SodaMagic Maxi User manual

1
SodaMagic 'Maxi'
Sparkling Water Machine
Instruction Manual
ENG
SodaMagic

2
Contact
SodaMagic
Room D, 7/F
Hollywood Centre
77-91 Queen's Road West
Sheung Wan
Hong Kong
Tel: [phone]
Fax: [phone]
E-mail: [e-mail]
www.SodaMagic.hk

3
Content
Parts and Features
4
Install the CO2 Cylinder
5
How to Use
7
Care and Cleaning
9
Troubleshooting
11
Important Safeguards
12
Guarantee and Registration
13

4
Parts and Features
Thank you for using our product. To properly
understand how to use this product, please read
this instruction manual before use.
What your SodaMagic 'Maxi' can do
The SodaMagic 'Maxi' combines innovative product
design with the latest technology to deliver one of
the world's best compact soda makers.
Carbonate your tap water
Before the first use
With the SodaMagic 'Maxi' you can make
carbonated water, personalized to your taste, in the
comfort of your home.
Hand wash the water bottle in warm soapy water
and rinse. Wipe outside with a soft cloth to dry.
Never wash the water bottle in dishwasher. Harsh
chemicals will damage the water bottle.
The SodaMagic 'Maxi' kit
or
PET Water Bottle
Sparkling Water Machine
CO2 Cylinder
Scope of Delivery:
The quantity and design of the accessories may differ depending on the Special Offer being promoted.

5
Install the CO2 Cylinder
Note:
Only use SodaMagic CO2 cylinder and water
bottles. Never carbonate if the water bottle is
empty, not completely filled or not fully inserted.
1)
2)
Remove water bottle by pulling the water bottle
forward and turning clockwise to unlock.
Remove the back cover.
3)
4)
Unscrew the protective cap.
or
Remove seal and twist off the cap from the CO2
cylinder.

6
Install the CO2 Cylinder
5) Using cylinder for up to 52 Liters
Insert the CO2 cylinder through the opening on the
bottom of the unit. Insert threaded part of the CO2
cylinder into the unit receptacle and hand-tighten.
6) Using cylinder for up to 117 Liters
7) Using cylinder for up to 117 Liters
Take out the cylinder holder (for the smaller
cylinder) when the bigger cylinder is used.
Insert the CO2 cylinder through the opening on
the bottom of the unit. Insert threaded part of the
CO2 cylinder into the unit receptacle and hand-
tighten.
8)
9)
Insert threaded part of the CO2 cylinder into the
unit receptacle and hand-tighten.
Put back the back cover.

7
How to Use
1)
2)
Remove water bottle by pulling the water bottle
forward and turning clockwise to unlock.
Fill water bottle with VERY COLD water to the
MAX fill line.
WARNING! Dried flavor syrups may clog the
carbonation nozzle. Add flavors after carbonation
only.
3)
4)
To insert the bottle, make sure that the carbonating
block is in its fully upward position and the bottle
loader tab is angled forward.
Insert filled water bottle and turn counter-clockwise
until it can not be turned, then push the bottle
towards the unit to a vertical position.
Press carbonating button to begin carbonation.
Push 2-3 times the carbonating button then stop
when you hear a hissing sound.
Carbonation can be made stronger or lighter by
pressing for more or less time.

8
How to Use
5)
6)
Pull the water bottle forward to release the
pressure inside the bottle.
Remove water bottle by turning clockwise to
unlock.
7)
Enjoy your sparkling beverage!
Cap and refrigerate the water bottle to preserve the
carbonation of the water.

9
Care and Cleaning
Rinse the water bottle with clean water
after each use.
The water bottle should not be cleaned in
the dishwasher.
The water temperature shall not be higher
than +40° C (+120° F). Use mild detergent
only.
Clean the water bottle carefully and
periodically.
If you do not intend to use the water bottle
any time soon, leave the water bottle open,
letting the inside dry out completely.
To clean the carbonating unit, wipe with a damp
cloth. Do not immerse the carbonating unit in
water. Do not use any solvents or abrasive
cleaners, since this could damage the surface.

10
Care and Cleaning
WARNING!!!
Damaged water bottles can fail during carbonation.
Hand wash with soap and warm water. Never place
the water bottle in dishwasher. Never use brushes,
abrasives, or chemical cleaners. Replace water
bottle if it is scratched, deformed or beyond the
expiration date.
Tips for best results
Use the coldest water possible.