Sodex Sport S12660 Dimensions

DETAILS
SODEX INTERNATIONAL
18 rue de l’Avenir - Bât. 224
14650 CARPIQUET
Phone: + 33 (0) 2.31.53.78.70
Email: [email protected]
DESCRIPTION
structure 140x140
Galvanized steel
Plastified
CONFORM
European standard
EN 748
PRODUCT SHEET
FOOTBALL COUNTERWEIGHT
PRODUCT REF :S12660 PAIR
TEST AFTER INSTALLATION
This counterweight is designed to be used as transportable football goals accessory.
According to the decree above, for the first installation the goal must be tested like below :
-Put a vertical and static charge of 180 kg, on the middle of the crossbar,
- Put an horizontal charge of 110kg at the same point
After testing, the equipment and the fixation system or counterweight should not fail, displace or deform.
When the goal is not used it must be sealed or be stocked somewhere that people can’t used it.
During the first installation, this stability and solidity test is compulsory.
Every time that the equipment is assembled, a visual check of the stability and solidity must be realized.
The owner must regularly check the condition of the product, and be sure that it meets the current safety standards.
In order to use our products at there best, it is recommended to follow carefully the notice of instruction, where you
can find the conditions of assembly ; installation ; maintenance ; storing..
MAINTENANCE
The equipment has to be regularly maintained by the owner. It is advised to:
- Check every week that all the screws are correctly tightened
- Fix paint defects if the module has been damaged, using the adapted paint, specified by the manufacturer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
- Clean the product by using dishwasher soap, clean water, and soft cloth.
It is advised to carry out this cleaning once or twice a year, or even more regularly according to the environmental
conditions (saline environment, …) .
If the forecast planned a bad weather (strong wind,…), the goal should be removed from the sheaths and put on the
ground.
WARRANTY
One full year parts and labour guarantee. Every claim regarding condition of the delivered equipment has to be done
within the legal period of the reception of the material. The warranty will not apply to:
- all degradation during the transport.
- all degradation due to use differing from which was intended.
- all degradation due to poor maintenance.
- any defect claimed after the end of the legal period.
- any damage due to a faulty installation and assembly of the module

2
ASSEMBLY INSTRUCTION
NECESSARY
ITEMS
NECESSARY TOOLS (NOT INCLUDED)
INCLUDED ITEMS
1 – GUIDING TO SAND (x2)
Wrench 17mm
Note: Weight must be at least 68Kg
STEP 1:
Open the caps
STEP 2:
Fill sand into the counterweight
STEP 3:
Close the caps
Screws
Phillips Screwdriver
8X SS SCREW
ISO M10X30 8X SS WASHER Ø10 16X SS SCREW ISO M5x10
X16
Screw M5x15

3
2 - ADAPTORS ASSEMBYING
SS Screw ISO M10x30
+ washer INOX Ø10
ADAPTORS AS THE
PROFILES MAY BE
S12660-01— for oval profile Ø120
S12660-03— pour profilé rond Ø90
S12660-02— for round profile Ø101.6
S12660-04— for round profile Ø80
S12660-05— for round profile Ø34
example with S12660-01
example with S12660-05
NECESSARY
ITEMS
ASSEMBLY INSTRUCTION
Note: Each of the five adaptors fits with a goal’s profile. These adaptors join then tighten
the metallic profile on the counterweights, stopping any translation of the goals.
8X SS SCREW
ISO M10X30
8X SS WASHER Ø10

NOMENCLATURE
Package
N° Ref Index Designation Description Quanti- ty Packing Method Weight (kg) Dim. (mm)
A1 S12660a HCOUNTERWEIGHT 1Plastic bubbles +
Carton 2 layers 20 820x560x160
A2 S12660a HCOUNTERWEIGHT 1Plastic bubbles +
Carton 2 layers 20 820x560x160
PRE-ASSEMBLED ACCESSORIES
PACKING LIST
FOOTBALL COUNTERWEIGHT
PRODUCT REF S12660 Index H PAIR
VISA PACKING DEPARTMENT DATE :
Package
N° Ref Designation Description Qty Note
A1+A2 Rubber 105x80 4Stick on the
undersurface of
counterweights
A1+A2 Rubber 80x80 8Stick on the undersurface of
counterweights
A1+A2 PVC sliding rings 8Fix the roll
A1+A2 Rolls 4Fix the counterweights
A1+A2 Pins 4Fix the roll
A1+A2 BITH030
LITA102510 SS Screw M10x25 + SS washers Ø10 8+16 Fix the adapter
A1+A2 BITK0510 Screws 5x15 16 Fix the counterweights
A1+A2 Rubber U lg 560mm 4Put at the end on the
counterweight
A1+A2 Stickers 2Stick on the counterweight, at
200mm of the cap