Sodex Sport S18020GC Dimensions

DESCRIPTION
Steel structure Ø76
Hot Dip Galvanised
3.00m x 2.00m
CONFORM
European Standard
EN 749
PRODUCT SHEET
MULTI-FUNCTION GOAL, 3x2M
PRODUCT REF S18020GC UNIT
ASSEMBLY TIME
The assembly time of a goal is estimated, for 1 person, at 15 minutes. (without sealing).
TEST AFTER INSTALLATION
In application of the above regulation, this goal must be sealed when it is used.
According to the regulation, for the first installation the goal must be tested like below:
-Put 180kg at 20cm from the ground and in the middle of the crossbar during 1min.
-Apply an horizontal force of 110 kg on the middle of the crossbar, thanks to a 3 meters rope, during
1min.
After these tests, the equipment and the fixation system should not have break, move or show residual deformation.
During the first installation, this stability and solidity test is compulsory.
Every time that the equipment is assembled, a visual check of the stability and solidity must be realized.
The owner must regularly check the condition of the product.
For an optimal use of our products, we advise to follow the installation and maintenance instructions.
MAINTENANCE
The equipement has to be regularly maintained by the owner. It is adviced to:
- Check every week that all the screws are correctly tightened
- Fix paint defects if the module has been damaged, using the adapted paint, specified by the manufactu-
rer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
- Clean the product by using dishwasher soap, clean water, and soft cloth.It is adviced to do this cleaning
once or twice a year, or more in case of aggressive environmental conditions (seaside...).
WARRANTY
One full year parts and labor guarantee. Every claim regarding condition of the delivered equipment has to
be done within the legal period of the reception of the material. The warranty will not apply to:
- all degradation during the transport.
- all degradation due to use differing from which was intended.
- all degradation due to poor maintenance.
- any defect claimed after the end of the legal period.
- any damaged due to a faulty installation and assembly of the module

2
FIXATION AND SEALING
NB: All the dimension are in millimeter.
INSTALLATION OF THE POST IN THE SOCKET: 350 mm
- Dig the holes for the front sealing according
to the written dimensions.
- Seal with concret CPJ45 dosed by 350 kg
and wait at least 72 hours (6 days during win-
ter ). For the front sealing put correctly the
socket on the hole before cooling the concrete.
1538mm 1538mm
Goal line
Sealing
Post axis
Axis of the penalty point
3076mm

3
ASSEMBLY
1- ASSEMBLY OF THE POSTS TO THE CROSSBARS (x2)
NECESSARY
ITEMS
NECESSARY TOOLS (NOT INCLUDED)
INCLUDED ITEMS
SS Screws M10x20+
SS Washers 10
Wrench 17mm
x4
SS Lock nuts M10
SS Screws M10x20
x4

NOMENCLATURE
Pack-
age N° Ref Index Designation Description Quanti- ty Packing Method Weight (kg)
Dim.
(mm)
A1 S18020GC-01 BCrossbar 1No packing 15.5 3160x210x80
A2 S18020GC-02 CPost 1No packing 10.5 2340x80x80
A3 S18020GC-02 CPost 1No packing 10.5 2340x80x80
ASSEMBLED ACCESSORIES
Pack-
age N° Ref Designation Description Qty Note
A2+A3 BITH1020 +
LITA102510
SS Screws M10x20 +
SS Washers 10 4 + 4
A2 Conformity stickers 1
VISA PACKING DEPARTMENT DATE :
PACKING LIST
MULTI-FUNCTION GOAL, 3M x 2M
PRODUCT REF S18020GC Index C UNIT