Sodex Sport S80103 User manual

1
DETAILS
SODEX INTERNATIONAL
18 rue de l’Avenir - Bât. 224
14650 CARPIQUET
Phone: + 33 (0) 2.31.53.78.70
Email: [email protected]
DESCRIPTION
Steel structure ф90
Plastified
CONFORM
European norm
NF EN 16630
PRODUCT SHEET
SURFING BOARD
PRODUCT REF :S80103 UNIT
MAINTENANCE
The equipement has to be regularly maintained by the owner. If one of the modules has to be repaired,
users should not be able to access to it until the repair is done. To ensure good use, routine visual ins-
pections are required, paying special attention to the following points: The cleanliness, ground clearance,
surface condition, visible foundations, sharp edges , missing parts, excessive wear of moving parts and
the structural integrity. Moreover, a more thourough functional check should be carried out every two
months on the following points:
- Check that all the screws are correctly tightened
- Remove all the non expected elements (ex: stickers, clothes, ropes,…)
- Fix paint defects if the module has been damaged, using the adapted paint, specified by the manufactu-
rer.
- Replace all damaged or missing parts with a spare part recommended by the manufacturer.
- Check that all the instruction labels stuck on the modules are in condition and are readable. Replace
them if necessary.
- Check the stability of the modules. If one of them is sligthly unfixed from the foundation,
- Check that all the anchors are secure in the ground.
- Clean all dirty parts with soapy water.
Every year, it is recommended to check carefully the ground fixation. In order to do this, remove the dirt
covering the attachment plate, and inspect cautiously the wear of the fixations and of the concrete. Re-
place them if necessary. Check that the screws are firmly tightened.
WARRANTY
One full year parts and labor guarantee. Every claim regarding condition of the delivered equipment has to
be done within the legal period of the reception of the material. The warranty will not apply to:
- all degradation during the transport.
- all degradation due to use differing from which was intended.
- all degradation due to poor maintenance.
- any defect claimed after the end of the legal period.
THIS PRODUCT HAS BEEN BUILT AND DESIGNED ACCORDING TO THE FRENCH AND EUROPEAN STANDARD EN-NF 16630

2
TECHNICAL DETAILS AND DRAWINGS
Height of free fall: 630 mm
Evolution zone area: 17 m²
Dimensions
Exercise space and evolution space

3
USER MANUAL
Precautions:
- Be careful during the access and
egress to the module
- Only one person at a time
Muscular strengthening:
This module is ideal to reinforce:
- stomach muscles
Example:
Place your foot on the support and grab the han-
dles. Move your lower body from left to right. Try to
keep your chest as still as possible for a better effi-
ciency.
Restrictions:
- This equipment is dedicated to adults and
teenagers over 1400 mm.
- Maximum authorized weigth: 120 kg
- Not recommanded for pregnant women
and for people suffering from heart
deseases

4
FIXATION & SEALING
NECESSARY TOOLS (NOT INCLUDED)
INCLUDED ITEMS
Fixing kit M14
Dig 2 holes for the concrete according to the drawing above.
The dimensions of the holes are:
- Depth : 0.75 m
- Width : 0.5 m
- Length : 0.5 m
NB: All the dimensions are in millimeter
x2 x8 x16 x16
Shovel Wrench 22

5
FIXATION & SEALING
NECESSARY
ITEMS
- Pour concrete (EN 206-1), and stop when you are at 25cm of the surface.
- Insert the attachments plates into the concrete, ensuring they are settled vertically.
- Assemble the plate attachments as follow:
- Let the concrete set during 3 or 4 days.
Fixing kit M14
x2 x8 x16 x16

6
FIXATION & SEALING
Remove the nuts and the washers from the at-
tachment plates. Mount the equipment onto the
attachment plate and fix them together thanks
to the fixing kit already used.
Fill the gap with dirt, then cover.
NECESSARY
ITEMS

7
NOMENCLATURE
Package
N° Ref Index Designation Description Quantity Packing Method Weight (kg)
Dim.
(mm)
A1 S80103-01 AMain frame 1
Plastic
bubbles+cardb
oard 5 layers
91 1470x1400x1
120
A2 S80103-02 AAccessories 1
Plastic
bubbles+cardb
oard 5 layers
6300x280x100
PRE-ASSEMBLED ACCESSORIES
Package
N° Designation Description Qty Note
A1 Stickers 1 + 1 Stuck on the struc-
ture
A1 Balls bearings 6206
RS1 4
A1 Spacers 2
A1 Self-tapping screws
M5x12 6
A1 Poignées D25 4
A1 Locknuts BC M14 +
Washers M14 2 + 2
A1 Rubber stops 4
ACCESSORIES PUT IN PVC CLEAR BAG
Package
N° Designation Description Qty Note
A2 Fixing kit M14 2 + 8 + 16 + 16 To be put in the
ground
A2 Stickers 1 + 1 To replace the stick-
ers when damaged
VISA PACKING DEPARTMENT DATE :
PACKING LIST
FITNESS SURFING BOARD
PRODUCT REF S80103 Index A UNIT