Sodex Sport S12200 User manual

DETAILS
SODEX INTERNATIONAL
18 rue de l’avenir – Bât. 224
14650 CARPIQUET
Tel: + 33 (0) 2.31.53.78.70
Email: [email protected]
DESCRIPTION
Steel Structure ø101.6
Powder coated
7.32m x 2.44m
CONFORM
European Standard
EN 748
ASSEMBLY INSTRUCTION
FOOTBALL GOAL, TUBE 101.6
PRODUCT REF:S12200 PAIR
TEST AFTER INSTALLATION
According to the reglementation, for the first installation the goal must be tested like below :
Put a vertical and static charge of 320 kg, at the jonction of the pannel and the basket , at 0.20m of the ground, du-
ring one minute.
During the first installation, this stability and solidity test is compulsory.
Every time that the equipment is assembled, a visual check of the stability and solidity must be realized.
The owner must regularly check the condition of the product.
MAINTENANCE
The equipment has to be regularly maintained by the owner. It is advised to:
- Check every week that all the screws are correctly tightened
- Fix paint defects if the module has been damaged, using the adapted paint, specified by the manufacturer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
- Clean the product by using dishwasher soap, clean water, and soft cloth.
It is advised to carry out this cleaning once or twice a year, or even more regularly according to the environmental
conditions (saline environment, …).If the forecast planned a bad weather (strong wind,…), the goal should be remo-
ved from the sheaths and put on the ground.
WARRANTY
One full year parts and labor guarantee. Every claim regarding condition of the delivered equipment has to be done
within the legal period of the reception of the material. The warranty will not apply to:
- all degradation during the transport.
- all degradation due to use differing from which was intended.
- all degradation due to poor maintenance.
- any defect claimed after the end of the legal period.
- any damaged due to a faulty installation and assembly of the module

2
NB: All the dimension are in millimeter
- Dig the holes for the sealing of the sockets accor-
ding to the dimensions indicated on drawing below
- Fill the sealings with CPJ 45 concrete dosed at 350
kg/m³. Let the concrete set for a minimum of 72h.
- Pour the concrete inside and precisely position the
sleeves at the indicated distances.
- Position the socket while stalling all the method so
the goal can located in the position
deployed definitive .
PENETRATION OF POST IN THE SOCKET: 350 mm
IMPLANTATION & SOCKETED
Concrete socketed

3
ASSEMBLY
NECESSARY
TOOLS
NECESSARY TOOLS (NOT INCLUDED)
INCLUDED ITEMS
1- ASSEMBLY OF THE POSTS TO THE CROSSBAR (x4)
X4
Bolt BC M10x25
X4
Washer BC 10
Wrench 17mm
Bolt BC M10x25 +
Washer 10
X4
Bolt BC M10x25
X4
Washer BC 10

4
NOMENCLATURE
Package
Nº Ref Index Designation Description Quantity Packing method Weight (kg) Dim. (mm)
A1 S12200-01 ACrossbar 1Plastic bubbles +
cardboard 5 layers 41 7560X210X130
A2 S12200-01 ACrossbar 1Plastic bubbles +
cardboard 5 layers 41 7560X210X130
A3 S12200-02 APost 1Plastic bubbles +
cardboard 5 layers 30 2830X300X130
A4 S12200-02 APost 1Plastic bubbles +
cardboard 5 layers 30 2830X300X130
A5 S12572 ASocket + Cover 4 + 4 Plastic bubbles 4.6 620x140x120
PRE-ASSEMBLED ACCESSORIES
Package
Nº Designation Description Qty Note
A3 +
A4 Bolt BC M10x25 + Washer BC 10 4 + 4 To fix the posts together
A1 +
A2 +
A3 +
A4
Hook 1 fixation +
screw 4.8x19 80+ 80 To fix to the goal
A3 +
A4 Conformity label 2
VISA PACKING DEPARTMENT DATE :
PACKING LIST
FOOTBALL GOAL, TUBE 101.6
PRODUCT REF S12200 Index A PAIR