device’s card slot. Make sure the card is right-
side up. Push the card all the way in. When properly inserted, the CF
card will be fully contained within the slot.
•If using a PC Card slot, first plug the CF Card into a PC
Card adapter. When properly inserted, the card and
adapter will be fully contained within the slot.
2. If your device was turned off, it will turn on after you insert the card.
3. After a few seconds, the device will recognize the card, indicated by
the Bluetooth icon at the bottom of the Today screen.
Note: If a bubble reports that a new modem was detected, tap Dismiss.
14

Turning the Radio Transmitter ON/OFF
You may want to turn off the radio transmitter to save power or if you are
entering an area with radio restrictions (e.g., an airplane).
1. After you insert the card, the Bluetooth icon should appear at the
bottom of the Today screen. Tap on the icon.
2. In the pop-up menu, select Turn Transmitter OFF.
Note: The menu will list
Transfer via Bluetooth only
if you installed Socket
OBEX.
3. The card’s radio transmitter will shut off. The Bluetooth icon in the task
bar will become gray, as will menu options that require the radio to be
turned on.
4. To turn the radio transmitter back on, tap on the gray Bluetooth icon. In
the pop-up-menu, select Turn Transmitter ON.
CHAPTER 2: INSTALLATION 15

Enabling/Disabling IrDA Ports
The Socket IrDA utility allows you to enable/disable the infrared port of
your device to provide additional ports for Bluetooth connections.
1. Tap Start | Settings | System tab | IrDA.
2. Select the IrDA setting and tap ok.
5. A dialog will direct you to soft reset your device. Tap ok.
6. Soft reset your device by pressing the reset button.
16

3 | MYBLUETOOTH DEVICE MANAGER
The Device Manager allows you to configure settings for your Cordless
Card, including:
•Friendly Name
•Discoverable, connectable, and connection security settings
•Enable/disable COM ports
•Assign your business card and folder for object sharing
Note: The Object Sharing tab will appear only if you installed the optional
OBEX software.
Opening the Device Manager
1. After you insert the card, the Bluetooth icon should appear at the
bottom of the Today screen. Tap on the icon.
2. In the pop-up menu, select Advanced Features, then My Bluetooth
Device.
Note: Transfer via
Bluetooth will appear
only if you installed
Socket OBEX.
3. The Bluetooth Device Manager will appear, with the General screen
open. Tap on the tabs on the bottom to view additional device
properties.
CHAPTER 3: MY BLUETOOTH DEVICE MANAGER 17

General Device Settings
Note: If you use the Get Connected! Wizard to connect to a phone, then this
step is not necessary.
In the My Bluetooth Device screen, you can modify the Friendly Name as
well as connection settings.
If you want to initiate a connection from your mobile computer (e.g., for
most dial-up networking and printing applications):
•Discoverable: You do not need to enable this.
•Connectable: You do not need to enable this.
If you want to accept a connection from another Bluetooth enabled device
(e.g., to connect to a Socket Cordless Serial Adapter set to Initiator mode):
•Discoverable: Check this box.
•Connectable: Check this box.
Note: If you enable Discoverable mode, it does not shut off by itself. To
conserve power, manually disable this feature when not in use.
Use Authentication: Check this box if you want to require a passkey to
connect with another Bluetooth enabled device. If either or both devices use
authentication, you must enter a passkey to connect.
Use Encryption: Check this box to connect to Bluetooth enabled LAN
access points that use WEP encryption.
IMPORTANT! After you finish configuring all of your settings, tap ok to
exit the Device Manager and make the settings take effect!
18

Assign COM Ports
Follow these steps to view and/or modify the Bluetooth COM ports.
1. Tap on the COM Ports tab. As needed, view and/or enable/disable the
Bluetooth COM port assignments.
Note: The Bluetooth
Phone port cannot be
disabled.
2. To disable a COM port, uncheck a box. In the next screen, click Yes.
IMPORTANT! After you finish configuring all of your settings, tap ok to
exit the Device Manager and make the settings take effect!
CHAPTER 3: MY BLUETOOTH DEVICE MANAGER 19

Configure Object Sharing
1. Tap on the Object Sharing tab.
2. To assign a business card or folder for others to remotely access, tap on
the appropriate Assign button. After selecting the contact or folder, tap ok.
IMPORTANT! After you finish configuring all of your settings, tap ok to
exit the Device Manager and make the settings take effect!
20